Same-day dispatch before 2 PM · Free delivery over ₹999 · GST invoices Get the appPrices incl. GST
Geekobot
Snap & SendNEWGeeko AIWhere's myOrder
Log in
Products
  • Projects
    • Component guidesHow parts work, with code you can run
    • Learning pathsFrom your first LED to your first robot
    • Workshops & eventsOnline sessions for makers and classes
    • ElectrolarkFree guided builds, simulator and certificates
    • Students & teachersStudent discount and classroom help
    • CommunityShare builds and ask other makers
    • CalculatorsOhm's law, LED resistor, 555 and 100+ more
    • Circuit builderWire parts and run the circuit, powered by Electrolark
    • Geeko AIAsk what to buy or how to wire it
    • Snap & SendPhotograph a part or list, we find it
    • Part finderAnswer a few questions, get the right part
    • Compatibility checkWill these two parts work together?
    • Compare partsSpecs side by side
    • Business & bulk ordersGST invoices, credit and volume prices
    • Request a quotationSend your list, get a quote
    • Classroom kitsPer-student kits and lab bundles
    • Gift cardsFor students, teams and events
  • Atal Tinkering Lab
BOM to cart
Geekobot

Components, kits and know-how for makers, students, engineers, labs and businesses across India.

Ask Geeko AIOrders, parts and projects, any timeEmail supportReply within 1 working dayGet the Geekobot appAdd it to your home screen, free

Follow us

Shop

  • Boards & SBCs
  • Sensors & Modules
  • IoT & Wireless
  • Drone & FPV
  • 3D Printing
  • Filaments & Resins
  • Motors & Drivers
  • Power & Batteries
  • Semiconductors
  • Passive
  • Displays & LEDs
  • Switches & Relays
  • Wires & Cables
  • Prototyping
  • Tools & Test
  • Robotics
  • STEM Kits
  • Atal Tinkering Lab
  • Mechanical Parts
  • Audio

Orders

  • Track your order
  • Help & support
  • Shipping and delivery
  • Refunds and cancellation
  • Contact us

Learn

  • Projects
  • Geeko AI project assistant
  • Learning paths
  • Guides
  • Calculators
  • Electrolark: free guided builds

Part tools

  • Part finder
  • Compare parts
  • Will it work with my board?

Institutions

  • Classroom kits
  • Atal Tinkering Lab
  • Students & teachers
  • Workshops & Events

Business

  • Business & education
  • Request a quotation
  • BOM bulk upload
  • Quick order by SKU

Company

  • About Geekobot
  • Community
  • Gift cards
  • Terms & conditions
  • Privacy policy
  • Product directory
  • Sitemap

© 2026 Geekobot, a trade name of OLatus Systems Private Limited. All rights reserved.

20, 1st Floor, Neeladri Complex, 10th Cross, Sampige Rd, 2nd Main, Malleshwaram, Bengaluru, Karnataka 560003 · GSTIN 29AACCO0462F1ZM

