Same-day dispatch before 2 PM · Free delivery over ₹999 · GST invoices Get the appPrices incl. GST
Geekobot
Snap & SendNEWGeeko AIWhere's myOrder
Log in
Products
  • Projects
    • Component guidesHow parts work, with code you can run
    • Learning pathsFrom your first LED to your first robot
    • Workshops & eventsOnline sessions for makers and classes
    • ElectrolarkFree guided builds, simulator and certificates
    • Students & teachersStudent discount and classroom help
    • CommunityShare builds and ask other makers
    • CalculatorsOhm's law, LED resistor, 555 and 100+ more
    • Circuit builderWire parts and run the circuit, powered by Electrolark
    • Geeko AIAsk what to buy or how to wire it
    • Snap & SendPhotograph a part or list, we find it
    • Part finderAnswer a few questions, get the right part
    • Compatibility checkWill these two parts work together?
    • Compare partsSpecs side by side
    • Business & bulk ordersGST invoices, credit and volume prices
    • Request a quotationSend your list, get a quote
    • Classroom kitsPer-student kits and lab bundles
    • Gift cardsFor students, teams and events
  • Atal Tinkering Lab
BOM to cart
Geekobot

Components, kits and know-how for makers, students, engineers, labs and businesses across India.

Ask Geeko AIOrders, parts and projects, any timeEmail supportReply within 1 working dayGet the Geekobot appAdd it to your home screen, free

Follow us

Shop

  • Boards & SBCs
  • Sensors & Modules
  • IoT & Wireless
  • Drone & FPV
  • 3D Printing
  • Filaments & Resins
  • Motors & Drivers
  • Power & Batteries
  • Semiconductors
  • Passive
  • Displays & LEDs
  • Switches & Relays
  • Wires & Cables
  • Prototyping
  • Tools & Test
  • Robotics
  • STEM Kits
  • Atal Tinkering Lab
  • Mechanical Parts
  • Audio

Orders

  • Track your order
  • Help & support
  • Shipping and delivery
  • Refunds and cancellation
  • Contact us

Learn

  • Projects
  • Geeko AI project assistant
  • Learning paths
  • Guides
  • Calculators
  • Electrolark: free guided builds

Part tools

  • Part finder
  • Compare parts
  • Will it work with my board?

Institutions

  • Classroom kits
  • Atal Tinkering Lab
  • Students & teachers
  • Workshops & Events

Business

  • Business & education
  • Request a quotation
  • BOM bulk upload
  • Quick order by SKU

Company

  • About Geekobot
  • Community
  • Gift cards
  • Terms & conditions
  • Privacy policy
  • Product directory
  • Sitemap

© 2026 Geekobot, a trade name of OLatus Systems Private Limited. All rights reserved.

20, 1st Floor, Neeladri Complex, 10th Cross, Sampige Rd, 2nd Main, Malleshwaram, Bengaluru, Karnataka 560003 · GSTIN 29AACCO0462F1ZM

