Component guide · Intermediate · 5 min read
BLE Beacons, Sensor Tags and Item Trackers

EasyReach BLEV and IoT Beacons, Holyiot nRF52 Beacons and Logger, HoneyComm iBeacons and GA25 AoA Gateway, SenseCAP BC03, IndieSemiC Asset Tag, Find My Trackers and Anti-Lost Tags
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
BLE beacons repeatedly broadcast a short ID (iBeacon or Eddystone) so phones and gateways can tell what is nearby. Sensor beacons also send temperature, humidity or motion. Use them for indoor navigation, attendance, asset and pallet tracking or cold-chain logging. Find My trackers work with Apple's Find My network; anti-lost tags beep when a phone goes out of range.
Key specs at a glance
- Formats
- iBeacon, Eddystone, custom; some sensor data
- Chips
- nRF52810, nRF52820, nRF52832, others
- Battery
- CR2032, CR2477 or ER14250; months to years
- Range
- 10 m to 100 m depending on power setting
- Sensors
- Accelerometer, temperature, humidity on sensor tags
- Gateway
- HoneyComm GA25 AoA gateway gives direction finding
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1EasyReach Solutions BLEV-Beacon-2.1 Bluetooth 5.0 Low Energy Beacon₹531
Option 2EasyReach Solutions BLEV-Beacon-2.1 PCB Bluetooth 5.0 Beacon₹413
Option 3EasyReach Solutions IoT-BLE-Beacon-V2.3 BLE 5.3 Beacon₹767
Option 4EasyReach Solutions UFL-OBA-V2.3-PCB Bluetooth 5.3 Beacon w/ CR2477₹649
Option 5Holyiot 21011 nRF52810 Accelerometer Asset Tracking Beacon BLE 4.2 IP67₹1,489
Option 6Holyiot 21011 nRF52810 BLE 5.0 Beacon w/ Sensors₹1,519
What the BLE beacons, sensor tags and item trackers is
BLE beacons broadcast a short Bluetooth signal on a timer, so phones and gateways can detect them for indoor location, attendance and finding items.
Configure beacons with the maker's app: set UUID, major and minor, advertising interval and transmit power. Longer intervals and lower power give longer battery life.
To read beacons, use an ESP32 scanning for BLE adverts, a BLE gateway, or a phone app. Item trackers sold for Apple Find My only work with iPhones; they do not expose data to your own code.
BLE beacons, sensor tags and item trackers pinout
The pins on the BLE beacons, sensor tags and item trackers and what each one does.
| Pin | Function |
|---|---|
| Battery | Coin or lithium cell |
| Button | Wake, configure or locate |
| Antenna | Internal PCB |
| LED / buzzer | On trackers and some beacons |
| Mount | Adhesive, screw or key ring |
- Battery
- Coin or lithium cell
- Button
- Wake, configure or locate
- Antenna
- Internal PCB
- LED / buzzer
- On trackers and some beacons
- Mount
- Adhesive, screw or key ring
Wiring the BLE beacons, sensor tags and item trackers
Metal and water block BLE: mount beacons on the outside of boxes, not inside metal cabinets.
| BLE beacons, sensor tags and item trackers pin | Connection | Note |
|---|---|---|
| Beacon | No wiring, place on the asset | Avoid metal surfaces |
| Gateway | Power and Ethernet or Wi-Fi | Ceiling mount for coverage |
| ESP32 scanner | USB power | Code below |
- Beacon
- Connection:
- No wiring, place on the asset
- Note:
- Avoid metal surfaces
- Gateway
- Connection:
- Power and Ethernet or Wi-Fi
- Note:
- Ceiling mount for coverage
- ESP32 scanner
- Connection:
- USB power
- Note:
- Code below
Example code
In ESP32 Arduino core 3.x start() returns a pointer as shown; on core 2.x it returns an object, so use found.getCount() instead.
#include <BLEDevice.h>
#include <BLEScan.h>
void setup() {
Serial.begin(115200);
BLEDevice::init("");
}
void loop() {
BLEScan* scan = BLEDevice::getScan();
scan->setActiveScan(true);
BLEScanResults* found = scan->start(5, false);
for (int i = 0; i < found->getCount(); i++) {
BLEAdvertisedDevice d = found->getDevice(i);
Serial.printf("%s RSSI %d\n", d.getAddress().toString().c_str(), d.getRSSI());
}
scan->clearResults();
}Setup and tuning
set the beacon format (iBeacon or Eddystone), UUID, interval and power in the maker's app.
a 1 s interval is a good balance; faster intervals drain the coin cell sooner.
mount beacons high and away from metal; bodies and walls weaken the signal.
RSSI-based distance is only a guide; use it for near, medium or far zones.
change the default configuration password so others cannot reconfigure your beacons.
