Component guide · Beginner · 5 min read
Waveshare RP2040 and RP2350 Display Boards

0.96 to 7 Inch LCD, Round, AMOLED and Touch Boards, RP2350-GEEK and RP2350B Boards
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
These boards combine a Raspberry Pi RP2040 or RP2350 microcontroller with a built-in screen. They are programmed like a Pico in MicroPython, C/C++ or Arduino, and suit dashboards, clocks, games, wearables and teaching. RP2350 boards are faster and have more memory; RP2350B versions have extra GPIO and drive larger 4 to 7 inch screens. Many include an IMU, RTC and battery charging.
Key specs at a glance
- Chip
- RP2040 (dual Cortex-M0+) or RP2350 (dual Cortex-M33 / RISC-V, 150 MHz)
- Screens
- 0.96 to 7 inch LCD or AMOLED, round options
- Touch
- Capacitive on touch versions
- Extras
- QMI8658 IMU, PCF85063 RTC, SD card, camera port (3.5 inch OV5640 version)
- Wireless
- None (add an ESP module if needed)
- Software
- MicroPython, Pico SDK, Arduino-Pico, LVGL
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Waveshare RP2040 Board with 1.28 inch Round LCD and 6-Axis IMU₹2,100
Option 2Waveshare RP2040 Dev Board w/ 1.69-Inch Touch LCD & IMU₹2,239
Option 3Waveshare RP2350-LCD-0.96 Dev Board w/ 0.96-Inch IPS LCD₹1,069
Option 4Waveshare RP2350-GEEK Development Board w/ 1.14-Inch IPS LCD₹1,229
Option 5Waveshare RP2350 1.47-Inch Display Development Board₹1,109
Option 6Waveshare RP2350 Dev Board w/ 1.69-Inch Touch LCD, Accelerometer & Gyroscope₹2,289
What the Waveshare RP2040 and RP2350 display boards is
Waveshare RP2040 and RP2350 display boards combine the Raspberry Pi microcontroller with small LCDs or round screens, for gadgets, gauges and wearables.
There is no Wi-Fi on these boards; they are for stand-alone displays or projects that connect over USB, UART or I2C. Drag the MicroPython UF2 file onto the board in BOOTSEL mode, then copy the maker's display driver file.
The RP2350-GEEK has a USB-A plug and screen and works as a debug probe or USB gadget.
Waveshare RP2040 and RP2350 display boards pinout
The pins on the Waveshare RP2040 and RP2350 display boards and what each one does.
| Pin | Function |
|---|---|
| USB-C | Power, flashing and serial (native USB on S3/C6/RP2350) |
| Display interface | SPI, QSPI, RGB parallel or MIPI to the built-in screen |
| Touch (I2C) | Capacitive touch controller on touch versions |
| Extras | IMU, RTC, microSD, battery charger, mic or speaker depending on board |
| Expansion header | Free GPIO, I2C and UART pads |
- USB-C
- Power, flashing and serial (native USB on S3/C6/RP2350)
- Display interface
- SPI, QSPI, RGB parallel or MIPI to the built-in screen
- Touch (I2C)
- Capacitive touch controller on touch versions
- Extras
- IMU, RTC, microSD, battery charger, mic or speaker depending on board
- Expansion header
- Free GPIO, I2C and UART pads
Wiring the Waveshare RP2040 and RP2350 display boards
These boards are ready to use: the screen, touch and extras are already wired. Check the maker's wiki for the exact pins used by the display before connecting anything else to the header. Hold BOOTSEL while plugging in to flash a UF2 file.
| Waveshare RP2040 and RP2350 display boards pin | Connection | Note |
|---|---|---|
| USB-C | To a PC to flash | Hold BOOT if not detected |
| Battery | JST LiPo connector where fitted | 3.7V single cell only |
| Sensors | I2C pads or header | 3.3V logic |
- USB-C
- Connection:
- To a PC to flash
- Note:
- Hold BOOT if not detected
- Battery
- Connection:
- JST LiPo connector where fitted
- Note:
- 3.7V single cell only
- Sensors
- Connection:
- I2C pads or header
- Note:
- 3.3V logic
Example code
Driver file names differ per board; they are in the Waveshare demo zip. C/C++ and LVGL examples come in the same package.
# Copy the board's LCD driver file (for example LCD_1inch28.py) to the board first
from LCD_1inch28 import LCD_1inch28
import time
lcd = LCD_1inch28()
lcd.set_bl_pwm(65535) # backlight full
lcd.fill(lcd.black)
lcd.text("Hello RP2350", 70, 110, lcd.white)
lcd.rect(60, 100, 120, 30, lcd.red)
lcd.show()Setup and tuning
hold BOOT, plug in USB and drag a UF2, or use the Arduino IDE (Earle Philhower core) or MicroPython.
use the Waveshare demo or LVGL with the right driver.
check which pins the display, IMU and battery use.
some boards have a LiPo charger.
GPIO is 3.3 V.
