Component guide · Intermediate · 4 min read
Starlight Low-Light Pi Cameras

IMX462 (Arducam, Waveshare), IMX290 Day and Night, IMX291 and IMX327 IR-CUT
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Sony STARVIS sensors such as the IMX462, IMX290 and IMX327 are made for security cameras: large 2.9 µm pixels see in very low light, and the IMX462 is especially sensitive to near infrared. Boards with an IR-CUT filter switch between true colour by day and IR night vision. They record 1080p and suit wildlife cameras, doorbells and night monitoring.
Key specs at a glance
- Sensor
- Sony IMX462, IMX290, IMX291 or IMX327 (2MP)
- Resolution
- 1920 x 1080, up to 60 fps
- Low light
- Down to about 0.001 lux class with IR
- IR-CUT
- Switched filter on IR-CUT boards (motorized on some)
- Interface
- MIPI CSI-2
- Lens
- M12, fixed or wide angle
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Arducam 2MP Sony IMX462 Ultra Low Light STARVIS Camera Module w/ 141° M12 Lens for Raspberry Pi₹6,089
Option 2Arducam 2MP Ultra Low Light STARVIS IMX462 Motorized IR-CUT Camera for Raspberry Pi₹7,149
Option 3Waveshare IMX462 2MP IR-CUT Starlight Camera for Raspberry Pi₹4,139
Option 4Waveshare IMX462-127 IR-CUT 2MP Starlight Camera Sensor w/ ISP₹8,429
Option 5Waveshare IMX462-99 IR-CUT Starlight Camera, 2MP, 99° FOV₹8,499
Option 6Arducam IMX290 1080P Day Night Vision MIPI Camera for Raspberry Pi₹4,409
What the Starlight IMX462, IMX290 and IMX327 low-light cameras is
Starlight IMX462 and IMX290 cameras use Sony sensors with very high low-light sensitivity, giving colour video at night for security, astronomy and Raspberry Pi projects.
Use dtoverlay=imx290,clock-frequency=74250000 (or 37125000, check the board) for IMX290 and IMX462 on Raspberry Pi OS; IMX327 boards use the same driver.
IR-CUT boards switch the filter from a GPIO or a light sensor. Add IR LEDs at 850 nm for darkness.
Starlight IMX462, IMX290 and IMX327 low-light cameras pinout
The pins on the Starlight IMX462, IMX290 and IMX327 low-light cameras and what each one does.
| Pin | Function |
|---|---|
| CSI ribbon (15 or 22-pin) | Camera data lanes, clock, I2C control and power in one flat cable |
| Metal contacts | Face the connector contacts; a reversed cable gives 'no cameras available' |
| Lens mount | Fixed, M12 or CS/C mount depending on the board |
| IR-CUT / focus motor | Driven over the same ribbon on boards that have them |
- CSI ribbon (15 or 22-pin)
- Camera data lanes, clock, I2C control and power in one flat cable
- Metal contacts
- Face the connector contacts; a reversed cable gives 'no cameras available'
- Lens mount
- Fixed, M12 or CS/C mount depending on the board
- IR-CUT / focus motor
- Driven over the same ribbon on boards that have them
Wiring the Starlight IMX462, IMX290 and IMX327 low-light cameras
Turn the Pi off before connecting. Lift the connector latch, push the ribbon fully in with the contacts facing the pins, then press the latch down. The Pi 5 and Zero use the smaller 22-pin connector.
| Starlight IMX462, IMX290 and IMX327 low-light cameras pin | Raspberry Pi 5 | Raspberry Pi 4 |
|---|---|---|
| Ribbon cable | CAM/DISP 0 or 1 (22-pin, use a 15-to-22 cable) | CAMERA port (15-pin) |
| Power | From the ribbon (no extra wires) | From the ribbon (no extra wires) |
| Software | rpicam-apps / Picamera2 (Bookworm) | rpicam-apps / Picamera2 (Bookworm) |
- Ribbon cable
- Raspberry Pi 5:
- CAM/DISP 0 or 1 (22-pin, use a 15-to-22 cable)
- Raspberry Pi 4:
- CAMERA port (15-pin)
- Power
- Raspberry Pi 5:
- From the ribbon (no extra wires)
- Raspberry Pi 4:
- From the ribbon (no extra wires)
- Software
- Raspberry Pi 5:
- rpicam-apps / Picamera2 (Bookworm)
- Raspberry Pi 4:
- rpicam-apps / Picamera2 (Bookworm)
Example code
Check the camera first with rpicam-hello --list-cameras. Third-party sensors usually need camera_auto_detect=0 and the right dtoverlay= line in /boot/firmware/config.txt, or the maker's driver package. Longer exposures: cam.set_controls({'ExposureTime': 100000, 'AnalogueGain': 8.0}).
