Shop by category
Shop all components
RP2040 & Raspberry Pi Pico Series · Waveshare
The Waveshare RP2350-Zero-CM is a compact, castellated-edge development board based on the Raspberry Pi RP2350A microcontroller, featuring a unique dual-core, dual-architecture (Arm Cortex-M33 / RISC-V) design for embedded projects. It is programmable via USB-C drag-and-drop and is ideal for space-constrained IoT applications requiring flexible I/O and low-power modes.
📖Guide for this partRP2350 Development Boards→Buy 10 or more to pay ₹645.05 each
Business and institution accounts get extra tier pricing. Sign in for 100+ pieces.
Ships in 2-4 weeks
We source this item for your order. It is dispatched within 2 to 4 weeks; if we cannot get it, we cancel it and refund you in full. Prepaid only.
Overview
The Waveshare RP2350-Zero-CM Mini Development Board is engineered for developers requiring a high-performance, space-efficient microcontroller platform. Its core is the Raspberry Pi RP2350A, which uniquely offers a choice between dual Arm Cortex-M33 cores or dual Hazard 3 RISC-V cores, providing architectural flexibility for different firmware toolchains and performance needs. The board’s compact, castellated-edge design is a key feature, allowing it to be directly soldered as a surface-mount component onto a custom PCB, eliminating connectors and saving significant vertical space.
With 520KB of SRAM and 2MB of onboard Flash, the board supports complex embedded applications. Its extensive peripheral set, including programmable I/O (PIO) state machines, enables precise timing control for custom protocols without CPU overhead. Power management is handled via the USB-C port, which also serves as the primary programming interface using a simple drag-and-drop method, streamlining the development workflow for rapid prototyping and deployment in IoT nodes, industrial controllers, and compact automation devices.
Good for
Category
RP2040 & Raspberry Pi Pico SeriesSKU
GB-IOWC-0887
| Brand / part no. | Waveshare |
|---|---|
| ADC | 4 × 12-Bit |
| I2C | 2 × I2C |
| PIO | 12 × Programmable I/O State Machines |
| PWM | 16 Channels |
| SPI | 2 × SPI |
| GPIO | 29 × Multifunction GPIO |
| SRAM | 520KB |
| UART | 2 × UART |
| Category | AIoT & Display Development Boards (TFT, e-Paper, Touch) |
| Module Type | Castellated Module |
| USB Support | USB 1.1 Device and Host |
| Flash Memory | 2MB |
| Power Supply | USB Type-C |
| USB Connector | USB Type-C Male |
| Low-Power Modes | Sleep and Dormant |
| CPU Architecture | Dual-Core Arm Cortex-M33 / Hazard 3 RISC-V |
| Programming Method | USB Mass Storage Drag-and-Drop |
| Maximum Clock Speed | 150 MHz |
| Microcontroller/SoC | Raspberry Pi RP2350A |
Typical values from the manufacturer's datasheet. Confirm the exact variant before you build a product around it.
| VBUS | USB 5 V |
|---|---|
| VSYS | Main supply in, 1.8–5.5 V |
| 3V3(OUT) | 3.3 V out, up to 300 mA |
| GND | Ground (8 pins) |
| GP0–GP22 | Digital I/O, UART/SPI/I²C/PWM |
| GP26–GP28 | ADC0–ADC2 |
| RUN | Reset, pull low |
| ADC_VREF | ADC reference |
Typical pin names. Boards from different makers can differ, so check the print on your module.
Library: MicroPython UF2 or Pico SDK
# MicroPython: blink the on-board LED
from machine import Pin
import time
led = Pin("LED", Pin.OUT)
while True:
led.toggle()
time.sleep(0.5)Step-by-step builds that use parts from RP2040 & Raspberry Pi Pico Series.
ADC: 4 × 12-Bit; I2C: 2 × I2C; PIO: 12 × Programmable I/O State Machines; PWM: 16 Channels; SPI: 2 × SPI; GPIO: 29 × Multifunction GPIO. The full list is under Specifications.
VBUS: USB 5 V; VSYS: Main supply in, 1.8–5.5 V; 3V3(OUT): 3.3 V out, up to 300 mA; GND: Ground (8 pins); GP0–GP22: Digital I/O, UART/SPI/I²C/PWM; GP26–GP28: ADC0–ADC2; RUN: Reset, pull low; ADC_VREF: ADC reference. These are the typical pin names shown under Pinout & wiring. Boards from different makers can differ, so check the print on your module.
MicroPython UF2 or Pico SDK. You can copy the example code from this page.
Yes. Prices include GST and every order comes with a GST invoice. Add your GSTIN at checkout and we put it on the invoice for input credit.
Delivery is a flat ₹80 anywhere in India, and free on orders over ₹999. We ship from our Bengaluru and Guwahati warehouses, whichever is nearer to you, and the product page shows an estimated delivery date for your PIN code.
Yes, on eligible PIN codes for orders up to ₹5,000. A ₹150 COD charge is added at checkout, and checkout shows whether COD is available for your order. You can also pay by UPI, card or net banking.
Yes, if it arrives damaged, defective or is not what you ordered: tell us within 7 days of delivery and we collect it free and send a replacement or a full refund. We do not take back parts that are not faulty, so check the specs or ask us before you order. You can cancel for free until the order is dispatched.
Yes. The price per unit drops automatically at higher quantities, as shown in the price tiers above. For 100+ pieces or a purchase order, ask for a bulk quote.
Check the specifications for voltage and interface, or ask Geeko AI. It can suggest compatible boards and wiring.
Guides for this part and its category.
No reviews yet. Bought or built with this? Be the first to review it.