Same-day dispatch before 2 PM · Free delivery over ₹999 · GST invoices Get the appPrices incl. GST
Geekobot
Snap & SendNEWGeeko AIWhere's myOrder
Log in
Products
  • Projects
    • Component guidesHow parts work, with code you can run
    • Learning pathsFrom your first LED to your first robot
    • Workshops & eventsOnline sessions for makers and classes
    • ElectrolarkFree guided builds, simulator and certificates
    • Students & teachersStudent discount and classroom help
    • CommunityShare builds and ask other makers
    • CalculatorsOhm's law, LED resistor, 555 and 100+ more
    • Circuit builderWire parts and run the circuit, powered by Electrolark
    • Geeko AIAsk what to buy or how to wire it
    • Snap & SendPhotograph a part or list, we find it
    • Part finderAnswer a few questions, get the right part
    • Compatibility checkWill these two parts work together?
    • Compare partsSpecs side by side
    • Business & bulk ordersGST invoices, credit and volume prices
    • Request a quotationSend your list, get a quote
    • Classroom kitsPer-student kits and lab bundles
    • Gift cardsFor students, teams and events
  • Atal Tinkering Lab
BOM to cart
Geekobot

Components, kits and know-how for makers, students, engineers, labs and businesses across India.

Ask Geeko AIOrders, parts and projects, any timeEmail supportReply within 1 working dayGet the Geekobot appAdd it to your home screen, free

Follow us

Shop

  • Boards & SBCs
  • Sensors & Modules
  • IoT & Wireless
  • Drone & FPV
  • 3D Printing
  • Filaments & Resins
  • Motors & Drivers
  • Power & Batteries
  • Semiconductors
  • Passive
  • Displays & LEDs
  • Switches & Relays
  • Wires & Cables
  • Prototyping
  • Tools & Test
  • Robotics
  • STEM Kits
  • Atal Tinkering Lab
  • Mechanical Parts
  • Audio

Orders

  • Track your order
  • Help & support
  • Shipping and delivery
  • Refunds and cancellation
  • Contact us

Learn

  • Projects
  • Geeko AI project assistant
  • Learning paths
  • Guides
  • Calculators
  • Electrolark: free guided builds

Part tools

  • Part finder
  • Compare parts
  • Will it work with my board?

Institutions

  • Classroom kits
  • Atal Tinkering Lab
  • Students & teachers
  • Workshops & Events

Business

  • Business & education
  • Request a quotation
  • BOM bulk upload
  • Quick order by SKU

Company

  • About Geekobot
  • Community
  • Gift cards
  • Terms & conditions
  • Privacy policy
  • Product directory
  • Sitemap

© 2026 Geekobot, a trade name of OLatus Systems Private Limited. All rights reserved.

20, 1st Floor, Neeladri Complex, 10th Cross, Sampige Rd, 2nd Main, Malleshwaram, Bengaluru, Karnataka 560003 · GSTIN 29AACCO0462F1ZM