from picamera2 import Picamera2
from picamera2.encoders import H264Encoder
import time
cam = Picamera2()
cam.configure(cam.create_still_configuration())
cam.start()
time.sleep(2) # let exposure and white balance settle
cam.capture_file("night.jpg")
cam.stop()
video = cam.create_video_configuration(main={"size": (1920, 1080)})
cam.configure(video)
cam.start_recording(H264Encoder(10_000_000), "clip.h264")
time.sleep(10)
cam.stop_recording()Setup and tuning
use the imx290 overlay on Raspberry Pi OS for compatible modules.
IMX462 is sensitive to near-IR; use IR-cut versions for daytime colour.
use M12 or CS lenses with large apertures for night.
set longer exposure and gain for night scenes.
add 850 nm IR LEDs for dark scenes.
What you need
Shop this list13 of 13 found in our store · ₹98,415
Arducam 2MP Sony IMX462 Ultra Low Light STARVIS Camera Module w/ 141° M12 Lens for Raspberry Pi: the part this guide coversArducam 2MP Sony IMX462 Ultra Low Light STARVIS Camera Module w/ 141° M12 Lens for Raspberry Pi₹6,089
Arducam 2MP Ultra Low Light STARVIS IMX462 Motorized IR-CUT Camera for Raspberry Pi: another version this guide coversArducam 2MP Ultra Low Light STARVIS IMX462 Motorized IR-CUT Camera for Raspberry Pi₹7,149
Waveshare IMX462 2MP IR-CUT Starlight Camera for Raspberry Pi: another version this guide coversWaveshare IMX462 2MP IR-CUT Starlight Camera for Raspberry Pi₹4,139
Waveshare IMX462-127 IR-CUT 2MP Starlight Camera Sensor w/ ISP: another version this guide coversWaveshare IMX462-127 IR-CUT 2MP Starlight Camera Sensor w/ ISP₹8,429
Waveshare IMX462-99 IR-CUT Starlight Camera, 2MP, 99° FOV: another version this guide coversWaveshare IMX462-99 IR-CUT Starlight Camera, 2MP, 99° FOV₹8,499
Arducam IMX290 1080P Day Night Vision MIPI Camera for Raspberry Pi: another version this guide coversArducam IMX290 1080P Day Night Vision MIPI Camera for Raspberry Pi₹4,409
Waveshare IMX290 2MP Camera Module (A) for Raspberry Pi: another version this guide coversWaveshare IMX290 2MP Camera Module (A) for Raspberry Pi₹5,769
Waveshare IMX290-83 IR-CUT Starlight Camera Sensor, 2MP Fixed-Focus: another version this guide coversWaveshare IMX290-83 IR-CUT Starlight Camera Sensor, 2MP Fixed-Focus₹3,229
Waveshare IMX291 2MP IR-CUT Camera for Raspberry Pi: another version this guide coversWaveshare IMX291 2MP IR-CUT Camera for Raspberry Pi₹5,372
Waveshare IMX327 2MP IR-CUT Starlight Camera for Raspberry Pi: another version this guide coversWaveshare IMX327 2MP IR-CUT Starlight Camera for Raspberry Pi₹4,459
Raspberry Pi 5 (4 GB): the computer the camera plugs intoRaspberry Pi 5 16GB RAM Single Board Computer₹36,169Closest match, check the specs
Raspberry Pi 4 Model B (4 GB): works with the standard 15-pin cableRaspberry Pi 4 Model B 1GB RAM₹4,476Closest match, check the specs
15-pin to 22-pin camera cable: for Raspberry Pi 5 and Zero boardsArducam CB008 3.8cm 15-Pin to 22-Pin Camera Cable for Raspberry Pi Zero/W₹227
Alternatives and when to choose them
- OV5647 night vision: cheaper IR cameras.
- Global shutter: fast motion.
- Thermal cameras: see heat, not light.
Common mistakes to avoid
- No IR-cut filter for daytime colour.
- Slow lenses for night.
- Wrong overlay.
- Short exposure at night.
Frequently asked questions
Why use IMX462 for night vision?
Its high sensitivity gives clear images in very low light.
Does it work on Raspberry Pi?
Yes, with the imx290 overlay on modules made for the Pi.
Why are daytime colours pink?
The module has no IR-cut filter; choose an IR-cut version for daytime colour.
Can it be used for astronomy?
Yes, it is popular for planetary and meteor cameras.
Which lens should I choose?
A fast lens like f/1.2 to f/1.6 for night.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.


