Shop by category
Shop all components
Gas, Air Quality & CO2 Sensors · Bosch
The Bosch BME680 is a compact 4-in-1 environmental sensor module integrating MEMS-based sensing for temperature, humidity, barometric pressure, and volatile organic compound (VOC) gas detection. It features selectable I²C and SPI digital interfaces for seamless integration with microcontrollers like Arduino, Raspberry Pi, ESP32, and STM32, providing direct IAQ (Indoor Air Quality) index output.
📖Guide for this partBME680 Environmental Sensor→Buy 10 or more to pay ₹1,034.55 each
Business and institution accounts get extra tier pricing. Sign in for 100+ pieces.
Parts you need to use it, or that are built with it in our projects.




Overview
The Bosch BME680 is a highly integrated environmental sensor combining four distinct sensing elements into a single MEMS package. It utilizes a metal-oxide (MOX) gas sensor for detecting a broad range of volatile organic compounds (VOCs), a piezoresistive pressure sensor, and capacitive sensing elements for humidity and temperature. This multi-sensor fusion enables comprehensive environmental monitoring from a single, compact device.
Designed for low-power mobile and wearable applications, the BME680 features advanced signal conditioning and digital compensation algorithms onboard. It outputs calibrated digital data via I²C or SPI, simplifying integration into IoT nodes, smart home devices, and portable instrumentation. Its fast response time and high accuracy make it suitable for dynamic environmental monitoring applications.
Good for
Category
Gas, Air Quality & CO2 SensorsSKU
GB-SENS-3492
| Brand / part no. | Bosch |
|---|---|
| Category | Gas, Air Quality & CO2 Sensors |
| Sensor Type | 4-in-1 Environmental (Gas, Pressure, Humidity, Temperature) |
| Package Type | 8-pin LGA |
| Humidity Range | 0% to 100% RH |
| Pressure Range | 300 hPa to 1100 hPa |
| Supply Voltage | 1.7 V to 3.6 V |
| Pressure Accuracy | ±0.12 hPa (typical) |
| Temperature Range | -40°C to +85°C |
| Gas Sensing Principle | Metal-Oxide (MOX) |
| Operating Temperature | -40°C to +85°C |
| Communication Interface | I²C, SPI |
| Manufacturer Part Number | BME680 |
| Average Current Consumption | < 0.1 mA (low power mode) |
| Package Dimensions (L x W x H) | 3.0 mm x 3.0 mm x 0.93 mm |
Typical values from the manufacturer's datasheet. Confirm the exact variant before you build a product around it.
| VCC | Power, 3.3–5 V (module) |
|---|---|
| GND | Ground |
| SCL | I²C clock / SPI SCK |
| SDA | I²C data / SPI MOSI |
| SDO | SPI MISO, or I²C address select (GND 0x76, VCC 0x77) |
| CS | SPI chip select. Leave high for I²C |
Typical pin names. Boards from different makers can differ, so check the print on your module.
Library: Adafruit BME680 library (Arduino) or Bosch BSEC2 for IAQ
#include <Adafruit_BME680.h>
Adafruit_BME680 bme; // I²C, address 0x77
void setup() {
Serial.begin(115200);
if (!bme.begin()) { Serial.println("BME680 not found"); while (1); }
bme.setGasHeater(320, 150); // 320 °C for 150 ms
}
void loop() {
if (bme.performReading()) {
Serial.printf("%.1f °C %.0f %%RH %.0f hPa gas %lu Ω\n",
bme.temperature, bme.humidity, bme.pressure / 100.0, bme.gas_resistance);
}
delay(2000);
}Used in 3 of our project guides, with wiring and code.
Category: Gas, Air Quality & CO2 Sensors; Sensor Type: 4-in-1 Environmental (Gas, Pressure, Humidity, Temperature); Package Type: 8-pin LGA; Humidity Range: 0% to 100% RH; Pressure Range: 300 hPa to 1100 hPa; Supply Voltage: 1.7 V to 3.6 V. The full list is under Specifications.
VCC: Power, 3.3–5 V (module); GND: Ground; SCL: I²C clock / SPI SCK; SDA: I²C data / SPI MOSI; SDO: SPI MISO, or I²C address select (GND 0x76, VCC 0x77); CS: SPI chip select. Leave high for I²C. These are the typical pin names shown under Pinout & wiring. Boards from different makers can differ, so check the print on your module.
Adafruit BME680 library (Arduino) or Bosch BSEC2 for IAQ. You can copy the example code from this page.
Geekobot projects that use it: Indoor air-quality monitor, Wi-Fi air-quality monitor and Wi-Fi indoor air-quality station (BME680). Each project has the parts list, wiring and code.
Yes. Prices include GST and every order comes with a GST invoice. Add your GSTIN at checkout and we put it on the invoice for input credit.
Delivery is a flat ₹80 anywhere in India, and free on orders over ₹999. We ship from our Bengaluru and Guwahati warehouses, whichever is nearer to you, and the product page shows an estimated delivery date for your PIN code.
Yes, on eligible PIN codes for orders up to ₹5,000. A ₹150 COD charge is added at checkout, and checkout shows whether COD is available for your order. You can also pay by UPI, card or net banking.
Yes, if it arrives damaged, defective or is not what you ordered: tell us within 7 days of delivery and we collect it free and send a replacement or a full refund. We do not take back parts that are not faulty, so check the specs or ask us before you order. You can cancel for free until the order is dispatched.
Yes. The price per unit drops automatically at higher quantities, as shown in the price tiers above. For 100+ pieces or a purchase order, ask for a bulk quote.
Check the specifications for voltage and interface, or ask Geeko AI. It can suggest compatible boards and wiring.
Guides for this part and its category.

₹1,499.00
Incl. GST
₹779.00
Incl. GST
₹3,029.00
Incl. GST
₹2,804.00
Incl. GSTNo reviews yet. Bought or built with this? Be the first to review it.