+91 91810 15607 · connect@geekobot.in · Monday to Saturday, 10 AM to 2 PM IST

UPI · CARDS · NETBANKING · GST INVOICES

ShopProjectsGeeko AIGuides
Compare 0 parts →
Log in

Shop by category

Shop all components
  • Boards & SBCs1,910 products
    • Alternative Single Board Computers
    • Arduino Ecosystem
    • FPGA & Logic Boards
    • Microcontroller & Wireless Boards
    View all
  • Sensors & Modules4,701 products
    • Biomedical & Heart Rate
    • Current, Voltage & Power
    • Force, Weight & Pressure
    • Gas, Weather & Environmental
    View all
  • IoT & Wireless2,314 products
    • RF Modules
    • RFID & NFC
    • Antennas & RF Accessories
    • Cameras & Smart Vision
    View all
  • Drone & FPV3,558 products
    • Flight Control & Navigation
    • FPV Video & Optics
    • Frames & Structural Parts
    • Motors & Propulsion
    View all
  • 3D Printing2,204 products
    • 3D Printers
    • 3D Scanners & Digitizers
    • Laser Engravers & Cutters
    • Material Management & Upgrades
    View all
  • Filaments & Resins1,472 products
    • Filaments
    • Photopolymer Resins
    View all
  • Motors & Drivers463 products
    • BLDC Motor Drivers
    • DC & Geared Motors
    • DC Motor Drivers
    • Linear Actuators & Solenoids
    View all
  • Power & Batteries557 products
    • Battery Holders & Connectors
    • Breadboard Power
    • Chargers & BMS
    • DC-DC Converters
    View all
  • Semiconductors295 products
    • Diodes & Rectifiers
    • Interface & RF Encoder ICs
    • Logic ICs (74xx)
    • Logic ICs (CD4000)
    View all
  • Passive67 products
    • Capacitors
    • Circuit Protection
    • Crystals & Oscillators
    • Inductors
    View all
  • Displays & LEDs572 products
    • 7-Segment & Dot Matrix
    • Addressable LEDs
    • Character LCDs
    • Graphic LCDs
    View all
  • Switches & Relays184 products
    • Keypads & Touch
    • Push Buttons & Tactile
    • Relay Modules
    • Relays
    View all
  • Wires & Cables233 products
    • Board-to-Wire Connectors
    • Crimp & Splice
    • Headers & Dupont
    • Heat Shrink & Sleeving
    View all
  • Prototyping101 products
    • Breadboards
    • Interface Modules
    • PCBs & Perfboards
    View all
  • Tools & Test717 products
    • Bench Power Supplies
    • Hand Tools
    • Measuring Tools
    • Meters & Testers
    View all
  • Robotics180 products
    • Humanoid & Legged Robots
    • Robot Chassis & Platforms
    • Robotic Arms & Grippers
    • Wheels & Casters
    View all
  • STEM Kits268 products
    • Arduino Learning Kits
    • Coding & IoT Kits
    • Early Coding (Ages 3-8)
    • Invention Kits
    View all
  • Atal Tinkering Lab196 products
    • Package 1: Electronics, Robotics, IoT and Sensors
    • Package 2: Rapid Prototyping Tools
    • Package 3: Mechanical, Electrical and Measurement Tools
    • Package 4: Power Supply, Accessories and Safety Equipment
    View all
  • Mechanical Parts212 products
    • Bearings
    • Brackets & Mounts
    • Couplers
    • Fasteners & Standoffs
    View all
  • Audio109 products
    • Amplifier Modules
    • Buzzers & Sirens
    • Speakers
    View all
  1. Home
  2. ›Projects
  3. ›Object counter

Sensor projects

Conveyor and production line counter

Counts parts on a conveyor, coins in a slot or pills in a dispenser.

By Geekobot Learning Team

Beginner
Difficulty
45 minutes
Build time
₹350
Parts cost
6
Parts
Arduino
Platform
Add all parts · ₹350Start building
  • Measurement & tools
  • Learning & classroom
NANO12:30
Tap a part to see what it does
OverviewPartsWiringBuildCodeTroubleshootFAQIdeas

What you'll build

The TCRT5000 sees anything that passes a few millimetres above it. Every new object adds one to the display; the button resets the count. Small factories and workshops use the same principle to count production.

What you'll learn

  • Infrared reflectance sensing
  • Multiplexed 7-segment displays
  • Pull-ups and debouncing
  1. SenseTCRT5000 dual line sensor, Push button
  2. ThinkNano counts each object that passes over the infrared sensor
  3. ActTM1637 4-digit display

Parts list

Tick anything you already have and the total updates.

PartQtyPrice
  • NANO
    Nano CH340 Development Board (Soldered)
    GB-SBCD-0339Guide

    The brain of the project

    × 1₹185₹185
  • TCRT5000 Dual Channel Line Tracking Sensor Module
    SENS-3296Guide

    Two infrared reflectance sensors: black tape reflects little IR, white floor reflects a lot, so each output tells you which side the line is on.