+91 91810 15607 · connect@geekobot.in · Monday to Saturday, 10 AM to 2 PM IST

UPI · CARDS · NETBANKING · GST INVOICES

ShopProjectsGeeko AIGuides
Compare 0 parts →
Log in

Shop by category

Shop all components
  • Boards & SBCs1,910 products
    • Alternative Single Board Computers
    • Arduino Ecosystem
    • FPGA & Logic Boards
    • Microcontroller & Wireless Boards
    View all
  • Sensors & Modules4,701 products
    • Biomedical & Heart Rate
    • Current, Voltage & Power
    • Force, Weight & Pressure
    • Gas, Weather & Environmental
    View all
  • IoT & Wireless2,314 products
    • RF Modules
    • RFID & NFC
    • Antennas & RF Accessories
    • Cameras & Smart Vision
    View all
  • Drone & FPV3,558 products
    • Flight Control & Navigation
    • FPV Video & Optics
    • Frames & Structural Parts
    • Motors & Propulsion
    View all
  • 3D Printing2,204 products
    • 3D Printers
    • 3D Scanners & Digitizers
    • Laser Engravers & Cutters
    • Material Management & Upgrades
    View all
  • Filaments & Resins1,472 products
    • Filaments
    • Photopolymer Resins
    View all
  • Motors & Drivers463 products
    • BLDC Motor Drivers
    • DC & Geared Motors
    • DC Motor Drivers
    • Linear Actuators & Solenoids
    View all
  • Power & Batteries557 products
    • Battery Holders & Connectors
    • Breadboard Power
    • Chargers & BMS
    • DC-DC Converters
    View all
  • Semiconductors295 products
    • Diodes & Rectifiers
    • Interface & RF Encoder ICs
    • Logic ICs (74xx)
    • Logic ICs (CD4000)
    View all
  • Passive67 products
    • Capacitors
    • Circuit Protection
    • Crystals & Oscillators
    • Inductors
    View all
  • Displays & LEDs572 products
    • 7-Segment & Dot Matrix
    • Addressable LEDs
    • Character LCDs
    • Graphic LCDs
    View all
  • Switches & Relays184 products
    • Keypads & Touch
    • Push Buttons & Tactile
    • Relay Modules
    • Relays
    View all
  • Wires & Cables233 products
    • Board-to-Wire Connectors
    • Crimp & Splice
    • Headers & Dupont
    • Heat Shrink & Sleeving
    View all
  • Prototyping101 products
    • Breadboards
    • Interface Modules
    • PCBs & Perfboards
    View all
  • Tools & Test717 products
    • Bench Power Supplies
    • Hand Tools
    • Measuring Tools
    • Meters & Testers
    View all
  • Robotics180 products
    • Humanoid & Legged Robots
    • Robot Chassis & Platforms
    • Robotic Arms & Grippers
    • Wheels & Casters
    View all
  • STEM Kits268 products
    • Arduino Learning Kits
    • Coding & IoT Kits
    • Early Coding (Ages 3-8)
    • Invention Kits
    View all
  • Atal Tinkering Lab196 products
    • Package 1: Electronics, Robotics, IoT and Sensors
    • Package 2: Rapid Prototyping Tools
    • Package 3: Mechanical, Electrical and Measurement Tools
    • Package 4: Power Supply, Accessories and Safety Equipment
    View all
  • Mechanical Parts212 products
    • Bearings
    • Brackets & Mounts
    • Couplers
    • Fasteners & Standoffs
    View all
  • Audio109 products
    • Amplifier Modules
    • Buzzers & Sirens
    • Speakers
    View all
  1. Home
  2. ›Projects
  3. ›Lab gas alarm

Sensor projects

School lab gas leak alarm

Beeps when LPG or butane leaks from a Bunsen burner line in a school science lab.

By Geekobot Learning Team

Beginner
Difficulty
1 hour
Build time
₹529
Parts cost
8
Parts
Arduino
Platform
Add all parts · ₹529Start building
  • Atal Tinkering Lab · Package 1
  • Safety & security
  • Learning & classroom
  • Workshop & industry
NANO23.5°C 61%STATUS OK
Tap a part to see what it does
OverviewPartsWiringBuildCodeTroubleshootFAQIdeas

What you'll build

Lab gas taps are left slightly open surprisingly often. The MQ-6 low on the wall near the burners shows the reading on an LCD and trips the buzzer and a red light if gas builds up, so the teacher can ventilate and shut the main valve.

What you'll learn

  • Active vs passive buzzers
  • Analog sensors, ADCs and warm-up drift
  • Character displays and I²C backpacks
  • Current-limiting resistors for LEDs
Safety

A learning and early-warning aid, not a certified detector. Never rely on this build alone.

If the alarm sounds, ventilate, keep flames and switches away and shut the gas at the main valve.

This is a learning project, not a certified gas or smoke alarm. Keep a certified alarm installed.

