Shop by category
Shop all componentsAnalog circuits
Power: dB = 10 × log10(P2 ÷ P1)Voltage: dB = 20 × log10(V2 ÷ V1)dBm = 10 × log10(P ÷ 1 mW)20 dBm = 10^(20/10) = 100 mW, the maximum for 2.4 GHz Wi-Fi in many regions. +3 dB doubles the power; +6 dB doubles the voltage.
Decibels express ratios on a log scale, so large ranges become easy numbers to add and subtract. Amplifier gains, cable losses and antenna gains along a signal chain simply add up in dB.
dBm is power relative to one milliwatt, used on every RF module datasheet: ESP32 transmits up to about 20 dBm, and LoRa radios hear signals down to −130 dBm or below.
P (mW) = 10^(dBm ÷ 10). 0 dBm is 1 mW, 10 dBm is 10 mW and 20 dBm is 100 mW.
Power is proportional to voltage squared, so the same ratio in decibels needs 20 × log10 for voltage.
About double the power. +10 dB is ten times the power.
Power: dB = 10 × log10(P2 ÷ P1); Voltage: dB = 20 × log10(V2 ÷ V1); dBm = 10 × log10(P ÷ 1 mW).
20 dBm = 10^(20/10) = 100 mW, the maximum for 2.4 GHz Wi-Fi in many regions. +3 dB doubles the power; +6 dB doubles the voltage.
Results are estimates for design and learning. Check critical designs against the component datasheet. Made by the Geekobot Learning Team. How we write our calculators