    × 1₹36₹36
  • 12:30
    TM1637 4-Digit 7-Segment Display Module
    GB-DISP-0011Guide

    Bright 4-digit 7-segment display driven by two wires.

    × 1₹55₹55
  • Tactile Push Button Switch
    GB-SWRL-0007Guide

    Momentary push button.

    × 1₹7₹7
  • Solderless Breadboard (830 points)
    GB-PROT-0001Guide

    Holds everything together without soldering

    × 1₹18₹18
  • Dupont Jumper Wires (40 pcs)
    GB-WIRE-0001Guide

    Connects the parts

    × 1₹49₹49

Complete kit

6 of 6 parts in one tap

₹350

GST included

3% off these parts while the whole kit stays in your cart

Parts you still need

₹350

6 of 6 parts. Tick anything you already have.

About ₹10,500 before bulk pricing for 30 kits.

Request bulk quote

Tools you'll need

  • Digital Multimeter
  • Wire Stripper and Cutter

Learn the parts

  • ESP32 vs Arduino Uno
  • IR Obstacle Sensor Module
  • TM1637 4-digit display
  • Pull-Up and Pull-Down Resistors
  • Arduino Uno

Calculators for this build

  • 7-segment and LED matrix current calculator (multiplexing)
  • Switch debounce calculator (RC filter)

Wiring

Follow the colours: red is power, dark grey is ground, blue is a signal.

PartPinConnect toNote
TCRT5000 dual line sensorVCC5V
TCRT5000 dual line sensorGNDGND
TCRT5000 dual line sensorOUT1 (left)D2
TCRT5000 dual line sensorOUT2 (right)D3
TM1637 4-digit displayVCC5V
TM1637 4-digit displayGNDGND
TM1637 4-digit displayCLKD4
TM1637 4-digit displayDIOD5
Push buttonLEG1D6
Push buttonLEG2GND
  • TCRT5000 dual line sensorVCC → 5V
  • TCRT5000 dual line sensorGND → GND
  • TCRT5000 dual line sensorOUT1 (left) → D2
  • TCRT5000 dual line sensorOUT2 (right) → D3
  • TM1637 4-digit displayVCC → 5V
  • TM1637 4-digit displayGND → GND
  • TM1637 4-digit displayCLK → D4
  • TM1637 4-digit displayDIO → D5
  • Push buttonLEG1 → D6
  • Push buttonLEG2 → GND
Built it? Check your wiring before you power up.Pick the pin each wire went to and we'll point out swapped pins, power mistakes and pins that clash.

Step-by-step build

0 of 8 done

Code

conveyor_object_counter.inoVerify & upload in Electrolark
// Conveyor and production line counter
// Geekobot project library · board: Arduino Nano
// Wiring diagram, parts list and build steps: Geekobot project page "conveyor-object-counter"

#include <TM1637Display.h>

// ---- pins ----
const uint8_t LINE_LEFT = 2;
const uint8_t LINE_RIGHT = 3;
const uint8_t SEG_CLK = 4;
const uint8_t SEG_DIO = 5;
const uint8_t BUTTON_PIN = 6;

TM1637Display seg(SEG_CLK, SEG_DIO);

int count = 0;
bool wasBlocked = false;

void setup() {
  Serial.begin(115200);
  pinMode(LINE_LEFT, INPUT);
  pinMode(LINE_RIGHT, INPUT);
  seg.setBrightness(5);
  seg.clear();
  pinMode(BUTTON_PIN, INPUT_PULLUP);
  seg.showNumberDec(0);
}

void loop() {
  bool blocked = digitalRead(LINE_LEFT) == LOW;        // an object over the left sensor
  if (blocked && !wasBlocked) { count++; seg.showNumberDec(count); Serial.println(count); delay(40); }
  wasBlocked = blocked;
  if (digitalRead(BUTTON_PIN) == LOW) { count = 0; seg.showNumberDec(0); delay(300); }
  delay(5);
}

Run it: what this code does

The sketch above runs here on a simulated Arduino Nano. Move the sliders for the sensors and buttons it reads, and watch the Serial monitor, display and outputs change.