  1. SenseMQ-6 butane sensor
  2. ThinkArduino Nano runs the sketch
  3. Act16x2 LCD (I²C), Active buzzer, Red LED

Built from Atal Tinkering Lab Package 1 items

Every main part of this project is an item on the public Package 1 equipment list, so a school lab that already owns Package 1 can build it without buying anything extra.

  • Arduino Nano or equivalent
  • MQ series gas sensors (MQ-6)
  • 16x2 LCD display (I2C)
  • Active buzzer
  • LEDs (red, green, blue, yellow, white)
  • Resistor kit
  • Solderless breadboards
  • Jumper cables (male/female)

See the full Atal Tinkering Lab packages →

Geekobot is an independent shop, not endorsed by or affiliated with NITI Aayog or the Atal Innovation Mission. Item names follow the public AIM equipment list.

Parts list

Tick anything you already have and the total updates.

PartQtyPrice
  • NANO
    Nano CH340 Development Board (Soldered)
    GB-SBCD-0339Guide

    The brain of the project

    Works with the same pins and code as the original Arduino Nano.

    × 1₹185₹185
  • MQ-6 Propane Isobutane LPG Gas Sensor Module
    SENS-0950

    Heated sensor tuned for propane and butane (LPG cylinders and camping gas).

    × 1₹93₹93
  • 23.5°C 61%STATUS OK
    LCD1602 16x2 Character LCD (blue, with I2C adapter)
    GB-DISP-0001-03

    Classic 16-character, 2-line LCD with an I²C backpack, so it needs only two signal wires.

    × 1₹109₹109
  • Active Buzzer Module 3.3–5V
    GB-AUDO-0001Guide

    Active buzzer with a built-in oscillator: apply power and it beeps at about 2.3 kHz.

    × 1₹27₹27
  • Through-Hole LED Pack (Pack of 10)
    GB-DISP-0014Guide

    Red indicator LED for the alert state.

    × 1₹15₹15
  • Resistor Assortment Kit (30 Values)
    GB-PASV-0002Guide

    220 Ω series resistor for each LED

    × 1₹33₹33
  • Solderless Breadboard (830 points)
    GB-PROT-0001Guide

    Holds everything together without soldering

    × 1₹18₹18
  • Dupont Jumper Wires (40 pcs)
    GB-WIRE-0001Guide

    Connects the parts

    × 1₹49₹49

Complete kit

8 of 8 parts in one tap

₹529

GST included

3% off these parts while the whole kit stays in your cart

Parts you still need

₹529

8 of 8 parts. Tick anything you already have.

About ₹15,870 before bulk pricing for 30 kits.

Request bulk quote

Tools you'll need

  • Digital Multimeter
  • Wire Stripper and Cutter

Learn the parts

  • ESP32 vs Arduino Uno
  • Active vs Passive Buzzers
  • RGB LEDs
  • I2C Explained
  • Arduino Uno

Calculators for this build

  • I²C pull-up resistor calculator
  • LED series resistor calculator
  • LED array calculator (series and parallel strings)

Wiring

Follow the colours: red is power, dark grey is ground, blue is a signal.

PartPinConnect toNote
MQ-6 butane sensorVCC5V
MQ-6 butane sensorGNDGND
MQ-6 butane sensorAOA0
16x2 LCD (I²C)VCC5V
16x2 LCD (I²C)GNDGND
16x2 LCD (I²C)SDAA4
16x2 LCD (I²C)SCLA5
Active buzzerVCC5V
Active buzzerGNDGND
Active buzzerI/OD2
Red LEDANODED3
Red LEDCATHODEGND
  • MQ-6 butane sensorVCC → 5V
  • MQ-6 butane sensorGND → GND
  • MQ-6 butane sensorAO → A0
  • 16x2 LCD (I²C)VCC → 5V
  • 16x2 LCD (I²C)GND → GND
  • 16x2 LCD (I²C)SDA → A4
  • 16x2 LCD (I²C)SCL → A5
  • Active buzzerVCC → 5V
  • Active buzzerGND → GND
  • Active buzzerI/O → D2
  • Red LEDANODE → D3
  • Red LEDCATHODE → GND
Built it? Check your wiring before you power up.Pick the pin each wire went to and we'll point out swapped pins, power mistakes and pins that clash.

