Component guide · Intermediate · 4 min read
SATA and mSATA Boards for Raspberry Pi

Geekworm X1009, 52Pi 5-Bay, X820 2.5 Inch, X850 and X852 mSATA, X872, X873, Argon ONE M.2 and EON NAS
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
These boards let a Raspberry Pi use 2.5 inch SATA drives, mSATA SSDs or extra NVMe drives through a USB bridge. On the Pi 5 the X1009 and 52Pi 5-bay boards use PCIe for real SATA ports, ideal for a home NAS. On the Pi 4 the X820, X850, X852, X872, X873 and Argon boards use a USB 3.0 bridge with a small U-shaped connector.
Key specs at a glance
- Pi 5 boards
- PCIe to 5 SATA ports (JMB585)
- Pi 4 boards
- USB 3.0 to SATA, mSATA or NVMe bridge
- Drives
- 2.5 inch SATA, mSATA, M.2 NVMe
- Power
- 5V from Pi, or 12V DC for many drives
- Speed
- About 350 to 400 MB/s
- Uses
- NAS, media server, backups
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Geekworm X1009 PCIe to 5-Port SATA Shield for Pi 5₹6,919
Option 252Pi 5-Bay SATA PCIe Storage HAT for Raspberry Pi 5, DC/Molex₹6,929
Option 352Pi X820 V3.0 2.5″ SATA HDD/SSD Shield for Raspberry Pi₹2,489
Option 4Geekworm X852 Dual mSATA SSD Shield for Raspberry Pi₹4,200
Option 5X850 mSATA SSD Expansion Board for Raspberry Pi₹1,705
Option 6Geekworm X872 V2.0 NVMe SSD Expansion for Raspberry Pi 4₹3,809
What the SATA and mSATA storage boards for Raspberry Pi is
Pi SATA and mSATA storage boards connect SSDs or hard drives to a Raspberry Pi over USB or PCIe, for NAS servers, media centres and faster booting.
USB bridge boards connect to the Pi 4's USB 3.0 port with a short U-shaped adapter and appear as a USB drive. Pi 5 SATA boards use the PCIe FFC and show each drive as sdX.
The Argon EON is a full 4-bay NAS case for the Pi 4; it needs a 12V supply that is not included.
SATA and mSATA storage boards for Raspberry Pi pinout
The pins on the SATA and mSATA storage boards for Raspberry Pi and what each one does.
| Pin | Function |
|---|---|
| PCIe FFC or USB bridge | PCIe on Pi 5 boards, USB 3.0 on Pi 4 boards |
| SATA ports | Data plus power for each drive |
| DC jack | 12V input for 3.5 inch or many drives |
| Pogo / GPIO 5V | Powers the Pi from the board on some models |
- PCIe FFC or USB bridge
- PCIe on Pi 5 boards, USB 3.0 on Pi 4 boards
- SATA ports
- Data plus power for each drive
- DC jack
- 12V input for 3.5 inch or many drives
- Pogo / GPIO 5V
- Powers the Pi from the board on some models
Wiring the SATA and mSATA storage boards for Raspberry Pi
Power everything off before plugging drives. Use the board's DC input whenever it has one; drives spin up with a current spike.
| SATA and mSATA storage boards for Raspberry Pi pin | Connection | Note |
|---|---|---|
| Pi 5 SATA board | PCIe FFC | 12V DC for more than two drives |
| Pi 4 USB bridge | U-shaped USB 3.0 adapter | Use a blue USB 3.0 port |
| Drives | Push into the SATA connector | Screw down 2.5 inch drives |
- Pi 5 SATA board
- Connection:
- PCIe FFC
- Note:
- 12V DC for more than two drives
- Pi 4 USB bridge
- Connection:
- U-shaped USB 3.0 adapter
- Note:
- Use a blue USB 3.0 port
- Drives
- Connection:
- Push into the SATA connector
- Note:
- Screw down 2.5 inch drives
Example code
Add the drive to /etc/fstab with its UUID (from blkid) so it mounts at boot. OpenMediaVault is an easy NAS dashboard on Raspberry Pi OS Lite.
lsblk # sda, sdb ...
sudo mkfs.ext4 /dev/sda1
sudo mkdir -p /srv/share && sudo mount /dev/sda1 /srv/share
sudo apt install samba
printf '[share]\n path=/srv/share\n read only=no\n' | sudo tee -a /etc/samba/smb.conf
sudo systemctl restart smbdSetup and tuning
USB-SATA boards work on any Pi; PCIe SATA HATs need a Pi 5 or CM4.