What you need
Shop this list20 of 20 found in our store · ₹56,581
Waveshare RP2040 Board with 1.28 inch Round LCD and 6-Axis IMU: the part this guide coversWaveshare RP2040 Board with 1.28 inch Round LCD and 6-Axis IMU₹2,100
Waveshare RP2040 Dev Board w/ 1.69-Inch Touch LCD & IMU: another version this guide coversWaveshare RP2040 Dev Board w/ 1.69-Inch Touch LCD & IMU₹2,239
Waveshare RP2350-LCD-0.96 Dev Board w/ 0.96-Inch IPS LCD: another version this guide coversWaveshare RP2350-LCD-0.96 Dev Board w/ 0.96-Inch IPS LCD₹1,069
Waveshare RP2350-GEEK Development Board w/ 1.14-Inch IPS LCD: another version this guide coversWaveshare RP2350-GEEK Development Board w/ 1.14-Inch IPS LCD₹1,229
Waveshare RP2350 1.47-Inch Display Development Board: another version this guide coversWaveshare RP2350 1.47-Inch Display Development Board₹1,109
Waveshare RP2350 Dev Board w/ 1.69-Inch Touch LCD, Accelerometer & Gyroscope: another version this guide coversWaveshare RP2350 Dev Board w/ 1.69-Inch Touch LCD, Accelerometer & Gyroscope₹2,289
Waveshare RP2350 2-Inch Capacitive Touch Display Development Board: another version this guide coversWaveshare RP2350 2-Inch Capacitive Touch Display Development Board₹1,889
Waveshare RP2350 1.43-Inch AMOLED Display Development Board w/ IMU & RTC: another version this guide coversWaveshare RP2350 1.43-Inch AMOLED Display Development Board w/ IMU & RTC₹2,829
Waveshare RP2350 1.46-Inch IPS Touch Round Display Dev Board: another version this guide coversWaveshare RP2350 1.46-Inch IPS Touch Round Display Dev Board₹2,619
Waveshare RP2350 1.64-Inch AMOLED Display Dev Board w/ Accelerometer & Gyroscope: another version this guide coversWaveshare RP2350 1.64-Inch AMOLED Display Dev Board w/ Accelerometer & Gyroscope₹2,829
Waveshare RP2350 1.75-Inch AMOLED Display Dev Board w/ IMU Sensor: another version this guide coversWaveshare RP2350 1.75-Inch AMOLED Display Dev Board w/ IMU Sensor₹3,559
Waveshare RP2350 1.8-Inch AMOLED Touch Display Dev Board w/ IMU: another version this guide coversWaveshare RP2350 1.8-Inch AMOLED Touch Display Dev Board w/ IMU₹3,129
Waveshare RP2350 2.1-Inch Round IPS Capacitive Touch Display Dev Board: another version this guide coversWaveshare RP2350 2.1-Inch Round IPS Capacitive Touch Display Dev Board₹3,569
Waveshare RP2350B 2.1-Inch IPS Capacitive Touch Round Display Dev Board: another version this guide coversWaveshare RP2350B 2.1-Inch IPS Capacitive Touch Round Display Dev Board₹3,339
Waveshare RP2350 2.41-Inch AMOLED Touch Display Development Board: another version this guide coversWaveshare RP2350 2.41-Inch AMOLED Touch Display Development Board₹5,699
Waveshare RP2350 2.8-Inch Capacitive Touch Display Development Board: another version this guide coversWaveshare RP2350 2.8-Inch Capacitive Touch Display Development Board₹2,809
Waveshare RP2350B 2.8-Inch Round Display Development Board: another version this guide coversWaveshare RP2350B 2.8-Inch Round Display Development Board₹4,409
Waveshare RP2350 Development Board w/ 3.49-Inch IPS Capacitive Touch Display: another version this guide coversWaveshare RP2350 Development Board w/ 3.49-Inch IPS Capacitive Touch Display₹3,139
Waveshare RP2350 3.5-Inch LCD Display Development Board w/ Dual-Core: another version this guide coversWaveshare RP2350 3.5-Inch LCD Display Development Board w/ Dual-Core₹2,979
Waveshare RP2350 3.5-Inch LCD Display Development Board w/ OV5640 Camera Interface: another version this guide coversWaveshare RP2350 3.5-Inch LCD Display Development Board w/ OV5640 Camera Interface₹3,749
Alternatives and when to choose them
- RP2040 boards: without screens.
- Small ESP32-S3 display boards: with Wi-Fi.
- Pico add-on boards: Pico expansions.
Common mistakes to avoid
- 5 V logic.
- Wrong display driver.
- Charge-only cable.
- Pin conflicts.
Frequently asked questions
How do I program a Waveshare RP2040 display board?
Hold BOOT, connect USB and copy a UF2 file, or upload from Arduino IDE.
Can I use MicroPython with the display?
Yes. Waveshare provides MicroPython examples for the display and sensors.
Why is the display blank?
The display driver is wrong or the backlight pin is not switched on.
Can it run LVGL?
Yes. LVGL runs well on both the RP2040 and the faster RP2350.
Are the pins 5 V tolerant?
No. The pins are 3.3 V only, so use level shifting for 5 V parts.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.







