Component guide · Intermediate · 6 min read
Waveshare ESP32-S3 Small Display Boards

0.85 to 2.16 Inch LCD, Round, Double Eye, AMOLED, Knob, Watch, GEEK and 8x8 RGB Matrix Boards
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
These Waveshare boards put an ESP32-S3 and a small colour screen on one PCB, ready for gadgets, dashboards, smart knobs and wearables. Choose a bar LCD (1.47 to 1.9 inch), a round screen (1.28 to 2.1 inch), a bright AMOLED, a knob with a rotary encoder, or the 2.06 inch watch board. Many add an IMU, RTC, battery charger, microphone or speaker.
Key specs at a glance
- Chip
- ESP32-S3 (dual-core 240 MHz, Wi-Fi, BLE 5), often with 8 MB PSRAM
- Screens
- 0.85 to 2.16 inch LCD or AMOLED, some touch
- Drivers
- ST7789, GC9A01, ST77916, SH8601, CO5300
- Extras
- QMI8658 IMU, PCF85063 RTC, mics, speaker, SD
- Power
- USB-C, LiPo charging on most
- Software
- Arduino, ESP-IDF, LVGL, MicroPython
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Waveshare ESP32-S3 1.47-Inch LCD Display Development Board₹1,399
Option 2Waveshare ESP32-S3 1.47-Inch 172×320 LCD Display Development Board Type B₹1,699
Option 3Waveshare ESP32-S3 1.9-Inch LCD Display Development Board₹2,099
Option 4Waveshare ESP32-S3 1.54-Inch IPS LCD Display Board w/ IMU₹1,789
Option 5Waveshare ESP32-S3 1.54-Inch IPS LCD Touch Display Dev Board₹2,239
Option 6Waveshare ESP32-S3 1.69-Inch Display Development Board w/ IMU & RTC₹1,989
What the Waveshare ESP32-S3 small, round, AMOLED and knob display boards is
Waveshare ESP32-S3 small display boards, such as the 1.28-inch round and 1.47-inch LCD boards, pair an ESP32-S3 with a small screen and often an IMU or battery charger.
AMOLED boards use QSPI screens that need the maker's driver or Arduino_GFX; plain SPI LCD boards work with TFT_eSPI too. The knob boards combine a round touch screen with a rotary encoder for smart home controls.
The GEEK board has a USB-A plug and screen for USB tools, and the 8x8 RGB matrix board drives WS2812 LEDs with an IMU for games.
Waveshare ESP32-S3 small, round, AMOLED and knob display boards pinout
The pins on the Waveshare ESP32-S3 small, round, AMOLED and knob display boards and what each one does.
| Pin | Function |
|---|---|
| USB-C | Power, flashing and serial (native USB on S3/C6/RP2350) |
| Display interface | SPI, QSPI, RGB parallel or MIPI to the built-in screen |
| Touch (I2C) | Capacitive touch controller on touch versions |
| Extras | IMU, RTC, microSD, battery charger, mic or speaker depending on board |
| Expansion header | Free GPIO, I2C and UART pads |
- USB-C
- Power, flashing and serial (native USB on S3/C6/RP2350)
- Display interface
- SPI, QSPI, RGB parallel or MIPI to the built-in screen
- Touch (I2C)
- Capacitive touch controller on touch versions
- Extras
- IMU, RTC, microSD, battery charger, mic or speaker depending on board
- Expansion header
- Free GPIO, I2C and UART pads
Wiring the Waveshare ESP32-S3 small, round, AMOLED and knob display boards
These boards are ready to use: the screen, touch and extras are already wired. Check the maker's wiki for the exact pins used by the display before connecting anything else to the header.
| Waveshare ESP32-S3 small, round, AMOLED and knob display boards pin | Connection | Note |
|---|---|---|
| USB-C | To a PC to flash | Hold BOOT if not detected |
| Battery | JST LiPo connector where fitted | 3.7V single cell only |
| Sensors | I2C pads or header | 3.3V logic |
- USB-C
- Connection:
- To a PC to flash
- Note:
- Hold BOOT if not detected
- Battery
- Connection:
- JST LiPo connector where fitted
- Note:
- 3.7V single cell only
- Sensors
- Connection:
- I2C pads or header
- Note:
- 3.3V logic
Example code
Waveshare publishes ready examples (Arduino, ESP-IDF and LVGL) for each board; start from them and change the UI. Enable 'USB CDC On Boot' in the Arduino IDE for serial output on native-USB boards.
#include <Arduino_GFX_Library.h>
// Example pins for an ST7789 SPI screen: copy the real ones from the board wiki
Arduino_DataBus *bus = new Arduino_ESP32SPI(8 /*DC*/, 9 /*CS*/, 10 /*SCK*/, 11 /*MOSI*/);
Arduino_GFX *gfx = new Arduino_ST7789(bus, 12 /*RST*/, 0 /*rotation*/, true /*IPS*/, 172, 320);
void setup() {
pinMode(13, OUTPUT); digitalWrite(13, HIGH); // backlight pin
gfx->begin();
gfx->fillScreen(BLACK);
gfx->setTextColor(CYAN);
gfx->setTextSize(3);
gfx->setCursor(10, 40);
gfx->println("Hello!");
}
void loop() {}Setup and tuning
use ESP32 Arduino core and select ESP32S3 Dev Module with PSRAM if fitted.
use Waveshare's examples or LVGL with the correct driver.
connect a 3.7 V LiPo to the battery header if present.
some boards include a QMI8658 IMU on I2C.
enable USB CDC on boot for Serial over USB.