What you need
Shop this list20 of 20 found in our store · ₹63,174
EasyReach Solutions BLEV-Beacon-2.1 Bluetooth 5.0 Low Energy Beacon: the part this guide coversEasyReach Solutions BLEV-Beacon-2.1 Bluetooth 5.0 Low Energy Beacon₹531
EasyReach Solutions BLEV-Beacon-2.1 PCB Bluetooth 5.0 Beacon: another version this guide coversEasyReach Solutions BLEV-Beacon-2.1 PCB Bluetooth 5.0 Beacon₹413
EasyReach Solutions IoT-BLE-Beacon-V2.3 BLE 5.3 Beacon: another version this guide coversEasyReach Solutions IoT-BLE-Beacon-V2.3 BLE 5.3 Beacon₹767
EasyReach Solutions UFL-OBA-V2.3-PCB Bluetooth 5.3 Beacon w/ CR2477: another version this guide coversEasyReach Solutions UFL-OBA-V2.3-PCB Bluetooth 5.3 Beacon w/ CR2477₹649
Holyiot 21011 nRF52810 Accelerometer Asset Tracking Beacon BLE 4.2 IP67: another version this guide coversHolyiot 21011 nRF52810 Accelerometer Asset Tracking Beacon BLE 4.2 IP67₹1,489
Holyiot 21011 nRF52810 BLE 5.0 Beacon w/ Sensors: another version this guide coversHolyiot 21011 nRF52810 BLE 5.0 Beacon w/ Sensors₹1,519
Holyiot 21011 nRF52810 Bluetooth 5.0 IP67 iBeacon w/ CR2032: another version this guide coversHolyiot 21011 nRF52810 Bluetooth 5.0 IP67 iBeacon w/ CR2032₹1,459
Holyiot 21014 nRF52810 BLE 5.0 Beacon with Accelerometer Sensor for Asset Tracking (IP67 Waterproof): another version this guide coversHolyiot 21014 nRF52810 BLE 5.0 Beacon with Accelerometer Sensor for Asset Tracking (IP67 Waterproof)₹1,459
Holyiot 21061 nRF52832 BLE Sensor w/ Accelerometer, Gyroscope, Temp/Humidity: another version this guide coversHolyiot 21061 nRF52832 BLE Sensor w/ Accelerometer, Gyroscope, Temp/Humidity₹4,149
Holyiot 22049 nRF52810 BLE 5.0 Beacon Tag w/ Accelerometer & Temp/Humidity Sensor: another version this guide coversHolyiot 22049 nRF52810 BLE 5.0 Beacon Tag w/ Accelerometer & Temp/Humidity Sensor₹1,909
Holyiot 22049 nRF52810 Beacon Tag w/ Accelerometer & Temp/Humidity Sensor: another version this guide coversHolyiot 22049 nRF52810 Beacon Tag w/ Accelerometer & Temp/Humidity Sensor₹2,629
Holyiot 23068 nRF52805 Bluetooth Beacon Indoor Positioning Module: another version this guide coversHolyiot 23068 nRF52805 Bluetooth Beacon Indoor Positioning Module₹699
Holyiot Logger L1 BLE 5.1 Environmental Sensor Data Logger: another version this guide coversHolyiot Logger L1 BLE 5.1 Environmental Sensor Data Logger₹2,699
HoneyComm GA25 IoT Bluetooth AoA Gateway, White: another version this guide coversHoneyComm GA25 IoT Bluetooth AoA Gateway, White₹37,379
HoneyComm H8 Pallet-Tracking iBeacon IoT Beacon: another version this guide coversHoneyComm H8 Pallet-Tracking iBeacon IoT Beacon₹719
HoneyComm HCBB01C IoT Beacon BLE 4.2 w/ ER14250 Batteries: another version this guide coversHoneyComm HCBB01C IoT Beacon BLE 4.2 w/ ER14250 Batteries₹979
HoneyComm HCBB02C IoT Beacon Standard iBeacon: another version this guide coversHoneyComm HCBB02C IoT Beacon Standard iBeacon₹889
HoneyComm HCBB07 IoT Beacon Standard iBeacon: another version this guide coversHoneyComm HCBB07 IoT Beacon Standard iBeacon₹1,099
HoneyComm HCBB07C IoT Beacon BLE 4.2 Asset Tracker: another version this guide coversHoneyComm HCBB07C IoT Beacon BLE 4.2 Asset Tracker₹649
HoneyComm HCBB22 IoT Bluetooth Beacon, iBeacon, IP68, 100m Range: another version this guide coversHoneyComm HCBB22 IoT Bluetooth Beacon, iBeacon, IP68, 100m Range₹1,089
Alternatives and when to choose them
- BLE serial modules: data links.
- nRF52 modules: build your own beacon.
- LoRaWAN nodes: longer range tracking.
Common mistakes to avoid
- Leaving the default configuration password unchanged.
- Setting a very fast interval and flattening the battery.
- Mounting beacons on metal surfaces.
- Expecting precise distance from signal strength.
Frequently asked questions
How long does a beacon battery last?
From months to a few years, depending on interval, transmit power and battery size.
Can an ESP32 detect BLE beacons?
Yes. An ESP32 can scan for beacons and read their IDs and signal strength.
How accurate is beacon distance?
Only roughly. Signal strength varies a lot, so use zones like near and far.
What is the difference between iBeacon and Eddystone?
They are two advertising formats; most beacons can send either, and apps look for one.
Can I track an item across a city?
No. BLE reaches tens of metres; city-wide tracking needs GPS with cellular or LoRa.
Parts for this guide
- ₹531View
- ₹413View
- ₹767View
- ₹649View
- ₹1,489View
- ₹1,519View
- ₹1,459View
Holyiot 21014 nRF52810 BLE 5.0 Beacon with Accelerometer Sensor for Asset Tracking (IP67 Waterproof)₹1,459View- ₹4,149View
- ₹1,909View
- ₹2,629View
- ₹699View
- ₹2,699View
- ₹37,379View
- ₹719View
- ₹979View
- ₹889View
- ₹1,099View
- ₹649View
- ₹1,089View
- ₹1,719View
- ₹639View
- ₹399View
- ₹399View
- ₹154View
- ₹126View
- ₹103View
- ₹859View
- ₹859View
- ₹389View
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.










