Component guide · Intermediate · 3 min read
E-Paper Displays

Waveshare 1.54, 1.9 Segment, 3, 3.52, 3.7 and 4.26 Inch SPI Modules and HATs, Good Display 1.54 and 3.7 Inch Black-and-White and Red Panels
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
E-paper shows an image without power, so it suits badges, price tags and weather displays that update rarely. These panels use SPI. Black-and-white panels refresh fastest, red or yellow versions take many seconds, and partial refresh is only on some. Pick size and colour first, then use the maker's library.
Key specs at a glance
- Sizes
- 1.54 to 4.26 inch, plus a 1.9 inch segment panel
- Colours
- Black-white, black-white-red, red-yellow
- Interface
- SPI plus BUSY, RST and DC
- Refresh
- Seconds; colour panels slower
- Power
- Draws power only while updating
- Brands
- Waveshare and Good Display
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Waveshare 1.54 inch e-Ink Paper Display Module with SPI Interface₹1,411
Option 2Waveshare 3.52inch e-Paper HAT 360×240 SPI Interface₹2,864
Option 3Waveshare 3inch E-Paper Display Module (G), 400×168, Red/Yellow/Black/White₹2,506
Option 4Waveshare 3.52inch e-Paper Display 360 × 240 SPI Interface₹1,571
Option 5Waveshare 1.9 inch Segment E-Paper Module for Temperature and humidity meter, Humidifier, Digital Meter₹1,441
Option 61.54 Inch Black ,White and Red E-Paper Good Display₹755
What the E-paper displays (Waveshare and Good Display) is
E-paper (e-ink) keeps its image when power is removed, which makes it ideal for battery projects that update every few minutes. Black-and-white panels refresh in a couple of seconds and some support partial updates; tri-colour panels take noticeably longer and should not be refreshed more than the datasheet allows.
Waveshare HATs plug on the Pi header; the module versions have a pin header for Arduino and ESP32. Good Display panels are bare panels, sometimes with a front light.
E-paper displays (Waveshare and Good Display) pinout
The pins on the E-paper displays (Waveshare and Good Display) and what each one does.
| Pin | Function |
|---|---|
| VCC / GND | 3.3 V power |
| DIN / CLK | SPI data and clock |
| CS / DC / RST | Control pins |
| BUSY | Goes busy during refresh |
- VCC / GND
- 3.3 V power
- DIN / CLK
- SPI data and clock
- CS / DC / RST
- Control pins
- BUSY
- Goes busy during refresh
Wiring the E-paper displays (Waveshare and Good Display)
How the E-paper displays (Waveshare and Good Display) fits and connects.
| E-paper displays (Waveshare and Good Display) pin | Fits or connects to | Note |
|---|---|---|
| VCC | 3.3V | 3V3 |
| GND | GND | GND |
| DIN | D11 | GPIO 23 |
| CLK | D13 | GPIO 18 |
| CS / DC / RST / BUSY | D10, D9, D8, D7 | GPIO 5, 2, 4, 15 |
- VCC
- Fits or connects to:
- 3.3V
- Note:
- 3V3
- GND
- Fits or connects to:
- GND
- Note:
- GND
- DIN
- Fits or connects to:
- D11
- Note:
- GPIO 23
- CLK
- Fits or connects to:
- D13
- Note:
- GPIO 18
- CS / DC / RST / BUSY
- Fits or connects to:
- D10, D9, D8, D7
- Note:
- GPIO 5, 2, 4, 15
Example code
A short order of work that suits this family.
1. Wire the module with 3.3 V logic and power.
2. Install the Waveshare or GxEPD2 library for your exact panel.
3. Run the library's example for your size and colour.
4. Wait for BUSY to go low before sending the next command.
5. After the image, put the panel to sleep so it holds the image without power.Setup and tuning
colour panels should be refreshed at most once every few minutes.
always sleep the panel after updating; leaving it powered can damage it.
GxEPD2 supports most Waveshare and Good Display panels.
use 3.3 V signals.
What you need
Shop this list10 of 10 found in our store · ₹19,675
Waveshare 1.54 inch e-Ink Paper Display Module with SPI Interface: the part this guide coversWaveshare 1.54 inch e-Ink Paper Display Module with SPI Interface₹1,411
Waveshare 3.52inch e-Paper HAT 360×240 SPI Interface: another version this guide coversWaveshare 3.52inch e-Paper HAT 360×240 SPI Interface₹2,864
Waveshare 3inch E-Paper Display Module (G), 400×168, Red/Yellow/Black/White: another version this guide coversWaveshare 3inch E-Paper Display Module (G), 400×168, Red/Yellow/Black/White₹2,506
Waveshare 3.52inch e-Paper Display 360 × 240 SPI Interface: another version this guide coversWaveshare 3.52inch e-Paper Display 360 × 240 SPI Interface₹1,571
Waveshare 1.9 inch Segment E-Paper Module for Temperature and humidity meter, Humidifier, Digital Meter: another version this guide coversWaveshare 1.9 inch Segment E-Paper Module for Temperature and humidity meter, Humidifier, Digital Meter₹1,441
1.54 Inch Black ,White and Red E-Paper Good Display: another version this guide covers1.54 Inch Black ,White and Red E-Paper Good Display₹755
1.54 Inch Black and White E-Paper Display with Front Light: another version this guide covers1.54 Inch Black and White E-Paper Display with Front Light₹1,262
Good Display 3.7 Inch Black and White E-Paper Display: another version this guide coversGood Display 3.7 Inch Black and White E-Paper Display₹1,431
Waveshare 4.26inch e-Paper display HAT, 800x480, Black/White, SPI Interface: another version this guide coversWaveshare 4.26inch e-Paper display HAT, 800x480, Black/White, SPI Interface₹4,018
Waveshare 3.7inch 416 × 240 Pixels Red/Yellow/Black/White E-Paper Display (G), E-Ink Display with SPI Interfac: another version this guide coversWaveshare 3.7inch 416 × 240 Pixels Red/Yellow/Black/White E-Paper Display (G), E-Ink Display with SPI Interfac₹2,416
Alternatives and when to choose them
- TFT displays: fast colour screens.
- Small I2C OLEDs: simple monochrome graphics.
- Battery projects: power ideas.
Common mistakes to avoid
- Refreshing a tri-colour panel constantly.
- Leaving the panel powered after the update.
- Forgetting to wait for BUSY.
- Using the wrong library for the panel.
Frequently asked questions
Does e-paper keep the image without power?
Yes, it holds the picture until the next update.
Why is the colour panel slow?
Red and yellow pigments take many seconds to refresh.
Which library works?
GxEPD2 supports most Waveshare and Good Display panels.
Can I use it outdoors?
Yes, e-paper reads well in daylight.
Do I need the BUSY pin?
Yes, wait for it before sending more commands.
Parts for this guide
- ₹1,411View
- ₹2,864View
- ₹2,506View
- ₹1,571View
Waveshare 1.9 inch Segment E-Paper Module for Temperature and humidity meter, Humidifier, Digital Meter₹1,441View- ₹755View
- ₹1,262View
- ₹1,431View
- ₹4,018View
Waveshare 3.7inch 416 × 240 Pixels Red/Yellow/Black/White E-Paper Display (G), E-Ink Display with SPI Interfac₹2,416View
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.
