Component guide · Intermediate · 5 min read
NXP MCX and LPC Development Boards

FRDM-MCXA153, MCXA156, MCXA346, MCXC041, MCXC242, MCXC444, MCXE247, MCXE31B, MCXN236, MCXN947, MCXW71, RW612, MCX-N5XX and N9XX EVKs, LPC55S28 and LPC55S69 EVK, LPC845-BRK, LPC11U68, mbed LPC1768, KwikStik K40, i.MX RT106V and FRDM-IMX91
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
MCX is NXP's current microcontroller family, replacing Kinetis and LPC for new designs. MCX A is low cost, MCX C is a simple Cortex-M0+, MCX E is for automotive and industrial, MCX N adds an NPU for machine learning, and MCX W and RW612 add wireless. FRDM boards are cheap with an Arduino-style header and a built-in debugger. Older LPC boards such as LPC55S69 and LPC845-BRK are still well supported.
Key specs at a glance
- Cores
- Cortex-M0+ (MCXC, LPC845), M3 (LPC1768), M4F (MCXE247), M7F (MCXE31B), M33 (MCXA, MCXN, LPC55, RW612)
- Wireless
- BLE, Zigbee, Thread on MCXW71; Wi-Fi 6 + BLE on RW612
- AI
- eIQ Neutron NPU on MCXN947 and N236
- Debugger
- On-board MCU-Link or CMSIS-DAP over USB
- Headers
- Arduino Uno style, mikroBUS, Pmod by board
- Software
- MCUXpresso IDE, VS Code extension, Zephyr, Arm Mbed (LPC1768, legacy)
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1NXP Semiconductors FRDM-MCXA153 Development Board₹2,199
Option 2NXP Semiconductors FRDM-MCXA156 Development Board (Cortex-M33, CAN-FD, I3C)₹2,209
Option 3NXP Semiconductors FRDM-MCXA346 MCXA346VLQ ARM Cortex-M33F Dev Board₹3,039
Option 4NXP Semiconductors FRDM-MCXC041 Cortex-M0+ Development Kit₹1,729
Option 5NXP Semiconductors FRDM-MCXC242 Arm Cortex-M0+ Development Kit₹1,519
Option 6NXP Semiconductors FRDM-MCXC444 Development Board₹1,569
What the NXP MCX and LPC boards: FRDM-MCXA, MCXC, MCXE, MCXN, MCXW71, RW612, MCX-N EVKs, LPC55S69, LPC845-BRK and LPC1768 is
NXP MCX and LPC boards, such as the FRDM-MCXN947 and LPCXpresso kits, are Arm Cortex-M development boards with on-board debuggers for embedded and industrial projects.
Install MCUXpresso for VS Code (or MCUXpresso IDE) and download the SDK for your exact board from the NXP SDK builder. Import an example such as led_blinky, build and flash over the USB debug port. Zephyr also supports most FRDM-MCX boards if you prefer an RTOS.
The I/O on most of these chips is 3.3 V and not 5 V tolerant on every pin, so use level shifters with 5 V Arduino shields. The FRDM-IMX91 is different: it is a Linux board with a Cortex-A55, not a microcontroller. The mbed LPC1768 and KwikStik K40 are legacy boards for maintaining older projects.
NXP MCX and LPC boards: FRDM-MCXA, MCXC, MCXE, MCXN, MCXW71, RW612, MCX-N EVKs, LPC55S69, LPC845-BRK and LPC1768 pinout
The pins on the NXP MCX and LPC boards: FRDM-MCXA, MCXC, MCXE, MCXN, MCXW71, RW612, MCX-N EVKs, LPC55S69, LPC845-BRK and LPC1768 and what each one does.