Step-by-step build

0 of 9 done

Code

school_lab_gas_leak_alarm.inoVerify & upload in Electrolark
// School lab gas leak alarm
// Geekobot project library · board: Arduino Nano
// Wiring diagram, parts list and build steps: Geekobot project page "school-lab-gas-leak-alarm"

#include <Wire.h>
#include <LiquidCrystal_I2C.h>

// ---- pins ----
const uint8_t BUTANE_PIN = A0;
const uint8_t BUZZER_PIN = 2;
const uint8_t LED_RED = 3;

const int ADC_MAX = 1023;      // 10-bit analog input
const float VREF = 5.0f;

LiquidCrystal_I2C lcd(0x27, 16, 2);

// ---- latest readings ----
int butanePct = 0;

const unsigned long READ_EVERY_MS = 1000;
unsigned long lastRead = 0;
bool alertOn = false;
const char* statusText = "Starting";
const float ALERT_LEVEL = 35;   // set a few points above the clean-air reading after warm-up
const float HYSTERESIS = 8;    // gap that stops rapid on/off switching
const unsigned long WARMUP_MS = 60000UL;   // sensor warm-up

void setBuzzer(bool on) { digitalWrite(BUZZER_PIN, on ? HIGH : LOW); }

void setRedLed(bool on) { digitalWrite(LED_RED, on ? HIGH : LOW); }

void updateDisplay() {
  lcd.setCursor(0, 0);
  lcd.print(F("Butane "));
  lcd.print(butanePct);
  lcd.print(F("%"));
  lcd.print(F("      "));
  lcd.setCursor(0, 1);
  lcd.print(statusText);
  lcd.print(F("        "));
}

void evaluate() {
  if (millis() < WARMUP_MS) { alertOn = false; statusText = "Warming up"; return; }
  if (!alertOn && butanePct > ALERT_LEVEL) alertOn = true;
  else if (alertOn && butanePct < ALERT_LEVEL - HYSTERESIS) alertOn = false;
  statusText = alertOn ? "GAS LEAK" : "Air normal";
}

void setup() {
  Serial.begin(115200);
  lcd.init();
  lcd.backlight();
  pinMode(BUZZER_PIN, OUTPUT);
  setBuzzer(false);
  pinMode(LED_RED, OUTPUT);
}

void loop() {
  if (millis() - lastRead >= READ_EVERY_MS) {
    lastRead = millis();
    butanePct = (int)(analogRead(BUTANE_PIN) * 100L / ADC_MAX);
    evaluate();
    Serial.print(F("Butane="));
    Serial.print(butanePct);
    Serial.print(F("%"));
    Serial.print(F(", status=")); Serial.println(statusText);
    updateDisplay();
  }
  setBuzzer(alertOn && (millis() / 250) % 2 == 0);   // intermittent beep
  setRedLed(alertOn && (millis() / 250) % 2 == 0);
}

Run it: what this code does

The sketch above runs here on a simulated Arduino Nano. Move the sliders for the sensors and buttons it reads, and watch the Serial monitor, display and outputs change.

Troubleshooting

Reading is high right after power-up+

Normal: the heater needs a few minutes to settle. Wait before calibrating the threshold.

Backlight on but no text+

Adjust the contrast pot on the backpack. If still blank, change 0x27 to 0x3F.

Beeps constantly at power-up+

Low-triggered module: invert the logic in setBuzzer().

LED never lights+

LED is reversed; flip it. Check the 220 Ω resistor is in series.

Nothing happens after uploading+

Open the Serial Monitor at 115200 baud and check for messages. Make sure you chose the right board and port in the Arduino IDE.