Troubleshooting

The sensor never changes, or always reads the same+

Lower the sensor to 5–10 mm from the surface and re-tune the trimmer until its LED switches between the light and dark surface.

Shows nothing+

CLK and DIO swapped; swap them.

Button always pressed+

The button is rotated 90°; legs on the same side are already connected. Turn it.

Nothing happens after uploading+

Open the Serial Monitor at 115200 baud and check for messages. Make sure you chose the right board and port in the Arduino IDE.

Upload fails+

Close other programs using the serial port, try another USB cable (some are charge-only) and press reset just before uploading.

FAQ

Can I use an ESP32 instead of the Arduino?+

Yes. Most of the code works unchanged on an ESP32 with the ESP32 board package. Watch for 5 V modules: ESP32 pins are 3.3 V, so 5 V output signals need a resistor divider.

How do I power it without a computer?+

Use a 5 V USB phone charger or a power bank into the board's USB port.

What parts do I need to build the conveyor and production line counter?+

6 parts: Nano CH340 Development Board (Soldered), TCRT5000 Dual Channel Line Tracking Sensor Module, TM1637 4-Digit 7-Segment Display Module, Tactile Push Button Switch, Solderless Breadboard (830 points) and Dupont Jumper Wires (40 pcs). Tools: Digital Multimeter and Wire Stripper and Cutter. On this page you can tick the parts you already have and add only the rest to your cart.

How hard is it and how long does it take?+

It is a beginner project and takes about 45 minutes. The build on this page has 8 steps.

Do I need to write the code myself?+

No. This page has the complete, tested code (conveyor_object_counter.ino). Install this library first: TM1637.

Can I see what the code does before I build it?+

Yes. The Run it panel under the code runs this exact sketch on a simulated board. Move the sliders or press the buttons for the sensors it reads, and the Serial monitor, display and outputs react as they will on the real build. It is a simulation, so real readings depend on your parts and wiring.

How much does the conveyor and production line counter cost to build?+

About ₹350 for the parts at the prices on this page, plus tools if you do not have them. Quantity price breaks lower the cost when you build several.

What will I learn from this project?+

Infrared reflectance sensing; Multiplexed 7-segment displays; Pull-ups and debouncing.

What can I build next with these parts?+

Ideas that reuse this build: Doorway visitor counter and Colour sorter. They are listed under Take it further on this page.

Take it further

  • Doorway visitor counter
  • Colour sorter

Related projects

  • UNO
    Sensor
    Beginner· 1 hour

    LPG gas leak alarm

    A kitchen gas sniffer that beeps and flashes the moment LPG levels climb.

    ₹505 · 8 partsArduino
  • NANO
    Sensor
    Beginner· 1–2 hours

    Smoke alarm with OLED readout

    See the smoke level live on a crisp screen and get a loud warning when it spikes.

    ₹539 · 6 partsArduino
  • UNO
    Sensor
    Beginner· 45 minutes

    Flame detector fire alarm

    An infrared eye that spots an open flame and raises the alarm.

    ₹434 · 8 partsArduino
  • UNO
    Sensor
    Beginner· 1 hour

    PIR intruder alarm

    Walk into the room and it sounds the alarm: the classic first security build.

    ₹459 · 8 partsArduino

Learning project. Check every circuit and the datasheet of each part before you power it up.

Run itChange the inputs and watch the output
0
Serial monitor115200 baud
 

A simulation of the sketch above, so you know what to expect. Real readings vary with your parts and wiring.

Ask the Community

Ask a question Share your build