Component guide · Intermediate · 5 min read
RP2350 Development Boards

Waveshare RP2350-Zero, Zero-CM, Tiny, Plus and Plus-16MB, RP2350-One USB-A, RP2350-USB-C, RP2350A USB Mini, RP2350-PiZero, RP2350-Matrix and Core2350B with PSRAM, WeAct Studio RP2350A and RP2350B, DFRobot Beetle RP2350 and Elecrow RP2350 Pico W5
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
RP2350 is the chip on the Raspberry Pi Pico 2. It has two Arm Cortex-M33 cores and two Hazard3 RISC-V cores (you choose which pair runs), 520KB RAM, security features and more PIO. These boards put it in different shapes: Zero and Tiny are thumb-sized, Plus is a Pico-shaped board with more flash, One plugs straight into a USB port, PiZero has HDMI and an SD slot, and RP2350B boards bring 48 GPIO.
Key specs at a glance
- CPU
- 2x Cortex-M33 or 2x Hazard3 RISC-V, 150 MHz
- RAM
- 520KB SRAM; 8MB PSRAM on Core2350B
- Flash
- 2 to 16MB depending on board
- GPIO
- 30 on RP2350A, 48 on RP2350B
- Extras
- WS2812 LED on Zero, 8x8 RGB matrix and IMU on Matrix, HDMI on PiZero, Wi-Fi on Pico W5
- Programming
- UF2 drag-and-drop, MicroPython, CircuitPython, Arduino, Pico SDK
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Waveshare RP2350-Zero Mini Development Board₹599
Option 2Waveshare RP2350-Zero-CM Mini Development Board, Dual-Core RP2350A, Castellated₹679
Option 3Waveshare RP2350-Tiny Dev Board w/ RP2350A Dual-Core MCU₹629
Option 4Waveshare RP2350-Plus Development Board w/ RP2350A Dual-Core MCU₹669
Option 5Waveshare RP2350-Plus-16MB-M Development Board w/ RP2350A Dual-Core MCU₹859
Option 6Waveshare RP2350-One MCU Board w/ PCB Type-A Plug₹669
What the RP2350 boards: Waveshare RP2350 Zero, Tiny, Plus, One, USB-C, PiZero, Matrix and Core2350B, WeAct RP2350, DFRobot Beetle RP2350 and Elecrow Pico W5 is
RP2350 mini and Pico-style boards, such as the Pico 2, Pimoroni Tiny 2350 and Waveshare RP2350-Zero, put the RP2350 chip on small boards with USB, flash and headers.
Hold BOOT while plugging in USB, and the board appears as a drive; drop a MicroPython or CircuitPython UF2 file on it, or your compiled program. In Arduino IDE, use the Earle Philhower RP2040/RP2350 core and pick the matching board.
Use the RP2350 UF2 files, not RP2040 ones. Check each board's pinout card: the Zero's LED is a WS2812 on GPIO16, not a plain LED on GPIO25 like the Pico. Pins are 3.3V only.
RP2350 boards: Waveshare RP2350 Zero, Tiny, Plus, One, USB-C, PiZero, Matrix and Core2350B, WeAct RP2350, DFRobot Beetle RP2350 and Elecrow Pico W5 pinout
The pins on the RP2350 boards: Waveshare RP2350 Zero, Tiny, Plus, One, USB-C, PiZero, Matrix and Core2350B, WeAct RP2350, DFRobot Beetle RP2350 and Elecrow Pico W5 and what each one does.
| Pin | Function |
|---|---|
| GPIO0-29 | 3.3V GPIO (RP2350A) |
| GPIO30-47 | Extra GPIO on RP2350B boards |
| GP26-29 | ADC inputs |
| BOOT | Hold for USB drive mode |
| 5V / 3V3 | USB 5V and regulated 3.3V |
- GPIO0-29
- 3.3V GPIO (RP2350A)
- GPIO30-47
- Extra GPIO on RP2350B boards
- GP26-29
- ADC inputs
- BOOT
- Hold for USB drive mode
- 5V / 3V3
- USB 5V and regulated 3.3V
Wiring the RP2350 boards: Waveshare RP2350 Zero, Tiny, Plus, One, USB-C, PiZero, Matrix and Core2350B, WeAct RP2350, DFRobot Beetle RP2350 and Elecrow Pico W5
Never put 5V on a GPIO pin; RP2350 pins are 3.3V only (some are 5V tolerant only when powered).
| RP2350 boards: Waveshare RP2350 Zero, Tiny, Plus, One, USB-C, PiZero, Matrix and Core2350B, WeAct RP2350, DFRobot Beetle RP2350 and Elecrow Pico W5 pin | Connection | Note |
|---|---|---|
| USB-C | PC | Hold BOOT to flash |
| GPIO16 (Zero) | Onboard WS2812 | Use neopixel library |
| 3V3 / GND | Sensors | 3.3V logic only |
- USB-C
- Connection:
- PC
- Note:
- Hold BOOT to flash
- GPIO16 (Zero)
- Connection:
- Onboard WS2812
- Note:
- Use neopixel library
- 3V3 / GND
- Connection:
- Sensors
- Note:
- 3.3V logic only
Example code
On a Plus or Pico-style board with a plain LED, use Pin('LED', Pin.OUT).toggle() instead.
from machine import Pin
import neopixel, time
np = neopixel.NeoPixel(Pin(16), 1) # GPIO16 on RP2350-Zero; check your board
colours = [(32, 0, 0), (0, 32, 0), (0, 0, 32)]
while True:
for c in colours:
np[0] = c
np.write()
time.sleep(0.5)Setup and tuning
hold BOOTSEL and plug in USB, then drop a MicroPython or CircuitPython UF2, or upload from the Arduino IDE (Earle Philhower core).
choose Arm or RISC-V builds; Arm is the most supported.
