Component guide · Intermediate · 3 min read
A7672S and A7670 4G LTE Cat-1 Module

Wiring, AT Commands and Code
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
The SIMCom A7672S is a low-cost 4G LTE Cat-1 module with bands for India and Asia, so it works on Jio, Airtel and Vi where 2G modules do not. It sends SMS, makes VoLTE calls and moves data at up to 10 Mbps down using AT commands much like the SIM800. The A7670C and A7600C are versions for other regions, so check bands before buying for India.
Key specs at a glance
- Network
- LTE Cat-1 (10 Mbps down, 5 Mbps up); A7672S bands B1/B3/B5/B8/B40/B41 plus 2G fallback
- Voice
- VoLTE calls on supported networks
- Supply
- 3.4 to 4.2 V module; 5 V or 5 to 12 V on boards; 2 A peaks
- Interface
- UART AT commands, USB on some boards
- Logic
- 1.8 V module; boards add level shifting for 3.3 or 5 V
- Extras
- Industrial modem (Indsense) with RS485/RS232; A7672S + ESP32 board; M5Stack A7600C module
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1A7672S LTE Cat 1 GSM 4G Cellular Modem Module₹3,169
Option 2Indsense A7672S Modem Pro Industrial 4G LTE Cat-1 IoT Modem₹1,599
Option 3SIM A7670C 4G LTE Development Board w/ Flex Antenna₹1,859
Option 4SIMCom A7672S LTE Cat-1 4G Module with ESP32 WROOM₹3,391
Option 5M5Stack COM.LTE Data Module (A7600C CAT1 4G LTE)₹3,520
What the A7672S 4G LTE module is
Cat-1 is the right speed class for IoT: enough for MQTT, HTTP and small images, far cheaper and lower power than Cat-4. The A7672S also keeps a 2G fallback where 2G exists.
The A7672S + ESP32 board runs your code on the ESP32 and talks to the modem internally; the Indsense modem is an enclosed industrial unit you drive over RS485, RS232 or USB.
A7672S 4G LTE module pinout
The pins on the A7672S 4G LTE module and what each one does.
| Pin | Function |
|---|---|
| VIN / 5V | Board supply (2 A peaks) |
| GND | Ground |
| TXD / RXD | UART to the controller |
| PWRKEY | Pulse low about 1 s to turn on |
| NET / STATUS | Network and power LEDs |
| MAIN antenna | LTE antenna |
| USB (some boards) | PC or Raspberry Pi data and AT ports |
- VIN / 5V
- Board supply (2 A peaks)
- GND
- Ground
- TXD / RXD
- UART to the controller
- PWRKEY
- Pulse low about 1 s to turn on
- NET / STATUS
- Network and power LEDs
- MAIN antenna
- LTE antenna
- USB (some boards)
- PC or Raspberry Pi data and AT ports
Wiring the A7672S 4G LTE module
Check the board's logic level: the A7672S itself is 1.8 V and boards differ. An ESP32 at 115200 baud is the easiest controller; an Uno with SoftwareSerial needs the modem set to 9600 baud.
| A7672S 4G LTE module pin | Arduino Uno | ESP32 |
|---|---|---|
| VIN | External 5 V 2 A | External 5 V 2 A |
| GND | GND | GND |
| TXD | D2 (SoftwareSerial RX) | GPIO 16 |
| RXD | D3 (SoftwareSerial TX) | GPIO 17 |
| PWRKEY | D4 | GPIO 4 |
- VIN
- Arduino Uno:
- External 5 V 2 A
- ESP32:
- External 5 V 2 A
- GND
- Arduino Uno:
- GND
- ESP32:
- GND
- TXD
- Arduino Uno:
- D2 (SoftwareSerial RX)
- ESP32:
- GPIO 16
- RXD
- Arduino Uno:
- D3 (SoftwareSerial TX)
- ESP32:
- GPIO 17
- PWRKEY
- Arduino Uno:
- D4
- ESP32:
- GPIO 4
Example code
Set the APN for your SIM (jionet for Jio, airtelgprs.com for Airtel, www for Vi). TinyGSM supports the A7672 family for MQTT and HTTPS with Arduino Client APIs.
