Rebuild a V6 hotend and change the nozzle the right way
Fix clogs and leaks for good: strip, clean and rebuild a V6-style hotend, then hot-tighten a fresh nozzle.
Shop by category
Shop all componentsA handheld 3D scanner turns a real object into a mesh you can repair, scale and print. You will scan a small part, clean and close the mesh, check the key dimensions with calipers and print a copy in PETG.
Do not look into the scanner's light source.
Tick anything you already have and the total updates.
Add texture or markers around the part and move more slowly.
Scan the missing angles again and merge.
Scale holes up slightly or redraw them in CAD.
Very small features are below its resolution; redraw them in CAD.
Usually not; it needs cleaning and closing.
Yes, with their permission; larger scanners are better for bodies.
2 parts: Creality CR-Scan Ferret SE and SUNLU PETG Filament Yellow 1.75mm 1kg. On this page you can tick the parts you already have and add only the rest to your cart.
It is a intermediate project and takes about half a day. The build on this page has 5 steps.
No. It is a hardware circuit with no microcontroller and no code. Build it on a breadboard from the wiring table and steps on this page.
About ₹31,338 for the parts at the prices on this page. Quantity price breaks lower the cost when you build several.
How structured-light scanners work; Cleaning and closing a mesh; Checking a scan against calipers.
Do not look into the scanner's light source.
Ideas that reuse this build: Print a weatherproof enclosure. They are listed under Take it further on this page.
Fix clogs and leaks for good: strip, clean and rebuild a V6-style hotend, then hot-tighten a fresh nozzle.
A NEMA 17, a GT2 belt and an endstop make a homing axis: the same parts that move every 3D printer and plotter.
Stop re-levelling by hand: fit a CR Touch probe and a textured PEI spring-steel sheet for first layers that just stick.
Unbox, level, slice and print: a phone stand, a cable clip and a calibration cube, with the checks that save most beginners a week.
Learning project. Check every circuit and the datasheet of each part before you power it up.