+91 91810 15607 · connect@geekobot.in · Monday to Saturday, 10 AM to 2 PM IST

UPI · CARDS · NETBANKING · GST INVOICES

ShopProjectsGeeko AIGuides
Compare 0 parts →
Log in

Shop by category

Shop all components
  • Boards & SBCs1,910 products
    • Alternative Single Board Computers
    • Arduino Ecosystem
    • FPGA & Logic Boards
    • Microcontroller & Wireless Boards
    View all
  • Sensors & Modules4,701 products
    • Biomedical & Heart Rate
    • Current, Voltage & Power
    • Force, Weight & Pressure
    • Gas, Weather & Environmental
    View all
  • IoT & Wireless2,314 products
    • RF Modules
    • RFID & NFC
    • Antennas & RF Accessories
    • Cameras & Smart Vision
    View all
  • Drone & FPV3,558 products
    • Flight Control & Navigation
    • FPV Video & Optics
    • Frames & Structural Parts
    • Motors & Propulsion
    View all
  • 3D Printing2,204 products
    • 3D Printers
    • 3D Scanners & Digitizers
    • Laser Engravers & Cutters
    • Material Management & Upgrades
    View all
  • Filaments & Resins1,472 products
    • Filaments
    • Photopolymer Resins
    View all
  • Motors & Drivers463 products
    • BLDC Motor Drivers
    • DC & Geared Motors
    • DC Motor Drivers
    • Linear Actuators & Solenoids
    View all
  • Power & Batteries557 products
    • Battery Holders & Connectors
    • Breadboard Power
    • Chargers & BMS
    • DC-DC Converters
    View all
  • Semiconductors295 products
    • Diodes & Rectifiers
    • Interface & RF Encoder ICs
    • Logic ICs (74xx)
    • Logic ICs (CD4000)
    View all
  • Passive67 products
    • Capacitors
    • Circuit Protection
    • Crystals & Oscillators
    • Inductors
    View all
  • Displays & LEDs572 products
    • 7-Segment & Dot Matrix
    • Addressable LEDs
    • Character LCDs
    • Graphic LCDs
    View all
  • Switches & Relays184 products
    • Keypads & Touch
    • Push Buttons & Tactile
    • Relay Modules
    • Relays
    View all
  • Wires & Cables233 products
    • Board-to-Wire Connectors
    • Crimp & Splice
    • Headers & Dupont
    • Heat Shrink & Sleeving
    View all
  • Prototyping101 products
    • Breadboards
    • Interface Modules
    • PCBs & Perfboards
    View all
  • Tools & Test717 products
    • Bench Power Supplies
    • Hand Tools
    • Measuring Tools
    • Meters & Testers
    View all
  • Robotics180 products
    • Humanoid & Legged Robots
    • Robot Chassis & Platforms
    • Robotic Arms & Grippers
    • Wheels & Casters
    View all
  • STEM Kits268 products
    • Arduino Learning Kits
    • Coding & IoT Kits
    • Early Coding (Ages 3-8)
    • Invention Kits
    View all
  • Atal Tinkering Lab196 products
    • Package 1: Electronics, Robotics, IoT and Sensors
    • Package 2: Rapid Prototyping Tools
    • Package 3: Mechanical, Electrical and Measurement Tools
    • Package 4: Power Supply, Accessories and Safety Equipment
    View all
  • Mechanical Parts212 products
    • Bearings
    • Brackets & Mounts
    • Couplers
    • Fasteners & Standoffs
    View all
  • Audio109 products
    • Amplifier Modules
    • Buzzers & Sirens
    • Speakers
    View all
  1. Home
  2. ›Projects
  3. ›Weather logger

Sensor projects

Terrace weather station logger

Writes temperature, humidity, pressure, light and UV to an SD card every minute, with the time.

By Geekobot Learning Team

Advanced
Difficulty
4–5 hours
Build time
₹1,799
Parts cost
10
Parts
Arduino
Platform
Add all parts · ₹1,799Start building
  • Weather & environment
  • Learning & classroom
  • Garden & agriculture
NANO
Tap a part to see what it does
OverviewPartsWiringBuildCodeTroubleshootFAQIdeas

What you'll build

A year-round weather record for a school terrace or a garden: four sensors, one clock and one SD card. Open the CSV file in a spreadsheet to plot the day, compare months and see how the monsoon changes the numbers.

What you'll learn

  • Converting a voltage to a physical unit
  • Digital sensors and accuracy versus price
  • Lux, lumens and the I²C bus
  • Real-time clocks and backup batteries
  • SPI devices and CSV logging
Safety

A learning and comparison aid, not a certified instrument.

  1. SenseAHT10 temperature and humidity, BMP280, BH1750 light sensor, GUVA-S12SD UV sensor
  2. ThinkArduino Nano runs the sketch
  3. ActDS3231 RTC, microSD module

Parts list

Tick anything you already have and the total updates.

PartQtyPrice
  • NANO
    Nano CH340 Development Board (Soldered)
    GB-SBCD-0339Guide

    The brain of the project

    Works with the same pins and code as the original Arduino Nano.

    × 1₹185₹185
  • AHT10 High Precision Digital Temperature & Humidity Sensor Module – I2C Interface
    SENS-3467

    Small digital sensor for air temperature (±0.3 °C) and humidity (±2 %) over I²C, more accurate than the common DHT11.

    × 1₹84₹84
  • BMP280 Temperature & Barometric Pressure Sensor Module
    SENS-3413

    Measures barometric pressure (±1 hPa) and temperature over I²C.

    × 1₹87₹87
  • GY-302 BH1750 Light Intensity Module – I2C Interface
    SENS-3278

    Digital light sensor that reports brightness in lux, the same unit used for room and street lighting.

    × 1₹121₹121
  • GUVA-S12SD UV Sensor Module
    SENS-3284

    UV photodiode for 240–370 nm.

