Component guide · Intermediate · 3 min read
Arduino UNO Q Accessories

52Pi Level-Shift Shield, Arduino USB-C Hub, Uno Media Carrier, JMO Professional Carrier and JMO 7 Inch MIPI Touch Display
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
The Arduino UNO Q pairs a Qualcomm Linux processor with an STM32 microcontroller on an Uno-sized board. Its accessories turn it into a small computer: the USB-C hub adds HDMI, USB and power so you can use a monitor and keyboard; the Media Carrier adds MIPI camera and display connectors; the level-shift shield makes its 3.3V pins safe for 5V shields.
Key specs at a glance
- USB-C hub
- HDMI out, USB-A ports, power pass-through
- Uno Media Carrier
- MIPI CSI camera and DSI display connectors
- Level-shift shield
- 3.3V to 5V on the Uno header
- JMO carrier
- Industrial-style breakout with screw terminals
- JMO 7 inch display
- MIPI DSI multi-touch IPS
- UNO Q logic
- 3.3V on the Uno header
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 152Pi Level-Shift Shield for Arduino UNO Q₹1,709
Option 2Arduino USB-C Hub TPX00241 for UNO Q₹1,799
Option 3Arduino Uno Media Carrier ASX00083₹2,359
Option 4JMO 7″ MIPI Multi-Touch IPS Display for Arduino UNO Q₹7,499
Option 5JMO Arduino UNO Q Professional Carrier Board₹5,399
What the Arduino UNO Q accessories (level-shift shield, USB-C hub, media and carrier boards, MIPI display) is
These accessories turn the Linux-and-microcontroller Arduino UNO Q into a small computer or an industrial board, adding display, camera, USB and 5 V level shifting.
The UNO Q has two halves: Linux apps run on the Qualcomm chip, and Arduino sketches run on the STM32 and talk to Linux through Arduino App Lab's bridge. The USB-C hub must supply enough power for both the board and attached devices; use a good USB-C PD charger.
Use the level-shift shield before stacking older 5V Arduino shields: the UNO Q's header is 3.3V.
Arduino UNO Q accessories (level-shift shield, USB-C hub, media and carrier boards, MIPI display) pinout
The pins on the Arduino UNO Q accessories (level-shift shield, USB-C hub, media and carrier boards, MIPI display) and what each one does.
| Pin | Function |
|---|---|
| Uno header | 3.3V logic |
| USB-C | Power, data and video through the hub |
| Bottom connectors | High-speed lines for the Media Carrier |
| Qwiic | On the UNO Q for Modulino |
| MIPI | On the Media Carrier |
- Uno header
- 3.3V logic
- USB-C
- Power, data and video through the hub
- Bottom connectors
- High-speed lines for the Media Carrier
- Qwiic
- On the UNO Q for Modulino
- MIPI
- On the Media Carrier
Wiring the Arduino UNO Q accessories (level-shift shield, USB-C hub, media and carrier boards, MIPI display)
Do not stack a 5V shield directly on the UNO Q. Use a PD charger of at least the rating the hub asks for.
| Arduino UNO Q accessories (level-shift shield, USB-C hub, media and carrier boards, MIPI display) pin | Connection | Note |
|---|---|---|
| Hub | USB-C of UNO Q | PD charger into the hub |
| Monitor | HDMI on the hub | Before boot |
| 5V shield | On top of the level-shift shield | Not directly |
- Hub
- Connection:
- USB-C of UNO Q
- Note:
- PD charger into the hub
- Monitor
- Connection:
- HDMI on the hub
- Note:
- Before boot
- 5V shield
- Connection:
- On top of the level-shift shield
- Note:
- Not directly
Example code
Create an App in Arduino App Lab to combine this sketch with a Python part on the Linux side.
// Runs on the STM32 microcontroller of the UNO Q
void setup() {
pinMode(LED_BUILTIN, OUTPUT);
}
void loop() {
digitalWrite(LED_BUILTIN, HIGH);
delay(300);
digitalWrite(LED_BUILTIN, LOW);
delay(300);
}Setup and tuning
use a powered hub with a 5 V 3 A supply for monitor, keyboard and mouse use.
use the 52Pi level-shift shield when connecting 5 V shields; the UNO Q header is 3.3 V.
connect MIPI cameras and displays through the Media Carrier with the cable seated firmly.
update the board image and use Arduino App Lab to run sketches and Linux apps together.
follow the JMO carrier's supply rating when powering industrial sensors from it.
What you need
Shop this list6 of 6 found in our store · ₹18,928
52Pi Level-Shift Shield for Arduino UNO Q: the part this guide covers52Pi Level-Shift Shield for Arduino UNO Q₹1,709
Arduino USB-C Hub TPX00241 for UNO Q: another version this guide coversArduino USB-C Hub TPX00241 for UNO Q₹1,799
Arduino Uno Media Carrier ASX00083: another version this guide coversArduino Uno Media Carrier ASX00083₹2,359
JMO 7″ MIPI Multi-Touch IPS Display for Arduino UNO Q: another version this guide coversJMO 7″ MIPI Multi-Touch IPS Display for Arduino UNO Q₹7,499
JMO Arduino UNO Q Professional Carrier Board: another version this guide coversJMO Arduino UNO Q Professional Carrier Board₹5,399
USB-C cable: for power and programmingUSB-C Power Cable with On/Off Switch for Raspberry Pi 4₹163
Alternatives and when to choose them
- Official Arduino boards: where UNO Q fits.
- Arduino Modulino modules: Qwiic add-ons.
- Arduino shields guide: shield basics.
Common mistakes to avoid
- Plugging 5 V shields onto the 3.3 V header.
- Using a weak charger that causes brownouts.
- Fitting the MIPI ribbon loosely or reversed.
- Skipping the board image update before using new accessories.
Frequently asked questions
Can I plug 5 V Uno shields into the UNO Q?
Not safely without the level-shift shield, because the UNO Q header is 3.3 V.
Do I need the USB-C hub to use the UNO Q?
Only to use it as a desktop with a monitor and keyboard; it also works headless over the network.
Which cameras work with the Media Carrier?
MIPI CSI cameras supported by the UNO Q image; check Arduino's compatibility list.
Can I use a normal phone charger?
Use a USB-C supply that gives a steady 5 V at 3 A for stable use with accessories.
What is the 7 inch display for?
It adds a touch screen over MIPI DSI for a kiosk or control panel.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.

