Pinout reference · Beginner · 4 min read
Resistor Colour Code Chart
4-Band, 5-Band and 6-Band
By Geekobot Learning Team · Updated 24 Oct 2026
On this page
Read a resistor from the end where the bands are closest together, with the gold or silver tolerance band on the right. On a 4-band resistor the first two bands are digits and the third is the multiplier: brown-black-red-gold is 1, 0, x100 = 1 kΩ ±5%. On a 5-band resistor the first three bands are digits and the fourth is the multiplier.
Key specs at a glance
- 4-band
- Digit, digit, multiplier, tolerance
- 5-band
- Digit, digit, digit, multiplier, tolerance (1% metal film)
- 6-band
- As 5-band plus temperature coefficient
- Tolerance
- Gold ±5%, silver ±10%, brown ±1%, red ±2%, none ±20%
- Multiplier shortcuts
- Red = x100, orange = x1k, yellow = x10k, gold = x0.1
- Standard values
- E12 and E24 series
Resistor colour code chart
| Colour | 1st / 2nd / 3rd digit | Multiplier | Tolerance | Temp. coefficient |
|---|---|---|---|---|
| Black | 0 | x1 | 250 ppm/K | |
| Brown | 1 | x10 | ±1% | 100 ppm/K |
| Red | 2 | x100 | ±2% | 50 ppm/K |
| Orange | 3 | x1,000 | 15 ppm/K | |
| Yellow | 4 | x10,000 | 25 ppm/K | |
| Green | 5 | x100,000 | ±0.5% | 20 ppm/K |
| Blue | 6 | x1,000,000 | ±0.25% | 10 ppm/K |
| Violet | 7 | x10,000,000 | ±0.1% | 5 ppm/K |
| Grey | 8 | x100,000,000 | ±0.05% | 1 ppm/K |
| White | 9 | x1,000,000,000 | ||
| Gold | x0.1 | ±5% | ||
| Silver | x0.01 | ±10% |
- Black
- 1st / 2nd / 3rd digit:
- 0
- Multiplier:
- x1
- Temp. coefficient:
- 250 ppm/K
- Brown
- 1st / 2nd / 3rd digit:
- 1
- Multiplier:
- x10
- Tolerance:
- ±1%
- Temp. coefficient:
- 100 ppm/K
- Red
- 1st / 2nd / 3rd digit:
- 2
- Multiplier:
- x100
- Tolerance:
- ±2%
- Temp. coefficient:
- 50 ppm/K
- Orange
- 1st / 2nd / 3rd digit:
- 3
- Multiplier:
- x1,000
- Temp. coefficient:
- 15 ppm/K
- Yellow
- 1st / 2nd / 3rd digit:
- 4
- Multiplier:
- x10,000
- Temp. coefficient:
- 25 ppm/K
- Green
- 1st / 2nd / 3rd digit:
- 5
- Multiplier:
- x100,000
- Tolerance:
- ±0.5%
- Temp. coefficient:
- 20 ppm/K
- Blue
- 1st / 2nd / 3rd digit:
- 6
- Multiplier:
- x1,000,000
- Tolerance:
- ±0.25%
- Temp. coefficient:
- 10 ppm/K
- Violet
- 1st / 2nd / 3rd digit:
- 7
- Multiplier:
- x10,000,000
- Tolerance:
- ±0.1%
- Temp. coefficient:
- 5 ppm/K
- Grey
- 1st / 2nd / 3rd digit:
- 8
- Multiplier:
- x100,000,000
- Tolerance:
- ±0.05%
- Temp. coefficient:
- 1 ppm/K
- White
- 1st / 2nd / 3rd digit:
- 9
- Multiplier:
- x1,000,000,000
- Gold
- Multiplier:
- x0.1
- Tolerance:
- ±5%
- Silver
- Multiplier:
- x0.01
- Tolerance:
- ±10%
How to read a resistor in four steps
- 1Find the start. The tolerance band (gold, silver or a lone band) sits apart from the others and goes on the right. The first band is usually nearer one end.
- 2Read the digits. Two bands on a 4-band resistor, three on a 5-band.
- 3Apply the multiplier. The next band says how many zeros to add (or, for gold and silver, to divide by 10 or 100).
- 4Note the tolerance. It tells you how far the real value may be from the marked value.
Mnemonic: Bad Beer Rots Our Young Guts But Vodka Goes Well (Black, Brown, Red, Orange, Yellow, Green, Blue, Violet, Grey, White).
