Shop by category
Shop all components
Tilt, Inclinometer & Vibration Sensors · Generic
This SW-18015P-based vibration sensor module provides a digital trigger output for detecting shocks and motion in Arduino, Raspberry Pi, and other microcontroller projects. Operating from 3.3V to 5V DC, it integrates an LM393 comparator for clean signal conditioning.
📖Guide for this partSW-420 vibration sensor→Buy 10 or more to pay ₹48.45 each
Business and institution accounts get extra tier pricing. Sign in for 100+ pieces.
Ships in 2-4 weeks
We source this item for your order. It is dispatched within 2 to 4 weeks; if we cannot get it, we cancel it and refund you in full. Prepaid only.
Overview
This vibration sensor module utilizes a spring-based, normally-open (NO) SW-18015P switch that momentarily closes upon detecting physical shock or motion. The integrated LM393 comparator converts this mechanical event into a clean, debounced digital logic signal, providing a stable LOW pulse output suitable for direct connection to microcontroller GPIO or interrupt pins.
Designed for prototyping and embedded systems, the module operates across a standard 3.3V to 5V DC range, making it compatible with Arduino, ESP32, STM32, and Raspberry Pi platforms. Its output can drive small loads directly or interface with relay modules for alarm systems, triggering events based on physical vibration or impact.
Good for
Category
Tilt, Inclinometer & Vibration SensorsSKU
GB-SENS-4359
| Brand / part no. | Generic |
|---|---|
| Category | Tilt, Inclinometer & Vibration Sensors |
| Mounting | Single Fixing Hole |
| Switch Type | Spring-based Vibration Switch (SW-18015P) |
| Key Component | LM393 Comparator |
| Output Signal | Digital (DO), Normally Open (NO) |
| Model / Sensor | Vibration Sensor Module (SW-18015P) |
| Operating Voltage | 3.3 VDC to 5 VDC |
| PCB Dimensions (L x W) | 32 mm x 14 mm |
| Output Drive Capability | >15 mA |
Typical values from the manufacturer's datasheet. Confirm the exact variant before you build a product around it.
| VCC | Power |
|---|---|
| GND | Ground |
| DO | Digital out on vibration |
Typical pin names. Boards from different makers can differ, so check the print on your module.
Step-by-step builds that use parts from Tilt, Inclinometer & Vibration Sensors.
Category: Tilt, Inclinometer & Vibration Sensors; Mounting: Single Fixing Hole; Switch Type: Spring-based Vibration Switch (SW-18015P); Key Component: LM393 Comparator; Output Signal: Digital (DO), Normally Open (NO); Model / Sensor: Vibration Sensor Module (SW-18015P). The full list is under Specifications.
VCC: Power; GND: Ground; DO: Digital out on vibration. These are the typical pin names shown under Pinout & wiring. Boards from different makers can differ, so check the print on your module.
Yes. Prices include GST and every order comes with a GST invoice. Add your GSTIN at checkout and we put it on the invoice for input credit.
Delivery is a flat ₹80 anywhere in India, and free on orders over ₹999. We ship from our Bengaluru and Guwahati warehouses, whichever is nearer to you, and the product page shows an estimated delivery date for your PIN code.
Yes, on eligible PIN codes for orders up to ₹5,000. A ₹150 COD charge is added at checkout, and checkout shows whether COD is available for your order. You can also pay by UPI, card or net banking.
Yes, if it arrives damaged, defective or is not what you ordered: tell us within 7 days of delivery and we collect it free and send a replacement or a full refund. We do not take back parts that are not faulty, so check the specs or ask us before you order. You can cancel for free until the order is dispatched.
Yes. The price per unit drops automatically at higher quantities, as shown in the price tiers above. For 100+ pieces or a purchase order, ask for a bulk quote.
Check the specifications for voltage and interface, or ask Geeko AI. It can suggest compatible boards and wiring.
Guides for this part and its category.

₹170.00
Incl. GST
₹24.00
Incl. GST
₹589.00
Incl. GST
₹499.00
Incl. GSTNo reviews yet. Bought or built with this? Be the first to review it.