Component guide · Beginner · 4 min read
Arduino UNO R4 and UNO Q

UNO R4 Minima, UNO R4 WiFi, Arduino UNO EK R4 Minima and WiFi (Made in India), UNO Q 2GB and 4GB, VENTUNO Q Edge AI Computer, Uno WiFi Rev2 and Uno Mini Limited Edition
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
The UNO R4 keeps the classic UNO shape and 5 V pins but uses a 32-bit Renesas RA4M1 chip with more memory, a 12-bit DAC, CAN and USB-C. The R4 WiFi adds an ESP32-S3 for Wi-Fi and Bluetooth plus a 12x8 LED matrix. EK R4 boards are the same design made in India. UNO Q is different: it pairs a Linux processor with a microcontroller, so it can run Python, AI and Arduino sketches together.
Key specs at a glance
- UNO R4 MCU
- Renesas RA4M1, Arm Cortex-M4, 48 MHz, 256 KB flash, 32 KB RAM
- R4 WiFi extras
- ESP32-S3 for Wi-Fi/BLE, 12x8 LED matrix, Qwiic connector
- R4 I/O
- 5 V logic, 14 digital, 6 analog, 12-bit DAC, CAN, op-amp
- UNO Q
- Qualcomm QRB2210 Linux processor plus STM32U585 MCU, 2 or 4 GB RAM
- VENTUNO Q
- Larger edge AI computer in the same family
- Power
- USB-C 5 V or 6-24 V VIN on R4
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Arduino UNO EK R4 Minima, Made in India₹1,003
Option 2Arduino UNO EK R4 WiFi, Made in India₹1,428
Option 3Arduino UNO Q 4GB (ABX00173)₹8,989
Option 4Arduino UNO Q SBC 2GB – Qualcomm Dragonwing QRB2210₹6,749
Option 5Arduino UNO Q Single Board Computer 4GB₹9,039
Option 6Arduino UNO R4 Minima Development Board₹1,003
What the Arduino UNO R4 Minima, UNO R4 WiFi, Made-in-India EK R4, UNO Q and VENTUNO Q, Uno WiFi Rev2 and Uno Mini is
The UNO R4 is the 32-bit update of the classic UNO with the same shape and 5 V pins, while the UNO Q pairs a Linux processor with a microcontroller on an Uno-sized board.
Install the 'Arduino UNO R4 Boards' package in the Boards Manager, select the right board and upload as with an R3. Most R3 sketches and shields work, but code that writes AVR registers directly or relies on 8-bit timer tricks needs updating. Pins still output up to about 8 mA safely; drive relays and motors through a driver.
On the R4 WiFi, use the WiFiS3 library for networking and Arduino_LED_Matrix for the display. The UNO Q is set up through Arduino App Lab, which runs Linux apps on the processor and sketches on the microcontroller; treat it more like a small computer than an UNO.
Arduino UNO R4 Minima, UNO R4 WiFi, Made-in-India EK R4, UNO Q and VENTUNO Q, Uno WiFi Rev2 and Uno Mini pinout
The pins on the Arduino UNO R4 Minima, UNO R4 WiFi, Made-in-India EK R4, UNO Q and VENTUNO Q, Uno WiFi Rev2 and Uno Mini and what each one does.
| Pin | Function |
|---|---|
| D0-D13 | Digital I/O, 5 V |
| A0-A5 | Analog in; A0 also DAC output |
| CANTX / CANRX | CAN bus (needs a transceiver) |
| Qwiic | I2C connector on R4 WiFi |
| USB-C | Power and programming |
| VIN | 6-24 V input on R4 |
- D0-D13
- Digital I/O, 5 V
- A0-A5
- Analog in; A0 also DAC output
- CANTX / CANRX
- CAN bus (needs a transceiver)
- Qwiic
- I2C connector on R4 WiFi
- USB-C
- Power and programming
- VIN
- 6-24 V input on R4
Wiring the Arduino UNO R4 Minima, UNO R4 WiFi, Made-in-India EK R4, UNO Q and VENTUNO Q, Uno WiFi Rev2 and Uno Mini
The Qwiic port on the R4 WiFi is 3.3 V; the header pins are 5 V.
| Arduino UNO R4 Minima, UNO R4 WiFi, Made-in-India EK R4, UNO Q and VENTUNO Q, Uno WiFi Rev2 and Uno Mini pin | Connection | Note |
|---|---|---|
| USB-C | PC | Select the R4 board in the IDE |
| Shield | UNO header | 5 V shields work |
| Qwiic sensor | Qwiic port | 3.3 V I2C |
| CAN | CAN transceiver | Not directly to the bus |
- USB-C
- Connection:
- PC
- Note:
- Select the R4 board in the IDE
- Shield
- Connection:
- UNO header
- Note:
- 5 V shields work
- Qwiic sensor
- Connection:
- Qwiic port
- Note:
- 3.3 V I2C
- CAN
- Connection:
- CAN transceiver
- Note:
- Not directly to the bus
Example code
This needs the UNO R4 WiFi; the Minima has no LED matrix.