Worked examples
| Bands | Reading | Value |
|---|---|---|
| Red, red, brown, gold | 2, 2, x10, 5% | 220 Ω ±5% |
| Orange, orange, brown, gold | 3, 3, x10 | 330 Ω |
| Brown, black, red, gold | 1, 0, x100 | 1 kΩ |
| Yellow, violet, red, gold | 4, 7, x100 | 4.7 kΩ |
| Brown, black, orange, gold | 1, 0, x1k | 10 kΩ |
| Brown, black, yellow, gold | 1, 0, x10k | 100 kΩ |
| Brown, black, green, gold | 1, 0, x100k | 1 MΩ |
| Green, blue, black, gold | 5, 6, x1 | 56 Ω |
| Brown, black, black, gold | 1, 0, x1 | 10 Ω |
| Yellow, violet, gold, gold | 4, 7, x0.1 | 4.7 Ω |
| Brown, black, black, red, brown (5-band) | 1, 0, 0, x100, 1% | 10 kΩ ±1% |
| Red, red, black, black, brown (5-band) | 2, 2, 0, x1 | 220 Ω ±1% |
- Red, red, brown, gold
- Reading:
- 2, 2, x10, 5%
- Value:
- 220 Ω ±5%
- Orange, orange, brown, gold
- Reading:
- 3, 3, x10
- Value:
- 330 Ω
- Brown, black, red, gold
- Reading:
- 1, 0, x100
- Value:
- 1 kΩ
- Yellow, violet, red, gold
- Reading:
- 4, 7, x100
- Value:
- 4.7 kΩ
- Brown, black, orange, gold
- Reading:
- 1, 0, x1k
- Value:
- 10 kΩ
- Brown, black, yellow, gold
- Reading:
- 1, 0, x10k
- Value:
- 100 kΩ
- Brown, black, green, gold
- Reading:
- 1, 0, x100k
- Value:
- 1 MΩ
- Green, blue, black, gold
- Reading:
- 5, 6, x1
- Value:
- 56 Ω
- Brown, black, black, gold
- Reading:
- 1, 0, x1
- Value:
- 10 Ω
- Yellow, violet, gold, gold
- Reading:
- 4, 7, x0.1
- Value:
- 4.7 Ω
- Brown, black, black, red, brown (5-band)
- Reading:
- 1, 0, 0, x100, 1%
- Value:
- 10 kΩ ±1%
- Red, red, black, black, brown (5-band)
- Reading:
- 2, 2, 0, x1
- Value:
- 220 Ω ±1%
4-band vs 5-band: why there is a third digit
Precision (1%) metal film resistors use three digit bands because the E96 series has values like 4.99 kΩ and 10.2 kΩ that need three significant figures. Beginners often read a 5-band resistor as a 4-band and get a value ten times too big: if the colours do not match a standard value, try reading it the other way or with the other band count. A multimeter settles any doubt.
Standard values: the E12 and E24 series
Resistors come in fixed steps so that tolerances overlap. E12 (10%): 10, 12, 15, 18, 22, 27, 33, 39, 47, 56, 68, 82 and their multiples. E24 (5%) adds 11, 13, 16, 20, 24, 30, 36, 43, 51, 62, 75, 91. When a calculation gives 200 Ω, buy 220 Ω (E12) or 200 Ω (E24 and E96); if the exact value matters, combine two in series or parallel.
SMD and other markings
Surface-mount resistors use printed codes: 103 = 10 x 10³ = 10 kΩ, 4R7 = 4.7 Ω, 01C (EIA-96) = 10 kΩ. Zero-ohm links are marked 0 or a single black band. Wire-wound power resistors print the value in text, such as 10R 5W. See the resistors guide for how to choose a value and power rating.
Try it: Resistor colour code calculator
Change the values and the diagram and results update as you type.
Common mistakes to avoid
- Reading from the wrong end so 220 Ω becomes 1.2 MΩ-ish nonsense.
- Treating a 5-band resistor as 4-band.
- Confusing red and orange, or brown and violet, under warm light. Use a white light or a multimeter.
- Assuming gold is always tolerance; as a third band it means x0.1.
- Forgetting that 5% tolerance can make a 10 kΩ part read 9.6 kΩ.
Frequently asked questions
How do I read a 4-band resistor colour code?
First two bands are digits, the third is the multiplier (number of zeros), and the fourth is tolerance. Red-red-brown-gold is 22 followed by one zero: 220 Ω, ±5%.
Which end of a resistor do I read from?
Start from the end where the bands are grouped closer together; the tolerance band (gold or silver) is on the other end, slightly separated.
What does a gold band mean on a resistor?
As the last band, ±5% tolerance. As the multiplier band it means divide by 10, so yellow-violet-gold is 4.7 Ω.
What is the colour code for a 10k resistor?
Brown, black, orange, gold on a 4-band resistor, or brown, black, black, red, brown on a 5-band 1% resistor.
What is the colour code for 220 ohm and 330 ohm?
220 Ω: red, red, brown, gold. 330 Ω: orange, orange, brown, gold.
Parts for this guide
Calculators
Terms in this guide
Keep learning
Sources
- IEC 60062:2016 marking codes for resistors and capacitors
- IEC 60063 preferred number series (E-series)
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.