    × 1₹219₹219
  • DS3231 Precision RTC Module with EEPROM
    GB-PROT-0005Guide

    Temperature-compensated real-time clock (±2 minutes a year) with a coin-cell backup, so the time survives power cuts.

    × 1₹125₹125
  • DFRobot Fermion MicroSD Card Module – SPI
    SENS-2961

    Stores readings on a microSD card as a CSV file you can open in Excel or Google Sheets.

    × 1₹499₹499
  • SD
    microSD Memory Card Class 10 (16GB)
    GB-PROT-0019-02

    Stores the CSV log (format as FAT32)

    × 1₹412₹412
  • Solderless Breadboard (830 points)
    GB-PROT-0001Guide

    Holds everything together without soldering

    × 1₹18₹18
  • Dupont Jumper Wires (40 pcs)
    GB-WIRE-0001Guide

    Connects the parts

    × 1₹49₹49

Complete kit

10 of 10 parts in one tap

₹1,799

GST included

3% off these parts while the whole kit stays in your cart

Parts you still need

₹1,799

10 of 10 parts. Tick anything you already have.

About ₹53,970 before bulk pricing for 30 kits.

Request bulk quote

Tools you'll need

  • Digital Multimeter
  • Wire Stripper and Cutter

Learn the parts

  • ESP32 vs Arduino Uno
  • I2C Explained
  • Arduino Uno

Calculators for this build

  • I²C pull-up resistor calculator
  • Pressure converter: bar, psi, kPa

Wiring

Follow the colours: red is power, dark grey is ground, blue is a signal.

PartPinConnect toNote
AHT10 temperature and humidityVCC5V
AHT10 temperature and humidityGNDGND
AHT10 temperature and humiditySCLA5
AHT10 temperature and humiditySDAA4
BMP280VCC5V
BMP280GNDGND
BMP280SCLA5
BMP280SDAA4
BH1750 light sensorVCC5V
BH1750 light sensorGNDGND
BH1750 light sensorSCLA5
BH1750 light sensorSDAA4
GUVA-S12SD UV sensorVCC5V
GUVA-S12SD UV sensorGNDGND
GUVA-S12SD UV sensorSIGA0
DS3231 RTCVCC5V
DS3231 RTCGNDGND
DS3231 RTCSDAA4
DS3231 RTCSCLA5
microSD moduleVCC5V
microSD moduleGNDGND
microSD moduleMOSID11
microSD moduleMISOD12
microSD moduleSCKD13
microSD moduleCSD10
  • AHT10 temperature and humidityVCC → 5V
  • AHT10 temperature and humidityGND → GND
  • AHT10 temperature and humiditySCL → A5
  • AHT10 temperature and humiditySDA → A4
  • BMP280VCC → 5V
  • BMP280GND → GND
  • BMP280SCL → A5
  • BMP280SDA → A4
  • BH1750 light sensorVCC → 5V
  • BH1750 light sensorGND → GND
  • BH1750 light sensorSCL → A5
  • BH1750 light sensorSDA → A4
  • GUVA-S12SD UV sensorVCC → 5V
  • GUVA-S12SD UV sensorGND → GND
  • GUVA-S12SD UV sensorSIG → A0
  • DS3231 RTCVCC → 5V
  • DS3231 RTCGND → GND
  • DS3231 RTCSDA → A4
  • DS3231 RTCSCL → A5
  • microSD moduleVCC → 5V
  • microSD moduleGND → GND
  • microSD moduleMOSI → D11
  • microSD moduleMISO → D12
  • microSD moduleSCK → D13
  • microSD moduleCS → D10
Built it? Check your wiring before you power up.Pick the pin each wire went to and we'll point out swapped pins, power mistakes and pins that clash.

Step-by-step build

0 of 12 done

Code

terrace_weather_station_logger.inoVerify & upload in Electrolark
// Terrace weather station logger
// Geekobot project library · board: Arduino Nano
// Wiring diagram, parts list and build steps: Geekobot project page "terrace-weather-station-logger"

#include <Wire.h>
#include <Adafruit_AHTX0.h>
#include <Adafruit_BMP280.h>
#include <BH1750.h>
#include <RTClib.h>
#include <SPI.h>
#include <SD.h>

// ---- pins ----
const uint8_t UV_PIN = A0;
const uint8_t SD_CS = 10;

const int ADC_MAX = 1023;      // 10-bit analog input
const float VREF = 5.0f;

