Comparison · Beginner · 3 min read
Official Arduino Boards Compared
Nano, MKR, GIGA, Portenta, Opta and UNO Q
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Beyond the classic UNO, official Arduino boards split into small Nano boards, MKR boards with wireless radios, powerful GIGA and Portenta boards, the Opta PLC and the UNO Q, which pairs a Linux processor with a microcontroller. Check the logic voltage (3.3 V on most, 5 V on Nano Every and UNO), the radios you need, and library support before choosing.
Key specs at a glance
- Nano family
- Small boards: Every (5 V), 33 IoT, 33 BLE/Sense, Matter
- MKR family
- 3.3 V boards for IoT: WiFi 1010, WAN 1310, NB 1500, Zero, Vidor
- High power
- GIGA R1 WiFi and Portenta H7/C33 (dual-core or Cortex-M33)
- Industrial
- Opta micro PLC, Portenta Machine Control
- Edge AI
- Nicla Voice/Sense ME, TinyML Kit, UNO Q
- Voltage
- Most are 3.3 V logic; Nano Every and UNO R3 are 5 V
Which board for which job
Use this as a short map.
| Board | Highlights | Good for |
|---|---|---|
| Nano Every | 5 V, ATmega4809, UNO-like code | Small 5 V projects, shield-free replacements for the Nano |
| Nano 33 IoT | SAMD21 with Wi-Fi and Bluetooth LE, 3.3 V | Simple connected sensors |
| Nano 33 BLE / Sense Rev2 | nRF52840, Bluetooth LE, built-in IMU and sensors | Wearables, gesture detection, TinyML |
| Nano Matter | Silicon Labs Matter board with Thread | Smart-home devices |
| MKR WiFi 1010 / WAN 1310 / NB 1500 | Wi-Fi, LoRa or NB-IoT on a 3.3 V board | IoT with the right radio |
| MKR Zero | I2S audio and SD slot | Sound and data logging |
| Due | 84 MHz Cortex-M3, 3.3 V, many pins | Fast loops and many I/O |
| GIGA R1 WiFi | Dual-core STM32H747 in a Mega layout, Wi-Fi and BLE | Large projects and displays |
| Portenta H7 / C33 | Industrial grade, dual-core or Cortex-M33 | Edge AI, gateways, motion control |
| Opta | Micro PLC with relays and DIN rail | Industrial control |
| Nicla Sense ME / Voice | Tiny sensor and voice boards | Wearables and edge AI |
| UNO Q | Linux processor plus STM32 MCU in UNO form | Vision, AI and robotics with a microcontroller |
- Nano Every
- Highlights:
- 5 V, ATmega4809, UNO-like code
- Good for:
- Small 5 V projects, shield-free replacements for the Nano
- Nano 33 IoT
- Highlights:
- SAMD21 with Wi-Fi and Bluetooth LE, 3.3 V
- Good for:
- Simple connected sensors
- Nano 33 BLE / Sense Rev2
- Highlights:
- nRF52840, Bluetooth LE, built-in IMU and sensors
- Good for:
- Wearables, gesture detection, TinyML
- Nano Matter
- Highlights:
- Silicon Labs Matter board with Thread
- Good for:
- Smart-home devices
- MKR WiFi 1010 / WAN 1310 / NB 1500
- Highlights:
- Wi-Fi, LoRa or NB-IoT on a 3.3 V board
- Good for:
- IoT with the right radio
- MKR Zero
- Highlights:
- I2S audio and SD slot
- Good for:
- Sound and data logging
- Due
- Highlights:
- 84 MHz Cortex-M3, 3.3 V, many pins
- Good for:
- Fast loops and many I/O
- GIGA R1 WiFi
- Highlights:
- Dual-core STM32H747 in a Mega layout, Wi-Fi and BLE
- Good for:
- Large projects and displays
- Portenta H7 / C33
- Highlights:
- Industrial grade, dual-core or Cortex-M33
- Good for:
- Edge AI, gateways, motion control
- Opta
- Highlights:
- Micro PLC with relays and DIN rail
- Good for:
- Industrial control
- Nicla Sense ME / Voice
- Highlights:
- Tiny sensor and voice boards
- Good for:
- Wearables and edge AI
- UNO Q
- Highlights:
- Linux processor plus STM32 MCU in UNO form
- Good for:
- Vision, AI and robotics with a microcontroller
Voltage and shields
Most modern boards run at 3.3 V and their pins are not 5 V tolerant. If you use a 5 V sensor or an older shield, add level shifting; see logic-level shifting. The Nano Every and UNO R3 run at 5 V, so they work with many classic modules. See Arduino shields for form-factor compatibility.
Software and libraries
All official boards work with the Arduino IDE and the Arduino cloud. Install the matching board package (for example Arduino Mbed OS or Renesas) from the Boards Manager. Many third-party libraries target AVR and need small changes on ARM boards. For advanced work, the GIGA R1 and Portenta support MicroPython and the dual cores; see choosing a microcontroller.
Arduino or ESP32 or STM32?
If you want official support, a large community and consistent pin layouts, pick Arduino. If you want Wi-Fi and Bluetooth for less money, an ESP32 is hard to beat. If you want industrial form factors and tools, look at Opta and Portenta. For a comparison with other families see Arduino vs Raspberry Pi and STM32 boards.
Try it: Adc resolution calculator
Change the values and the diagram and results update as you type.
Common mistakes to avoid
- Connecting 5 V signals to a 3.3 V Nano 33 or MKR pin.
- Choosing a board without the radio you need.
- Expecting every AVR library to run on ARM boards unchanged.
- Powering a board over 5 V on a pin that expects 3.3 V.
- Overspending on a Portenta for a simple blink project.
Frequently asked questions
Which official Arduino is best for beginners?
The UNO R3 or Nano Every, for 5 V compatibility and the most tutorials.
Do Nano 33 boards support 5 V sensors?
Not directly. Their pins are 3.3 V, so use a level shifter.
What is the UNO Q?
A board combining a Linux processor and a microcontroller, for vision and AI projects.
What is Opta?
An industrial micro PLC programmable from the Arduino IDE.
Which board has LoRa?
The MKR WAN 1310. See the LoRaWAN guide for networks.
Parts for this guide
Calculators
Terms in this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.