HardwareSerial modem(2);
void at(const char* c, int w = 800) { modem.println(c); delay(w); while (modem.available()) Serial.write(modem.read()); }
void setup() {
Serial.begin(115200);
modem.begin(115200, SERIAL_8N1, 16, 17);
delay(5000);
at("AT");
at("AT+CPIN?");
at("AT+CSQ");
at("AT+CEREG?"); // LTE registration
at("AT+CGDCONT=1,\"IP\",\"jionet\""); // your operator's APN
at("AT+CMGF=1");
modem.println("AT+CMGS=\"+91XXXXXXXXXX\""); delay(500);
modem.print("A7672S online"); modem.write(26); delay(5000);
at("AT+HTTPINIT");
at("AT+HTTPPARA=\"URL\",\"http://example.com\"");
at("AT+HTTPACTION=0", 5000); // GET
at("AT+HTTPREAD=0,200");
at("AT+HTTPTERM");
}
void loop() {}Setup and tuning
buy the A7672S for India; the A7670E and A7670C target Europe and China.
a 2 A supply and a large capacitor; brown-outs cause random resets.
fit the LTE antenna before power-up; indoors use an external antenna.
some boards need firmware updates for VoLTE on Indian networks.
What you need
Shop this list9 of 11 found in our store · ₹14,074
A7672S LTE Cat 1 GSM 4G Cellular Modem Module: the part this guide coversA7672S LTE Cat 1 GSM 4G Cellular Modem Module₹3,169
Indsense A7672S Modem Pro Industrial 4G LTE Cat-1 IoT Modem: another version this guide coversIndsense A7672S Modem Pro Industrial 4G LTE Cat-1 IoT Modem₹1,599
SIM A7670C 4G LTE Development Board w/ Flex Antenna: another version this guide coversSIM A7670C 4G LTE Development Board w/ Flex Antenna₹1,859
SIMCom A7672S LTE Cat-1 4G Module with ESP32 WROOM: another version this guide coversSIMCom A7672S LTE Cat-1 4G Module with ESP32 WROOM₹3,391
M5Stack COM.LTE Data Module (A7600C CAT1 4G LTE): another version this guide coversM5Stack COM.LTE Data Module (A7600C CAT1 4G LTE)₹3,520
ESP32-WROOM-32 38-pin development board: for Wi-Fi logging and dashboardsESP32-WROOM-32 38-Pin Development Board₹389- Uno R3 development board: the controller used in the wiring tableFind this part
- XL4015 5A buck converter: a supply that holds up during 2 A transmit burstsFind this part
Electrolytic capacitor: 1000 uF across the module supplyElectrolytic Capacitor₹16
GSM antenna with 1 m cable and SMA plug: for better signal than the stub antennaGSM Antenna SMA 5cm 900-1800MHz 2dBi₹46Closest match, check the specs
USB to TTL serial converter: to talk to the module from a PCUSB to TTL Serial Converter (CH340G / CP2102 / FT232RL / PL2303)₹85Closest match, check the specs
Alternatives and when to choose them
- 4G LTE modules: A7672 vs SIM7600 vs EC200U.
- SIM7600 4G module: faster Cat-4 with GNSS.
- EC200U 4G module: Quectel Cat-1 with GNSS.
Common mistakes to avoid
- Buying an A7670C or A7670E for Indian bands.
- Wrong APN, so data never connects.
- Weak supply.
- Connecting 5 V logic to a 1.8 V or 3.3 V board.
Frequently asked questions
Does the A7672S work with Jio?
Yes. It supports the LTE bands Jio uses.
Can it make voice calls?
Yes, VoLTE calls on networks and firmware that support it.
Is it compatible with SIM800 code?
Mostly for SMS. Data uses different HTTP and TCP commands.
Which library should I use?
TinyGSM with the A7672X modem type.
Does it have GPS?
The A7672S does not; choose an A7672S with GNSS variant, SIM7600 or EC200U for location.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.