#include "Arduino_LED_Matrix.h"
ArduinoLEDMatrix matrix;
uint8_t frame[8][12] = {
{0,0,1,1,0,0,0,0,1,1,0,0},
{0,1,0,0,1,0,0,1,0,0,1,0},
{0,1,0,0,0,1,1,0,0,0,1,0},
{0,0,1,0,0,0,0,0,0,1,0,0},
{0,0,0,1,0,0,0,0,1,0,0,0},
{0,0,0,0,1,0,0,1,0,0,0,0},
{0,0,0,0,0,1,1,0,0,0,0,0},
{0,0,0,0,0,0,0,0,0,0,0,0}
};
void setup() {
matrix.begin();
matrix.renderBitmap(frame, 8, 12);
}
void loop() {}Setup and tuning
install 'Arduino UNO R4 Boards' for R4 Minima and WiFi; the UNO Q uses Arduino App Lab and its own core.
UNO R4 pins are 5 V like the old UNO; the UNO Q header is 3.3 V.
R4 pins supply less current than the old UNO (about 8 mA advised), so drive LEDs with resistors and loads through transistors.
most UNO libraries work on R4; some that use AVR registers directly need updated versions.
use the LED matrix library and the WiFiS3 library for the ESP32-S3 radio.
What you need
Shop this list11 of 11 found in our store · ₹75,593
Arduino UNO EK R4 Minima, Made in India: the part this guide coversArduino UNO EK R4 Minima, Made in India₹1,003
Arduino UNO EK R4 WiFi, Made in India: another version this guide coversArduino UNO EK R4 WiFi, Made in India₹1,428
Arduino UNO Q 4GB (ABX00173): another version this guide coversArduino UNO Q 4GB (ABX00173)₹8,989
Arduino UNO Q SBC 2GB – Qualcomm Dragonwing QRB2210: another version this guide coversArduino UNO Q SBC 2GB – Qualcomm Dragonwing QRB2210₹6,749
Arduino UNO Q Single Board Computer 4GB: another version this guide coversArduino UNO Q Single Board Computer 4GB₹9,039
Arduino UNO R4 Minima Development Board: another version this guide coversArduino UNO R4 Minima Development Board₹1,003
Arduino UNO R4 WiFi Development Board ABX00087: another version this guide coversArduino UNO R4 WiFi Development Board ABX00087₹1,429
Official Arduino UNO R4 WiFi Development Board: another version this guide coversOfficial Arduino UNO R4 WiFi Development Board₹2,239
Arduino VENTUNO Q Edge AI Computer ABX00181: another version this guide coversArduino VENTUNO Q Edge AI Computer ABX00181₹34,049
Arduino Uno WiFi Rev2 Development Board: another version this guide coversArduino Uno WiFi Rev2 Development Board₹6,240
Arduino Uno Mini Limited Edition ABX00062: another version this guide coversArduino Uno Mini Limited Edition ABX00062₹3,425
Alternatives and when to choose them
- Arduino UNO: the classic R3.
- Official Arduino boards compared: the whole range.
- UNO Q accessories: add-ons for UNO Q.
Common mistakes to avoid
- Driving high-current loads straight from R4 pins.
- Using AVR register code that does not run on the R4's Renesas chip.
- Treating the UNO Q header as 5 V.
- Selecting the old UNO board type for an UNO R4.
Frequently asked questions
Will my old UNO shields work on the UNO R4?
Most will, because the R4 keeps the shape and 5 V logic. Shields that rely on AVR-specific code may need library updates.
What is the difference between R4 Minima and R4 WiFi?
The WiFi version adds an ESP32-S3 for Wi-Fi and Bluetooth, an LED matrix and a Qwiic port.
Is the UNO Q a replacement for a Raspberry Pi?
It can run Linux apps, but it is built to combine Linux with real-time microcontroller control.
Can the UNO R4 output a real analog voltage?
Yes. It has a 12-bit DAC on pin A0.
Are the EK R4 boards the same as Arduino's?
Yes. They are the same official design made in India.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.
