Component guide · Intermediate · 9 min read
Tarot Carbon Booms, Z25 and Z30 Folding Arm Joints, X8 and T810 Frame Plates

Landing Gear and Motor Mounts, Plus Flywoo Plates and Replacement Arms
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Frame parts let you build or repair multirotors. Carbon tubes (8 to 30 mm) form the arms, aluminium folding joints (Z25, Z30) let them fold for transport, and plates, canopies, landing gear and motor mounts finish the frame. Match tube diameter to the joint or mount, and check each part's frame model.
Key specs at a glance
- Tubes and booms
- Carbon 3K, 8 to 30 mm; T810 and T960 booms
- Joints
- Z25 and Z30 aluminium folding arm tube joints
- Plates
- Tarot X8 plates, Flywoo FlyLens and Explorer plates
- Landing gear
- T810/T960 foldable landing gear
- Motor mounts
- 16, 25 and 30 mm tube mounts
- Use
- Repair and build multirotors and FPV frames
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1HappyModel Canopy for SNAPPER7 Drone₹259
Option 2TarotX Series Glass Fiber Canopy TL8X008₹3,319
Option 3Tarot 3K Carbon Fiber Tube Φ8mm x 330mm (TL68B12)₹529
Option 4Tarot 680PRO Carbon Fiber Canopy TL2851₹1,839
Option 5Tarot TL68B44 Φ16mm Metal Dual Motor Mount₹1,249
Option 6Tarot Φ30MM Suspension Motor Mount TL30Z2₹2,179
What the Tarot carbon booms, folding arm joints, plates, landing gear and frame parts is
Tarot's big multirotor frames use pure carbon booms with folding aluminium joints. The Z25 and Z30 joints clamp a 25 mm or 30 mm tube and fold the arm along the body. Motor mounts clamp onto the boom end, and dual-motor mounts carry two motors for X8 layouts. Replacement plates and covers keep specific frame models like the X8 and T810 repairable.
Flywoo FlyLens and Explorer plates and brackets repair small FPV frames in the same way. Match the part number to the frame model: plates are cut for one frame only.
Tarot carbon booms, folding arm joints, plates, landing gear and frame parts pinout
The pins on the Tarot carbon booms, folding arm joints, plates, landing gear and frame parts and what each one does.
| Pin | Function |
|---|---|
| Tube diameter | 8, 16, 25 or 30 mm |
| Joint clamp | Screws squeeze the carbon tube |
| Mount pattern | Motor bolt holes, check the motor |
| Frame model | T810, T960, X8, FlyLens, Explorer |
- Tube diameter
- 8, 16, 25 or 30 mm
- Joint clamp
- Screws squeeze the carbon tube
- Mount pattern
- Motor bolt holes, check the motor
- Frame model
- T810, T960, X8, FlyLens, Explorer
Wiring the Tarot carbon booms, folding arm joints, plates, landing gear and frame parts
How the Tarot carbon booms, folding arm joints, plates, landing gear and frame parts fits and connects.
| Tarot carbon booms, folding arm joints, plates, landing gear and frame parts pin | Fits or connects to | Note |
|---|---|---|
| Carbon boom | Z25 or Z30 joint of the same diameter | Do not over-tighten and crush the tube |
| Folding joint | Frame centre plate | Fit the lock in the open position |
| Motor mount | Boom end | Align the motor shaft up |
| Landing gear | Boom or plate | Use the model's own mounting holes |
- Carbon boom
- Fits or connects to:
- Z25 or Z30 joint of the same diameter
- Note:
- Do not over-tighten and crush the tube
- Folding joint
- Fits or connects to:
- Frame centre plate
- Note:
- Fit the lock in the open position
- Motor mount
- Fits or connects to:
- Boom end
- Note:
- Align the motor shaft up
- Landing gear
- Fits or connects to:
- Boom or plate
- Note:
- Use the model's own mounting holes
Example code
A short order of work that suits this family.
1. Identify the frame model and the part number you need.
2. Measure the boom diameter: it must match the joint or mount.
3. Slide the joint onto the tube, align it and tighten the clamp screws evenly.
4. Fit the motor mount and check the motor shaft points straight up.
5. Fold and unfold the arm to check the lock engages firmly.
6. Check all screws with thread lock before flight.Setup and tuning
a 25 mm joint needs a 25 mm tube; use the correct size.
tighten gradually; over-tightening can crack carbon.
plates and covers are model-specific.
use it on motor and joint screws.