2.5-inch drives may need extra power; 3.5-inch drives need 12 V.
choose a bridge chip with UASP support for speed; some need quirks if unstable.
update the bootloader to boot from USB or PCIe.
use OpenMediaVault for file sharing.
What you need
Shop this list12 of 12 found in our store · ₹67,297
Geekworm X1009 PCIe to 5-Port SATA Shield for Pi 5: the part this guide coversGeekworm X1009 PCIe to 5-Port SATA Shield for Pi 5₹6,919
52Pi 5-Bay SATA PCIe Storage HAT for Raspberry Pi 5, DC/Molex: another version this guide covers52Pi 5-Bay SATA PCIe Storage HAT for Raspberry Pi 5, DC/Molex₹6,929
52Pi X820 V3.0 2.5″ SATA HDD/SSD Shield for Raspberry Pi: another version this guide covers52Pi X820 V3.0 2.5″ SATA HDD/SSD Shield for Raspberry Pi₹2,489
Geekworm X852 Dual mSATA SSD Shield for Raspberry Pi: another version this guide coversGeekworm X852 Dual mSATA SSD Shield for Raspberry Pi₹4,200
X850 mSATA SSD Expansion Board for Raspberry Pi: another version this guide coversX850 mSATA SSD Expansion Board for Raspberry Pi₹1,705
Geekworm X872 V2.0 NVMe SSD Expansion for Raspberry Pi 4: another version this guide coversGeekworm X872 V2.0 NVMe SSD Expansion for Raspberry Pi 4₹3,809
Geekworm X873 V2.0 M.2 NVMe SSD Board for Raspberry Pi 4: another version this guide coversGeekworm X873 V2.0 M.2 NVMe SSD Board for Raspberry Pi 4₹4,359
Argon ONE M.2 NVMe Expansion Board for Raspberry Pi 4: another version this guide coversArgon ONE M.2 NVMe Expansion Board for Raspberry Pi 4₹3,779
Argon EON Pi NAS for Raspberry Pi 4 (No PSU): another version this guide coversArgon EON Pi NAS for Raspberry Pi 4 (No PSU)₹17,169
Raspberry Pi 5 (4 GB): the board with the PCIe connectorRaspberry Pi Compute Module 5 IO Board₹3,159Closest match, check the specs
Raspberry Pi 4 Model B (4 GB): for USB and GPIO boardsRaspberry Pi 4 Model B with 4GB RAM₹11,461Closest match, check the specs
Official 27W USB-C power supply for Pi 5: enough current for the Pi plus an SSDOfficial 27W USB-C PD Power Supply for Raspberry Pi 5 – IN Plug₹1,319Closest match, check the specs
Alternatives and when to choose them
- Single NVMe HATs: fastest Pi 5 storage.
- Dual and quad NVMe: SSD NAS.
- Pi cases and cooling: keep drives cool.
Common mistakes to avoid
- Powering big drives from the Pi only.
- Using bridges without UASP or with issues.
- Not updating the bootloader.
- No backup of the NAS data.
Frequently asked questions
Can a Raspberry Pi boot from an SSD?
Yes. Update the bootloader and set USB or NVMe boot order.
Why does my SSD disconnect?
Usually the USB port cannot power the drive, or the bridge chip needs a UAS quirk; try a powered adapter.
Do I need extra power for 3.5-inch drives?
Yes, they need 12 V from a separate supply.
Can I build a NAS with a Pi?
Yes. OpenMediaVault or plain Samba turns a Pi with drives into a home NAS.
Is PCIe SATA faster than USB?
Yes, on a Pi 5, PCIe gives higher speeds.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.

