Shop by category
Shop all components
Gas, Air Quality & CO2 Sensors · Adafruit
The Adafruit BME688 is a high-precision environmental sensor module integrating temperature, humidity, barometric pressure, and VOC gas sensing. It features I2C and SPI interfaces for easy integration with Arduino, Raspberry Pi, ESP32, and other 3.3V/5V microcontrollers via its solderless Stemma QT/Qwiic connector.
📖Guide for this partBME688 AI Gas Sensor→Buy 10 or more to pay ₹2,877.55 each
Business and institution accounts get extra tier pricing. Sign in for 100+ pieces.
Ships in 2-4 weeks
We source this item for your order. It is dispatched within 2 to 4 weeks; if we cannot get it, we cancel it and refund you in full. Prepaid only.
Overview
The BME688, based on the Bosch Sensortec chip, is a MEMS-based environmental sensor providing calibrated digital outputs for temperature, relative humidity, barometric pressure, and volatile organic compound (VOC) detection. Its integrated metal oxide (MOX) gas sensor features a programmable micro-hotplate heater, enabling controlled sensitivity tuning for detecting gases like ethanol, alcohols, and carbon monoxide.
Designed for robust environmental monitoring, the sensor offers high stability and precision across a wide operating range. The Adafruit breakout board includes level shifting and a 3.3V regulator, ensuring safe operation with both 3.3V and 5V microcontroller systems. Its compact form factor with standard 0.1″ pitch headers and Stemma QT connector facilitates rapid prototyping and solder-free connections in IoT, weather station, and indoor air quality applications.
Good for
Category
Gas, Air Quality & CO2 SensorsSKU
GB-SENS-3406
| Brand / part no. | Adafruit |
|---|---|
| Category | Gas, Air Quality & CO2 Sensors |
| Connector | Stemma QT (Qwiic compatible) |
| Sensor Type | Temperature, Humidity, Pressure & Gas (VOC) |
| Header Pitch | 0.1" (2.54mm) |
| Logic Voltage | 3.3V / 5V compatible |
| Gas Sensor Type | Metal Oxide (MOX) |
| Detectable Gases | VOCs (e.g., Ethanol, Alcohols, Carbon Monoxide) |
| Altitude Accuracy | ±1 meter (typical) |
| Operating Voltage | 3.3V to 5V DC (via onboard regulator) |
| Communication Interface | I2C, SPI |
| Manufacturer Part Number | BME688 |
| Humidity Range / Accuracy | 0-100% RH / ±3% |
| Pressure Range / Accuracy | 300-1100 hPa / ±1 hPa |
| Temperature Range / Accuracy | -40°C to +85°C / ±1.0°C |
Typical values from the manufacturer's datasheet. Confirm the exact variant before you build a product around it.
| VCC | Power, 3.3–5 V (module) |
|---|---|
| GND | Ground |
| SCL | I²C clock / SPI SCK |
| SDA | I²C data / SPI MOSI |
| SDO | SPI MISO, or I²C address select (GND 0x76, VCC 0x77) |
| CS | SPI chip select. Leave high for I²C |
Typical pin names. Boards from different makers can differ, so check the print on your module.
Library: Adafruit BME680 library (Arduino) or Bosch BSEC2 for IAQ
#include <Adafruit_BME680.h>
Adafruit_BME680 bme; // I²C, address 0x77
void setup() {
Serial.begin(115200);
if (!bme.begin()) { Serial.println("BME680 not found"); while (1); }
bme.setGasHeater(320, 150); // 320 °C for 150 ms
}
void loop() {
if (bme.performReading()) {
Serial.printf("%.1f °C %.0f %%RH %.0f hPa gas %lu Ω\n",
bme.temperature, bme.humidity, bme.pressure / 100.0, bme.gas_resistance);
}
delay(2000);
}Step-by-step builds that use parts from Gas, Air Quality & CO2 Sensors.
Category: Gas, Air Quality & CO2 Sensors; Connector: Stemma QT (Qwiic compatible); Sensor Type: Temperature, Humidity, Pressure & Gas (VOC); Header Pitch: 0.1" (2.54mm); Logic Voltage: 3.3V / 5V compatible; Gas Sensor Type: Metal Oxide (MOX). The full list is under Specifications.
VCC: Power, 3.3–5 V (module); GND: Ground; SCL: I²C clock / SPI SCK; SDA: I²C data / SPI MOSI; SDO: SPI MISO, or I²C address select (GND 0x76, VCC 0x77); CS: SPI chip select. Leave high for I²C. These are the typical pin names shown under Pinout & wiring. Boards from different makers can differ, so check the print on your module.
Adafruit BME680 library (Arduino) or Bosch BSEC2 for IAQ. You can copy the example code from this page.
Yes. Prices include GST and every order comes with a GST invoice. Add your GSTIN at checkout and we put it on the invoice for input credit.
Delivery is a flat ₹80 anywhere in India, and free on orders over ₹999. We ship from our Bengaluru and Guwahati warehouses, whichever is nearer to you, and the product page shows an estimated delivery date for your PIN code.
Yes, on eligible PIN codes for orders up to ₹5,000. A ₹150 COD charge is added at checkout, and checkout shows whether COD is available for your order. You can also pay by UPI, card or net banking.
Yes, if it arrives damaged, defective or is not what you ordered: tell us within 7 days of delivery and we collect it free and send a replacement or a full refund. We do not take back parts that are not faulty, so check the specs or ask us before you order. You can cancel for free until the order is dispatched.
Yes. The price per unit drops automatically at higher quantities, as shown in the price tiers above. For 100+ pieces or a purchase order, ask for a bulk quote.
Check the specifications for voltage and interface, or ask Geeko AI. It can suggest compatible boards and wiring.
Guides for this part and its category.

₹1,499.00
Incl. GST
₹779.00
Incl. GST
₹2,804.00
Incl. GST
₹829.00
Incl. GSTNo reviews yet. Bought or built with this? Be the first to review it.