Shop by category
Shop all componentsComponent codes & values
Colour-banded inductors use the resistor colour code, read in µH.
Code ABC = AB × 10^C microhenriesR = decimal point in µH: 4R7 = 4.7 µHN = decimal point in nH: 4N7 = 4.7 nH101 = 10 × 10¹ = 100 µH. 4R7 = 4.7 µH. 220 = 22 µH. 47N = 47 nH.
Small inductors follow the same idea as capacitor codes, but the base unit is the microhenry. Power inductors for buck converters are usually printed this way, and the code is all you need to replace a burnt one, together with the current rating and size.
When you replace a power inductor, match the inductance, the saturation current and the DC resistance. An inductor that saturates loses its inductance and can destroy a switching regulator.
10 followed by 1 zero in microhenries: 100 µH.
R marks the decimal point in microhenries, so 4R7 is 4.7 µH.
No. The code only gives inductance. Check the datasheet for saturation and RMS current, which matter more in a power circuit.
Code ABC = AB × 10^C microhenries; R = decimal point in µH: 4R7 = 4.7 µH; N = decimal point in nH: 4N7 = 4.7 nH.
101 = 10 × 10¹ = 100 µH. 4R7 = 4.7 µH. 220 = 22 µH. 47N = 47 nH.
Geekobot builds that use it include Dashboard battery voltmeter for cars and bikes, Car cabin air-quality meter, Two-wheeler side-stand warning and Solder a fused 12 V to 5 V power board on stripboard. Each has the full parts list, wiring and code.
Results are estimates for design and learning. Check critical designs against the component datasheet. Made by the Geekobot Learning Team. How we write our calculators