What you need
Shop this list20 of 20 found in our store · ₹61,610
Waveshare ESP32-S3 1.47-Inch LCD Display Development Board: the part this guide coversWaveshare ESP32-S3 1.47-Inch LCD Display Development Board₹1,399
Waveshare ESP32-S3 1.47-Inch 172×320 LCD Display Development Board Type B: another version this guide coversWaveshare ESP32-S3 1.47-Inch 172×320 LCD Display Development Board Type B₹1,699
Waveshare ESP32-S3 1.9-Inch LCD Display Development Board: another version this guide coversWaveshare ESP32-S3 1.9-Inch LCD Display Development Board₹2,099
Waveshare ESP32-S3 1.54-Inch IPS LCD Display Board w/ IMU: another version this guide coversWaveshare ESP32-S3 1.54-Inch IPS LCD Display Board w/ IMU₹1,789
Waveshare ESP32-S3 1.54-Inch IPS LCD Touch Display Dev Board: another version this guide coversWaveshare ESP32-S3 1.54-Inch IPS LCD Touch Display Dev Board₹2,239
Waveshare ESP32-S3 1.69-Inch Display Development Board w/ IMU & RTC: another version this guide coversWaveshare ESP32-S3 1.69-Inch Display Development Board w/ IMU & RTC₹1,989
Waveshare ESP32-S3 1.46-Inch Round Touch Display Development Board: another version this guide coversWaveshare ESP32-S3 1.46-Inch Round Touch Display Development Board₹2,769
Waveshare ESP32-S3-Touch-LCD-1.46 – 1.46″ Round IPS Touch Display, WiFi & BLE 5: another version this guide coversWaveshare ESP32-S3-Touch-LCD-1.46 – 1.46″ Round IPS Touch Display, WiFi & BLE 5₹3,239
Waveshare ESP32-S3 1.46-Inch Round Display Dev Board w/ IMU, Speaker & Mic: another version this guide coversWaveshare ESP32-S3 1.46-Inch Round Display Dev Board w/ IMU, Speaker & Mic₹2,939
Waveshare ESP32-S3 1.85-Inch Round Display Dev Board w/ Touch: another version this guide coversWaveshare ESP32-S3 1.85-Inch Round Display Dev Board w/ Touch₹4,619
Waveshare ESP32-S3 1.85-Inch Round Display Development Board: another version this guide coversWaveshare ESP32-S3 1.85-Inch Round Display Development Board₹3,359
Waveshare ESP32-S3 1.85-Inch Round LCD Development Board: another version this guide coversWaveshare ESP32-S3 1.85-Inch Round LCD Development Board₹3,849
Waveshare ESP32-S3 2.1-Inch Capacitive Touch Round Display Development Board: another version this guide coversWaveshare ESP32-S3 2.1-Inch Capacitive Touch Round Display Development Board₹4,539
Waveshare ESP32-S3 1.28-Inch Double Eye Round LCD AIoT Dev Board w/ Touch: another version this guide coversWaveshare ESP32-S3 1.28-Inch Double Eye Round LCD AIoT Dev Board w/ Touch₹4,089
Waveshare ESP32-S3 1.28-Inch Dual IPS LCD AIoT Development Board: another version this guide coversWaveshare ESP32-S3 1.28-Inch Dual IPS LCD AIoT Development Board₹2,519
Waveshare ESP32-S3 1.43-Inch AMOLED Display Dev Board w/ IMU: another version this guide coversWaveshare ESP32-S3 1.43-Inch AMOLED Display Dev Board w/ IMU₹3,569
Waveshare ESP32-S3 1.43-Inch AMOLED Display Dev Board w/ IMU & CNC Case: another version this guide coversWaveshare ESP32-S3 1.43-Inch AMOLED Display Dev Board w/ IMU₹3,569
Waveshare ESP32-S3 1.64-Inch AMOLED Touch Display Development Board: another version this guide coversWaveshare ESP32-S3 1.64-Inch AMOLED Touch Display Development Board₹3,149
Waveshare ESP32-S3 1.75-Inch AMOLED Round Touch Display Dev Board: another version this guide coversWaveshare ESP32-S3 1.75-Inch AMOLED Round Touch Display Dev Board₹4,199
Waveshare ESP32-S3 1.91-Inch AMOLED Display Development Board w/ IMU: another version this guide coversWaveshare ESP32-S3 1.91-Inch AMOLED Display Development Board w/ IMU₹3,989
Alternatives and when to choose them
- Larger ESP32-S3 touch boards: 2.8 to 7 inch.
- ESP32-C6 display boards: Wi-Fi 6, lower cost.
- GC9A01 round display: separate round screen.
Common mistakes to avoid
- Wrong PSRAM setting.
- USB CDC off.
- Wrong display driver.
- Reversed battery polarity.
Frequently asked questions
Which board should I select in Arduino IDE?
ESP32S3 Dev Module, with PSRAM and flash size set to match.
Why does Serial print nothing?
Enable USB CDC on boot in the board settings.
Can I make a smartwatch with it?
Yes, the round displays with IMU suit watch projects.
Why is the display blank?
Check backlight pin and driver settings from the wiki.
Can it run on battery?
Yes, with a LiPo on boards that have a charger.
Parts for this guide
- ₹1,399View
- ₹1,699View
- ₹2,099View
- ₹1,789View
- ₹2,239View
- ₹1,989View
- ₹2,769View
- ₹3,239View
- ₹2,939View
- ₹4,619View
- ₹3,359View
- ₹3,849View
- ₹4,539View
- ₹4,089View
- ₹2,519View
- ₹3,569View
- ₹3,779View
- ₹3,149View
- ₹4,199View
- ₹3,989View
- ₹3,729View
- ₹3,900View
- ₹6,299View
- ₹6,609View
- ₹1,789View
- ₹1,449View
- ₹1,189View
- ₹2,799View
- ₹1,499View
- ₹629View
- ₹129View
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.












