Shop by category
Shop all components
Tilt, Inclinometer & Vibration Sensors · Generic
The SW-18015P Vibration Switch Sensor Module is a simple, omnidirectional trigger device designed for Arduino and other 3.3V/5V microcontroller platforms. It provides a digital signal output upon detecting vibration, shock, or tilt, making it ideal for basic motion detection and alarm projects.
📖Guide for this partSW-420 vibration sensor→Buy 10 or more to pay ₹22.80 each
Business and institution accounts get extra tier pricing. Sign in for 100+ pieces.
Overview
This module integrates the SW-18015P vibration switch, a normally-open electromechanical component. At rest, the internal conductive pins are separated, presenting an open (OFF) circuit. When subjected to sufficient vibration, shock, or centrifugal force, the pins momentarily connect, closing the circuit and generating a digital ON signal. The switch returns to its open state once the external force ceases.
The module includes a pull-up resistor and a signal conditioning circuit, providing a stable digital logic output directly compatible with microcontroller GPIO pins. Its sensitivity is inherent to the mechanical design of the SW-18015P component, making it a reliable, non-directional trigger for basic impact, motion, or tilt detection in DIY electronics and prototyping applications.
Good for
Category
Tilt, Inclinometer & Vibration SensorsSKU
GB-SENS-4361
| Brand / part no. | Generic |
|---|---|
| Category | Tilt, Inclinometer & Vibration Sensors |
| Mounting | Via PCB Holes |
| Interface | 3-Pin Header (GND, VCC, SIG) |
| Output Signal | Digital (Active LOW) |
| Model / Component | SW-18015P Vibration Switch Module |
| Operating Voltage | 3.3V - 12V DC |
| Trigger Principle | Mechanical Vibration/Shock |
| PCB Dimensions (L x W) | 20 mm x 15 mm |
| Rated Current (Heater) | 20 mA |
Typical values from the manufacturer's datasheet. Confirm the exact variant before you build a product around it.
| VCC | Power |
|---|---|
| GND | Ground |
| DO | Digital out on vibration |
Typical pin names. Boards from different makers can differ, so check the print on your module.
Step-by-step builds that use parts from Tilt, Inclinometer & Vibration Sensors.
Category: Tilt, Inclinometer & Vibration Sensors; Mounting: Via PCB Holes; Interface: 3-Pin Header (GND, VCC, SIG); Output Signal: Digital (Active LOW); Model / Component: SW-18015P Vibration Switch Module; Operating Voltage: 3.3V - 12V DC. The full list is under Specifications.
VCC: Power; GND: Ground; DO: Digital out on vibration. These are the typical pin names shown under Pinout & wiring. Boards from different makers can differ, so check the print on your module.
Yes. Prices include GST and every order comes with a GST invoice. Add your GSTIN at checkout and we put it on the invoice for input credit.
Delivery is a flat ₹80 anywhere in India, and free on orders over ₹999. We ship from our Bengaluru and Guwahati warehouses, whichever is nearer to you, and the product page shows an estimated delivery date for your PIN code.
Yes, on eligible PIN codes for orders up to ₹5,000. A ₹150 COD charge is added at checkout, and checkout shows whether COD is available for your order. You can also pay by UPI, card or net banking.
Yes, if it arrives damaged, defective or is not what you ordered: tell us within 7 days of delivery and we collect it free and send a replacement or a full refund. We do not take back parts that are not faulty, so check the specs or ask us before you order. You can cancel for free until the order is dispatched.
Yes. The price per unit drops automatically at higher quantities, as shown in the price tiers above. For 100+ pieces or a purchase order, ask for a bulk quote.
Check the specifications for voltage and interface, or ask Geeko AI. It can suggest compatible boards and wiring.
Guides for this part and its category.

₹51.00
Incl. GST
₹170.00
Incl. GST
₹589.00
Incl. GST
₹499.00
Incl. GSTNo reviews yet. Bought or built with this? Be the first to review it.