| Pin | Function |
|---|---|
| MCU-Link USB | Power, debug and virtual serial port |
| Arduino header | D0-D15, A0-A5 for shields |
| mikroBUS / Pmod | Click and Pmod modules on some boards |
| SWD | Debug for external probes |
| RGB LED / buttons | User LED and switches for first tests |
| Antenna | On MCXW71 and RW612 |
- MCU-Link USB
- Power, debug and virtual serial port
- Arduino header
- D0-D15, A0-A5 for shields
- mikroBUS / Pmod
- Click and Pmod modules on some boards
- SWD
- Debug for external probes
- RGB LED / buttons
- User LED and switches for first tests
- Antenna
- On MCXW71 and RW612
Wiring the NXP MCX and LPC boards: FRDM-MCXA, MCXC, MCXE, MCXN, MCXW71, RW612, MCX-N EVKs, LPC55S69, LPC845-BRK and LPC1768
Use the debug USB port for flashing; some boards have a second USB port that is for the target MCU's own USB.
| NXP MCX and LPC boards: FRDM-MCXA, MCXC, MCXE, MCXN, MCXW71, RW612, MCX-N EVKs, LPC55S69, LPC845-BRK and LPC1768 pin | Connection | Note |
|---|---|---|
| Debug USB | PC | Power and flashing |
| Arduino shield | Header | 3.3 V logic |
| External sensor | I2C or SPI on the header | Check pin mux in the SDK |
- Debug USB
- Connection:
- PC
- Note:
- Power and flashing
- Arduino shield
- Connection:
- Header
- Note:
- 3.3 V logic
- External sensor
- Connection:
- I2C or SPI on the header
- Note:
- Check pin mux in the SDK
Example code
This follows the SDK led_blinky example; the LED macros come from the board files, so start from the example for your board rather than a blank project.
#include "fsl_device_registers.h"
#include "fsl_gpio.h"
#include "board.h"
#include "app.h"
volatile uint32_t ticks = 0;
void SysTick_Handler(void) { ticks++; }
static void delay_ms(uint32_t ms) {
uint32_t start = ticks;
while ((ticks - start) < ms) {}
}
int main(void) {
BOARD_InitHardware(); // clocks, pins, debug console
SysTick_Config(SystemCoreClock / 1000U);
PRINTF("Blinky on %s\r\n", BOARD_NAME);
while (1) {
GPIO_PortToggle(BOARD_LED_GPIO, 1u << BOARD_LED_GPIO_PIN);
delay_ms(500);
}
}Setup and tuning
install MCUXpresso IDE or the MCUXpresso extension for VS Code, plus the SDK for your board.
use the on-board MCU-Link debugger over USB.
import SDK examples like blinky, UART and ADC to start.
use the Config Tools to set pin functions and clocks.
FRDM boards accept many Arduino shields at 3.3 V.
What you need
Shop this list20 of 20 found in our store · ₹1,14,879
NXP Semiconductors FRDM-MCXA153 Development Board: the part this guide coversNXP Semiconductors FRDM-MCXA153 Development Board₹2,199
NXP Semiconductors FRDM-MCXA156 Development Board (Cortex-M33, CAN-FD, I3C): another version this guide coversNXP Semiconductors FRDM-MCXA156 Development Board (Cortex-M33, CAN-FD, I3C)₹2,209
NXP Semiconductors FRDM-MCXA346 MCXA346VLQ ARM Cortex-M33F Dev Board: another version this guide coversNXP Semiconductors FRDM-MCXA346 MCXA346VLQ ARM Cortex-M33F Dev Board₹3,039
NXP Semiconductors FRDM-MCXC041 Cortex-M0+ Development Kit: another version this guide coversNXP Semiconductors FRDM-MCXC041 Cortex-M0+ Development Kit₹1,729
NXP Semiconductors FRDM-MCXC242 Arm Cortex-M0+ Development Kit: another version this guide coversNXP Semiconductors FRDM-MCXC242 Arm Cortex-M0+ Development Kit₹1,519
NXP Semiconductors FRDM-MCXC444 Development Board: another version this guide coversNXP Semiconductors FRDM-MCXC444 Development Board₹1,569