Upload fails+

Close other programs using the serial port, try another USB cable (some are charge-only) and press reset just before uploading.

FAQ

What is the HYSTERESIS setting for?+

It stops the output flickering on and off when the reading hovers right at the limit. The output switches on at ALERT_LEVEL and only switches off once the reading has moved back by the hysteresis amount.

Can I use an ESP32 instead of the Arduino?+

Yes. Most of the code works unchanged on an ESP32 with the ESP32 board package. Watch for 5 V modules: ESP32 pins are 3.3 V, so 5 V output signals need a resistor divider. Analog readings run 0–4095 instead of 0–1023, which the ADC_MAX constant handles.

How do I power it without a computer?+

Use a 5 V USB phone charger or a power bank into the board's USB port.

What parts do I need to build the school lab gas leak alarm?+

8 parts: Nano CH340 Development Board (Soldered), MQ-6 Propane Isobutane LPG Gas Sensor Module, LCD1602 16x2 Character LCD (blue, with I2C adapter), Active Buzzer Module 3.3–5V, Through-Hole LED Pack (Pack of 10), Resistor Assortment Kit (30 Values), Solderless Breadboard (830 points) and Dupont Jumper Wires (40 pcs). Tools: Digital Multimeter and Wire Stripper and Cutter. On this page you can tick the parts you already have and add only the rest to your cart.

How hard is it and how long does it take?+

It is a beginner project and takes about 1 hour. The build on this page has 9 steps.

Do I need to write the code myself?+

No. This page has the complete, tested code (school_lab_gas_leak_alarm.ino). Install this library first: LiquidCrystal I2C.

Can I see what the code does before I build it?+

Yes. The Run it panel under the code runs this exact sketch on a simulated board. Move the sliders or press the buttons for the sensors it reads, and the Serial monitor, display and outputs react as they will on the real build. It is a simulation, so real readings depend on your parts and wiring.

How much does the school lab gas leak alarm cost to build?+

About ₹529 for the parts at the prices on this page, plus tools if you do not have them. Quantity price breaks lower the cost when you build several.

What will I learn from this project?+

Active vs passive buzzers; Analog sensors, ADCs and warm-up drift; Character displays and I²C backpacks; Current-limiting resistors for LEDs.

Is it safe to build?+

A learning and early-warning aid, not a certified detector. Never rely on this build alone. If the alarm sounds, ventilate, keep flames and switches away and shut the gas at the main valve. This is a learning project, not a certified gas or smoke alarm. Keep a certified alarm installed.

What can I build next with these parts?+

Ideas that reuse this build: Camping stove butane alarm and Gas leak alarm. They are listed under Take it further on this page.

Take it further

  • Camping stove butane alarm
  • Gas leak alarm

Related projects

  • UNO
    Sensor
    Beginner· 1 hour

    LPG gas leak alarm

    A kitchen gas sniffer that beeps and flashes the moment LPG levels climb.

    ₹505 · 8 partsArduino
  • NANO
    Sensor
    Beginner· 1–2 hours

    Smoke alarm with OLED readout

    See the smoke level live on a crisp screen and get a loud warning when it spikes.

    ₹539 · 6 partsArduino
  • UNO
    Sensor
    Beginner· 45 minutes

    Flame detector fire alarm

    An infrared eye that spots an open flame and raises the alarm.

    ₹434 · 8 partsArduino
  • UNO
    Sensor
    Beginner· 1 hour

    PIR intruder alarm

    Walk into the room and it sounds the alarm: the classic first security build.

    ₹459 · 8 partsArduino

Learning project. Check every circuit and the datasheet of each part before you power it up.

Run itChange the inputs and watch the output
Butane 29%
Warming up
Active buzzer (D2) silent
Red LED (D3) OFF
Serial monitor115200 baud
Butane=29%, status=Warming up
Butane=29%, status=Warming up

A simulation of the sketch above, so you know what to expect. Real readings vary with your parts and wiring.

Ask the Community

Ask a question Share your build