GPIO is 3.3 V; check the board for 5 V tolerance (RP2350 has some 5 V-tolerant inputs, but not ADC pins).
mini boards change pin layouts, so read the board's pinout card.
feed 5 V over USB or VSYS, or 3.3 V to the 3V3 pin per board design.
What you need
Shop this list20 of 20 found in our store · ₹13,940
Waveshare RP2350-Zero Mini Development Board: the part this guide coversWaveshare RP2350-Zero Mini Development Board₹599
Waveshare RP2350-Zero-CM Mini Development Board, Dual-Core RP2350A, Castellated: another version this guide coversWaveshare RP2350-Zero-CM Mini Development Board, Dual-Core RP2350A, Castellated₹679
Waveshare RP2350-Tiny Dev Board w/ RP2350A Dual-Core MCU: another version this guide coversWaveshare RP2350-Tiny Dev Board w/ RP2350A Dual-Core MCU₹629
Waveshare RP2350-Plus Development Board w/ RP2350A Dual-Core MCU: another version this guide coversWaveshare RP2350-Plus Development Board w/ RP2350A Dual-Core MCU₹669
Waveshare RP2350-Plus-16MB-M Development Board w/ RP2350A Dual-Core MCU: another version this guide coversWaveshare RP2350-Plus-16MB-M Development Board w/ RP2350A Dual-Core MCU₹859
Waveshare RP2350-One MCU Board w/ PCB Type-A Plug: another version this guide coversWaveshare RP2350-One MCU Board w/ PCB Type-A Plug₹669
Waveshare RP2350-USB-C Development Board w/ RP2350A Dual-Core ARM/RISC-V: another version this guide coversWaveshare RP2350-USB-C Development Board w/ RP2350A Dual-Core ARM/RISC-V₹689
Waveshare RP2350-USB-C Microcontroller Dev Board w/ RP2350A: another version this guide coversWaveshare RP2350-USB-C Microcontroller Dev Board w/ RP2350A₹699
Waveshare RP2350A USB Mini Dev Board, Raspberry Pi Dual-Core MCU: another version this guide coversWaveshare RP2350A USB Mini Dev Board, Raspberry Pi Dual-Core MCU₹649
Waveshare RP2350-PiZero Development Board w/ 16MB Flash: another version this guide coversWaveshare RP2350-PiZero Development Board w/ 16MB Flash₹1,169
Waveshare RP2350-Matrix Board w/ IMU & 8×8 RGB Matrix: another version this guide coversWaveshare RP2350-Matrix Board w/ IMU & 8×8 RGB Matrix₹1,099
Waveshare Core2350B RP2350B Core Board with 8MB PSRAM: another version this guide coversWaveshare Core2350B RP2350B Core Board with 8MB PSRAM₹779
WeAct Studio RP2350AV10 RISC-V RP2350 Dev Board w/ 16MB Flash: another version this guide coversWeAct Studio RP2350A_V10 RISC-V RP2350 Dev Board w/ 16MB Flash₹609
WeAct Studio RP2350AV10 RISC-V RP2350 Dev Board w/ 4MB Flash: another version this guide coversWeAct Studio RP2350A_V10 RISC-V RP2350 Dev Board w/ 4MB Flash₹469
WeAct Studio RP2350AV20 RP2040 Development Board: another version this guide coversWeAct Studio RP2350A_V20 RP2040 Development Board₹689
WeAct Studio RP2350AV20 Raspberry Pi RP2350A ARM Cortex-M0+ Dev Board: another version this guide coversWeAct Studio RP2350A_V20 Raspberry Pi RP2350A ARM Cortex-M0+ Dev Board₹499
WeAct Studio RP2350B RISC-V Development Board w/ 16MB Flash: another version this guide coversWeAct Studio RP2350B RISC-V Development Board w/ 16MB Flash₹729
DFRobot Beetle RP2350 Mini Dual-Core Dev Board: another version this guide coversDFRobot Beetle RP2350 Mini Dual-Core Dev Board₹599
Elecrow RP2350 Pico W5 Board: another version this guide coversElecrow RP2350 Pico W5 Board₹1,109
Dupont jumper wires: for the connectionsDupont Jumper Wires (40 pcs)₹49Closest match, check the specs
Alternatives and when to choose them
- Raspberry Pi Pico: the reference board.
- RP2040 boards beyond the Pico: the older chip.
- Waveshare RP2040 and RP2350 display boards: boards with screens.
Common mistakes to avoid
- Assuming every pin is 5 V tolerant.
- Using a charge-only cable.
- Using Pico pin numbers on a mini board.
- Old libraries that do not support the RP2350.
Frequently asked questions
Is the Pico 2 compatible with Pico projects?
Mostly yes. It has the same pinout, but some libraries need updates for the RP2350.
Can I use Arduino IDE with RP2350 boards?
Yes, with the Earle Philhower Raspberry Pi Pico core.
Are RP2350 pins 5 V tolerant?
Some digital inputs are 5 V tolerant when powered, but ADC pins and outputs are not.
Should I use the Arm or RISC-V cores?
Use Arm for best support; try RISC-V for learning.
Why does the board not appear as a drive?
Hold BOOTSEL while plugging in, and use a data USB cable.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.