Adafruit_AHTX0 aht;
sensors_event_t ahtH, ahtT;
Adafruit_BMP280 bmp;
BH1750 lightMeter;
RTC_DS3231 rtc;

// ---- latest readings ----
float tempC = 0;
float humidity = 0;
float pressHpa = 0;
float bmpC = 0;
float lux = 0;
float uvIndex = 0;

const unsigned long LOG_EVERY_MS = 60000UL;   // one row per minute
unsigned long lastLog = 0;
bool cardOk = false;

void readAht() { aht.getEvent(&ahtH, &ahtT); }

void writeRow() {
  File f = SD.open("LOG.CSV", FILE_WRITE);
  if (!f) { Serial.println(F("Write failed")); return; }
  DateTime t = rtc.now();
  char stamp[20];
  snprintf(stamp, sizeof(stamp), "%04d-%02d-%02d,%02d:%02d:%02d", t.year(), t.month(), t.day(), t.hour(), t.minute(), t.second());
  f.print(stamp);
  f.print(',');
  f.print(tempC, 1);
  f.print(',');
  f.print(humidity, 0);
  f.print(',');
  f.print(pressHpa, 1);
  f.print(',');
  f.print(bmpC, 1);
  f.print(',');
  f.print(lux, 0);
  f.print(',');
  f.print(uvIndex, 1);
  f.println();
  f.close();
}

void setup() {
  Serial.begin(115200);
  if (!aht.begin()) Serial.println(F("AHT10 not found"));
  if (!bmp.begin(0x76) && !bmp.begin(0x77)) Serial.println(F("BMP280 not found"));
  Wire.begin();
  if (!lightMeter.begin()) Serial.println(F("BH1750 not found"));
  if (!rtc.begin()) Serial.println(F("RTC not found"));
  if (rtc.lostPower()) rtc.adjust(DateTime(F(__DATE__), F(__TIME__)));   // set from the upload time
  cardOk = SD.begin(SD_CS);
  Serial.println(cardOk ? F("SD card ready") : F("SD card not found"));
  if (cardOk && !SD.exists("LOG.CSV")) {
  File f = SD.open("LOG.CSV", FILE_WRITE);
  if (f) { f.println(F("date,time,Temp(C),Humidity(%),Pressure(hPa),Temp(C),Light(lx),UV index")); f.close(); }
  }
}

void loop() {
  if (millis() - lastLog < LOG_EVERY_MS && lastLog != 0) return;
  lastLog = millis();
  tempC = (readAht(), ahtT.temperature);
  humidity = ahtH.relative_humidity;
  pressHpa = bmp.readPressure() / 100.0f;
  bmpC = bmp.readTemperature();
  lux = lightMeter.readLightLevel();
  uvIndex = analogRead(UV_PIN) * VREF / ADC_MAX / 0.1f;
  Serial.print(F("Temp="));
  Serial.print(tempC, 1);
  Serial.print(F("C"));
  Serial.print(F(", Humidity="));
  Serial.print(humidity, 0);
  Serial.print(F("%"));
  Serial.print(F(", Pressure="));
  Serial.print(pressHpa, 1);
  Serial.print(F("hPa"));
  Serial.print(F(", Temp="));
  Serial.print(bmpC, 1);
  Serial.print(F("C"));
  Serial.print(F(", Light="));
  Serial.print(lux, 0);
  Serial.print(F("lx"));
  Serial.print(F(", UV index="));
  Serial.print(uvIndex, 1);
  Serial.println();
  if (cardOk) writeRow();
}

Run it: what this code does

The sketch above runs here on a simulated Arduino Nano. Move the sliders for the sensors and buttons it reads, and watch the Serial monitor, display and outputs change.

Troubleshooting

"AHT10 not found"+

Check SDA and SCL are not swapped and that the module has 3.3 V or 5 V. An I²C scanner should show 0x38.

Humidity stuck at 100 %+

Moisture has condensed on the sensor. Dry it in warm air for an hour and keep it out of direct spray.

"BMP280 not found"+

Check SDA/SCL are not swapped. Run an I²C scanner sketch to confirm the address.

"BH1750 not found"+

Check SDA and SCL are not swapped. An I²C scanner should show 0x23 (0x5C if the ADDR pin is tied high).

Reads -1 or 0 in daylight+

Check the wiring and power, then try again. A reading of 0 in a dark room is normal.

Always near 0 indoors+

Expected. Take it outside in daylight.

