Shop by category
Shop all componentsComponent codes & values
4 bands: [digit][digit] × multiplier, tolerance5 bands: [digit][digit][digit] × multiplier, tolerance6 bands: 5 bands + temperature coefficientYellow, violet, red, gold = 4, 7, ×100 = 4700 Ω = 4.7 kΩ ±5%. Brown, black, black, red, brown (5-band) = 100 × 100 = 10 kΩ ±1%.
Through-hole resistors are too small to print numbers on, so their value is painted as coloured bands. Read from the end where the bands are bunched together; the tolerance band (often gold or silver) sits apart on the other end.
4-band resistors are usually ±5% carbon film parts with two significant digits. 5-band resistors are precision metal film parts (±1% or better) with three digits. A sixth band gives the temperature coefficient, how much the value drifts per degree. If in doubt, measure with a multimeter.
Black, brown, red, orange, yellow, green, blue, violet, grey, white run 0 to 9, the same order as a rainbow after the dark colours.
Start from the band closest to a lead. Gold and silver are never the first band.
As the last band it means ±5 % tolerance. As the multiplier band it means ×0.1, used for values below 10 Ω.
Yes. "Color" is the US spelling and "colour" the British and Indian spelling; the bands, digits and multipliers are identical. This calculator decodes 4, 5 and 6-band resistors in either case.
4 bands: [digit][digit] × multiplier, tolerance; 5 bands: [digit][digit][digit] × multiplier, tolerance; 6 bands: 5 bands + temperature coefficient. Here 0 Black is 1 Brown · 2 Red · 3 Orange, 4 Yellow is 5 Green · 6 Blue · 7 Violet and 8 Grey is 9 White · ×0.1 Gold · ×0.01 Silver.
Yellow, violet, red, gold = 4, 7, ×100 = 4700 Ω = 4.7 kΩ ±5%. Brown, black, black, red, brown (5-band) = 100 × 100 = 10 kΩ ±1%.
Geekobot builds that use it include Wi-Fi fridge thermometer, Battery voltage tester with a 7-segment display, Battery charge level ring and Wi-Fi fridge temperature monitor. Each has the full parts list, wiring and code.
Results are estimates for design and learning. Check critical designs against the component datasheet. Made by the Geekobot Learning Team. How we write our calculators