What you need
Shop this list20 of 20 found in our store · ₹21,354
HappyModel Canopy for SNAPPER7 Drone: the part this guide coversHappyModel Canopy for SNAPPER7 Drone₹259
TarotX Series Glass Fiber Canopy TL8X008: another version this guide coversTarotX Series Glass Fiber Canopy TL8X008₹3,319
Tarot 3K Carbon Fiber Tube Φ8mm x 330mm (TL68B12): another version this guide coversTarot 3K Carbon Fiber Tube Φ8mm x 330mm (TL68B12)₹529
Tarot 680PRO Carbon Fiber Canopy TL2851: another version this guide coversTarot 680PRO Carbon Fiber Canopy TL2851₹1,839
Tarot TL68B44 Φ16mm Metal Dual Motor Mount: another version this guide coversTarot TL68B44 Φ16mm Metal Dual Motor Mount₹1,249
Tarot Φ30MM Suspension Motor Mount TL30Z2: another version this guide coversTarot Φ30MM Suspension Motor Mount TL30Z2₹2,179
Tarot Z30 Waterproof Folding Arm Mount TL30A1 (Φ30mm): another version this guide coversTarot Z30 Waterproof Folding Arm Mount TL30A1 (Φ30mm)₹2,689
Tarot Z25 Folder Arm Mount TL25A1 for 25mm Tubes: another version this guide coversTarot Z25 Folder Arm Mount TL25A1 for 25mm Tubes₹2,239
Tarot 25MM Dual Motor Mount Black (TL96032): another version this guide coversTarot 25MM Dual Motor Mount Black (TL96032)₹1,559
Flywoo FlyLens 75 Bottom Plate DJI O3 V1.3: another version this guide coversFlywoo FlyLens 75 Bottom Plate DJI O3 V1.3₹709
AxisFlying Cineon C25 Frame Guards (Clear Blue/Green, 2-Pack): another version this guide coversAxisFlying Cineon C25 Frame Guards (Clear Blue/Green, 2-Pack)₹529
AxisFlying CineON C30/C35 Propeller Guards (2-Pack) Clear: another version this guide coversAxisFlying CineON C30/C35 Propeller Guards (2-Pack) Clear₹749
Flywoo FlyLens 85 Propeller Guard: another version this guide coversFlywoo FlyLens 85 Propeller Guard₹337
Flywoo FlyLens 85 Propeller Guard – Clear: another version this guide coversFlywoo FlyLens 85 Propeller Guard₹337
Flywoo FlyLens 75/85 HD VTX Mounting Bracket (Clear): another version this guide coversFlywoo FlyLens 75/85 HD VTX Mounting Bracket₹249
Flywoo FlyLens 85 Bottom Plate for O3Wasp Walksnail HD Zero: another version this guide coversFlywoo FlyLens 85 Bottom Plate for O3Wasp Walksnail HD Zero₹529
Flywoo FlyLens 85 Bottom Plate for O3 Lite & HD Zero: another version this guide coversFlywoo FlyLens 85 Bottom Plate for O3 Lite & HD Zero₹499
Flywoo FlyLens 75/85 Analog Centre Plate: another version this guide coversFlywoo FlyLens 75/85 Analog Centre Plate₹277
Flywoo FlyLens 85 Bottom Plate for DJI O3 Lite: another version this guide coversFlywoo FlyLens 85 Bottom Plate for DJI O3₹639
Flywoo FlyLens 85 Bottom Plate for DJI O3: another version this guide coversFlywoo FlyLens 85 Bottom Plate for DJI O3₹639
Alternatives and when to choose them
- Drone frame arms and parts: general parts.
- Drone hardware, dampers and standoffs: fasteners.
- FPV drone frames: choosing a complete frame.
Common mistakes to avoid
- Ordering a joint for the wrong tube diameter.
- Over-tightening a carbon tube clamp.
- Buying a plate for the wrong frame model.
- Skipping thread lock.
Frequently asked questions
What do Z25 and Z30 mean?
They are folding joints for 25 mm and 30 mm carbon tubes.
Can I use any boom with any joint?
No, the tube diameter must match the joint.
Are plates interchangeable?
No, plates are cut for a specific frame model.
Why use carbon booms?
They are light and stiff, so arms resist flexing.
What is a dual motor mount?
A mount that carries two motors on one arm for X8 layouts.
Parts for this guide
- ₹259View
- ₹3,319View
- ₹529View
- ₹1,839View
- ₹1,249View
- ₹2,179View
- ₹2,689View
- ₹2,239View
- ₹1,559View
- ₹709View
- ₹529View
- ₹749View
- ₹337View
- ₹376View
- ₹259View
- ₹529View
- ₹499View
- ₹277View
- ₹649View
- ₹639View
- ₹337View
- ₹619View
- ₹376View
- ₹496View
- ₹446View
- ₹499View
- ₹1,525View
- ₹479View
- ₹1,049View
- ₹459View
- ₹894View
- ₹257View
- ₹1,451View
- ₹1,600View
- ₹2,595View
- ₹449View
- ₹2,549View
- ₹1,279View
- ₹1,799View
- ₹2,536View
- ₹2,685View
- ₹2,352View
- ₹5,232View
- ₹5,646View
- ₹456View
- ₹705View
- ₹529View
- ₹665View
- ₹1,129View
- ₹1,146View
- ₹919View
- ₹2,237View
- ₹237View
- ₹5,646View
- ₹1,309View
- ₹2,699View
- ₹1,232View
- ₹2,249View
- ₹2,269View
- ₹1,839View
- ₹2,004View
- ₹1,599View
- ₹179View
- ₹2,566View
- ₹138View
- ₹1,504View
- ₹289View
- ₹223View
- ₹239View
- ₹200View
- ₹191View
- ₹1,539View
- ₹974View
- ₹100View
- ₹549View
- ₹299View
Projects that use it
Put this into practice: 1 step-by-step build in our project library uses parts from this guide.
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.



























