Time resets after power-off+

The coin cell is flat or missing. Some modules need the charging resistor removed when using a CR2032.

"SD card not found"+

Check the card is FAT32, fully inserted, and CS is on the pin in the sketch.

Nothing happens after uploading+

Open the Serial Monitor at 115200 baud and check for messages. Make sure you chose the right board and port in the Arduino IDE.

Upload fails+

Close other programs using the serial port, try another USB cable (some are charge-only) and press reset just before uploading.

FAQ

Can I use an ESP32 instead of the Arduino?+

Yes. Most of the code works unchanged on an ESP32 with the ESP32 board package. Watch for 5 V modules: ESP32 pins are 3.3 V, so 5 V output signals need a resistor divider. Analog readings run 0–4095 instead of 0–1023, which the ADC_MAX constant handles.

How do I power it without a computer?+

Use a 5 V USB phone charger or a power bank into the board's USB port.

What parts do I need to build the terrace weather station logger?+

10 parts: Nano CH340 Development Board (Soldered), AHT10 High Precision Digital Temperature & Humidity Sensor Module – I2C Interface, BMP280 Temperature & Barometric Pressure Sensor Module, GY-302 BH1750 Light Intensity Module – I2C Interface, GUVA-S12SD UV Sensor Module, DS3231 Precision RTC Module with EEPROM, DFRobot Fermion MicroSD Card Module – SPI, microSD Memory Card Class 10 (16GB), Solderless Breadboard (830 points) and Dupont Jumper Wires (40 pcs). Tools: Digital Multimeter and Wire Stripper and Cutter. On this page you can tick the parts you already have and add only the rest to your cart.

How hard is it and how long does it take?+

It is a advanced project and takes about 4–5 hours. The build on this page has 12 steps.

Do I need to write the code myself?+

No. This page has the complete, tested code (terrace_weather_station_logger.ino). Install these libraries first: Adafruit AHTX0, Adafruit BMP280 Library, BH1750, RTClib and SD.

Can I see what the code does before I build it?+

Yes. The Run it panel under the code runs this exact sketch on a simulated board. Move the sliders or press the buttons for the sensors it reads, and the Serial monitor, display and outputs react as they will on the real build. It is a simulation, so real readings depend on your parts and wiring.

How much does the terrace weather station logger cost to build?+

About ₹1,799 for the parts at the prices on this page, plus tools if you do not have them. Quantity price breaks lower the cost when you build several.

What will I learn from this project?+

Converting a voltage to a physical unit; Digital sensors and accuracy versus price; Lux, lumens and the I²C bus; Real-time clocks and backup batteries; SPI devices and CSV logging.

Is it safe to build?+

A learning and comparison aid, not a certified instrument.

What can I build next with these parts?+

Ideas that reuse this build: Balcony weather pressure logger and UV exposure logger. They are listed under Take it further on this page.

Take it further

  • Balcony weather pressure logger
  • UV exposure logger

Related projects

  • UNO
    Sensor
    Beginner· 1 hour

    LPG gas leak alarm

    A kitchen gas sniffer that beeps and flashes the moment LPG levels climb.

    ₹505 · 8 partsArduino
  • NANO
    Sensor
    Beginner· 1–2 hours

    Smoke alarm with OLED readout

    See the smoke level live on a crisp screen and get a loud warning when it spikes.

    ₹539 · 6 partsArduino
  • UNO
    Sensor
    Beginner· 45 minutes

    Flame detector fire alarm

    An infrared eye that spots an open flame and raises the alarm.

    ₹434 · 8 partsArduino
  • UNO
    Sensor
    Beginner· 1 hour

    PIR intruder alarm

    Walk into the room and it sounds the alarm: the classic first security build.

    ₹459 · 8 partsArduino

Learning project. Check every circuit and the datasheet of each part before you power it up.

Run itChange the inputs and watch the output
2026-11-06,09:30:00,26.0,55,1008.0,25.9,321,15.1microSD card: LOG.CSV, 9 lines
Serial monitor115200 baud
lx, UV index=15.1
Temp=26.1C, Humidity=55%, Pressure=1007.9hPa, Temp=26.0C, Light=321lx, UV index=15.0
Temp=26.0C, Humidity=55%, Pressure=1008.0hPa, Temp=25.9C, Light=321lx, UV index=15.1

A simulation of the sketch above, so you know what to expect. Real readings vary with your parts and wiring.

Ask the Community

Ask a question Share your build