NXP Semiconductors FRDM-MCXE247 ARM Cortex-M4F Freedom Development Board: another version this guide coversNXP Semiconductors FRDM-MCXE247 ARM Cortex-M4F Freedom Development Board₹4,509
NXP Semiconductors FRDM-MCXE31B MCXE31BMPB Cortex-M7F Evaluation Board: another version this guide coversNXP Semiconductors FRDM-MCXE31B MCXE31BMPB Cortex-M7F Evaluation Board₹4,719
NXP Semiconductors FRDM-MCXN236 Development Kit: another version this guide coversNXP Semiconductors FRDM-MCXN236 Development Kit₹2,829
NXP Semiconductors FRDM-MCXN947 Development Board with USB-C: another version this guide coversNXP Semiconductors FRDM-MCXN947 Development Board with USB-C₹3,459
NXP Semiconductors FRDM-MCXW71 MCXW71X ARM Cortex-M33 Dev Board: another version this guide coversNXP Semiconductors FRDM-MCXW71 MCXW71X ARM Cortex-M33 Dev Board₹4,509
NXP Semiconductors FRDM-RW612 Cortex-M33 Development Board with USB Cable: another version this guide coversUSB Cable₹28
NXP Semiconductors MCX-N5XX-EVK MCXN54x ARM Cortex-M33 Evaluation Kit: another version this guide coversNXP Semiconductors MCX-N5XX-EVK MCXN54x ARM Cortex-M33 Evaluation Kit₹26,249
NXP Semiconductors MCX-N9XX-EVK MCXN94x Dual Cortex-M33 Evaluation Kit: another version this guide coversNXP Semiconductors MCX-N9XX-EVK MCXN94x Dual Cortex-M33 Evaluation Kit₹25,829
NXP Semiconductors LPC11U68 MCU Dev Board w/ JTAG & UNO Connectors: another version this guide coversNXP Semiconductors LPC11U68 MCU Dev Board w/ JTAG & UNO Connectors₹3,709
NXP Semiconductors LPC55S28-EVK Development Board: another version this guide coversNXP Semiconductors LPC55S28-EVK Development Board₹5,769
NXP Semiconductors LPC55S69-EVK Dev Board with Cortex-M33 MCU: another version this guide coversNXP Semiconductors LPC55S69-EVK Dev Board with Cortex-M33 MCU₹6,999
NXP Semiconductors LPC845-BRK Dev Board, LPC84x Series MCUs, CMSIS-DAP: another version this guide coversNXP Semiconductors LPC845-BRK Dev Board, LPC84x Series MCUs, CMSIS-DAP₹989
NXP Semiconductors mbed LPC1768 Cortex-M3 Development Board OM11043: another version this guide coversNXP Semiconductors mbed LPC1768 Cortex-M3 Development Board OM11043₹7,849
NXP Semiconductors KWIKSTIK-K40 Development Kit K40X256VLQ100 MCU: another version this guide coversNXP Semiconductors KWIKSTIK-K40 Development Kit K40X256VLQ100 MCU₹5,169
Alternatives and when to choose them
- NXP FRDM boards: Kinetis FRDM boards.
- STM32 and STM8 boards: the main alternative.
- nRF52 BLE boards: another BLE choice.
Common mistakes to avoid
- Using 5 V shields without checking levels.
- Wrong SDK version.
- Skipping clock setup in Config Tools.
- Charge-only USB cables.
Frequently asked questions
Which IDE supports NXP MCX boards?
MCUXpresso IDE or the MCUXpresso for VS Code extension.
Do I need an external debugger?
No. The on-board MCU-Link debugger programs and debugs over USB.
Can I use Arduino shields?
Many work, but check they run at 3.3 V.
What is the MCX N series good for?
Fast MCUs with NPU for edge AI and industrial control.
Why does the debugger not connect?
Update the MCU-Link firmware and use a data USB cable.
Parts for this guide
Projects that use it
Put this into practice: 1 step-by-step build in our project library uses parts from this guide.
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.



