Component guide · Intermediate · 4 min read
RC Transmitter Modules

RadioMaster Ranger, Ranger Micro and Nano 2.4 GHz ELRS, Nomad Gemini Xrossband, Bandit and Bandit Micro 915/868 MHz ELRS, RM 4IN1 Multi-Protocol, FrSky R9M, R9M 2019, XJT Lite, DJT and TWIN Lite Pro, TBS Tracer Micro and Nano TX, Moxon and T Antennas
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
A transmitter module plugs into the module bay on the back of a radio and adds a new RF link without buying a new radio. ExpressLRS modules (Ranger at 2.4 GHz, Bandit at 900 MHz, Nomad on both) give long range and low latency. The RM 4IN1 talks to many older protocols. FrSky and TBS Tracer modules match their own receivers. Moxon and T antennas boost range on the module.
Key specs at a glance
- ELRS 2.4 GHz
- Ranger, Ranger Micro, Ranger Nano
- ELRS 900 MHz
- Bandit, Bandit Micro (868/915 MHz)
- Dual band
- Nomad Gemini Xrossband, 1 W
- Multi-protocol
- RM 4IN1: FrSky D8/D16, Flysky, Spektrum DSMX and more
- FrSky / TBS
- R9M (900 MHz ACCESS/ACCST), XJT, DJT, TWIN Lite Pro; TBS Tracer 2.4 GHz
- Bay size
- JR (full), Lite or Nano by module
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1FrSky DJT Telemetry Transmitter Module₹3,314
Option 2FrSky Long Range R9M Module₹5,561
Option 3FrSky R9M 2019 Module and R9MX Receiver₹6,191
Option 4FrSky R9M 2019 Transmitter Module₹3,700
Option 5FrSky TWIN Lite Pro Module₹5,306
Option 6FrSky XJT Lite Module₹2,207
What the RC transmitter modules: RadioMaster Ranger, Nomad, Bandit ExpressLRS, RM 4IN1, FrSky R9M, XJT, DJT and TWIN Lite Pro, TBS Tracer TX, and module antennas is
RC transmitter modules for ELRS, FrSky and TBS Crossfire plug into a radio's module bay to add long-range or different protocols.
Check your radio's bay first: full-size JR modules need a JR bay, Micro and Lite modules fit the smaller bay on radios like the Zorro or X-Lite, and Nano modules fit Nano bays. Then pick the link that matches your receivers. In India, use 2.4 GHz or set 900 MHz modules to the 865-867 MHz band allowed for low-power devices, and keep output power within legal limits.
In EdgeTX set the external module to CRSF for ELRS or Tracer, or to the right protocol for 4IN1 and FrSky. Use the ExpressLRS Lua script to set packet rate and power, and bind with the same binding phrase on transmitter and receiver. Never power up a module without its antenna attached.
RC transmitter modules: RadioMaster Ranger, Nomad, Bandit ExpressLRS, RM 4IN1, FrSky R9M, XJT, DJT and TWIN Lite Pro, TBS Tracer TX, and module antennas pinout
The pins on the RC transmitter modules: RadioMaster Ranger, Nomad, Bandit ExpressLRS, RM 4IN1, FrSky R9M, XJT, DJT and TWIN Lite Pro, TBS Tracer TX, and module antennas and what each one does.
| Pin | Function |
|---|---|
| JR / Lite / Nano bay pins | Power, signal and ground from the radio |
| Antenna (SMA or RP-SMA) | Must be fitted before power on |
| USB-C | Firmware updates on ELRS modules |
| External power (some) | XT30 or DC input on high-power modules |
| Fan | Cooling on 1 W modules |
- JR / Lite / Nano bay pins
- Power, signal and ground from the radio
- Antenna (SMA or RP-SMA)
- Must be fitted before power on
- USB-C
- Firmware updates on ELRS modules
- External power (some)
- XT30 or DC input on high-power modules
- Fan
- Cooling on 1 W modules
Wiring the RC transmitter modules: RadioMaster Ranger, Nomad, Bandit ExpressLRS, RM 4IN1, FrSky R9M, XJT, DJT and TWIN Lite Pro, TBS Tracer TX, and module antennas
High-power modules draw a lot of current from the radio battery; use a 2S Li-ion or LiPo radio battery and set power only as high as needed.
| RC transmitter modules: RadioMaster Ranger, Nomad, Bandit ExpressLRS, RM 4IN1, FrSky R9M, XJT, DJT and TWIN Lite Pro, TBS Tracer TX, and module antennas pin | Connection | Note |
|---|---|---|
| Module | Radio module bay | Matching size |
| Antenna | Module RF port | Before power on |
| EdgeTX | External RF = CRSF / MULTI / ACCST | Model setup |
| Receiver | Same binding phrase or bind | Then range test |
- Module
- Connection:
- Radio module bay
- Note:
- Matching size
- Antenna
- Connection:
- Module RF port
- Note:
- Before power on
- EdgeTX
- Connection:
- External RF = CRSF / MULTI / ACCST
- Note:
- Model setup
- Receiver
- Connection:
- Same binding phrase or bind
- Note:
- Then range test
Example code
Menu names vary slightly between EdgeTX and ELRS versions.
1. Model > Setup > External RF: CRSF, baud 400K (or the module's rate).
2. Tools > ExpressLRS Lua script: check the module shows its firmware version.
3. Set Packet Rate (e.g. 250 Hz for 2.4 GHz, 100 Hz for 900 MHz long range).
4. Set TX Power and Dynamic Power as needed.
5. Use the same binding phrase in the module and receiver firmware (ExpressLRS Configurator).
6. Power the receiver; the LED goes solid when linked.
7. Range test at low power before flying.Setup and tuning
check JR (full) or nano/lite bay fit.
set the external module type (CRSF for ELRS and Crossfire) in model setup.
keep module and receiver versions matched.
high power modes need a good radio battery and cooling fan.
attach the antenna before powering up.
What you need
Shop this list18 of 18 found in our store · ₹98,750
FrSky DJT Telemetry Transmitter Module: the part this guide coversFrSky DJT Telemetry Transmitter Module₹3,314
FrSky Long Range R9M Module: another version this guide coversFrSky Long Range R9M Module₹5,561
FrSky R9M 2019 Module and R9MX Receiver: another version this guide coversFrSky R9M 2019 Module and R9MX Receiver₹6,191
FrSky R9M 2019 Transmitter Module: another version this guide coversFrSky R9M 2019 Transmitter Module₹3,700
FrSky TWIN Lite Pro Module: another version this guide coversFrSky TWIN Lite Pro Module₹5,306
FrSky XJT Lite Module: another version this guide coversFrSky XJT Lite Module₹2,207
RadioMaster 2.4GHz Moxon Directional Antenna: another version this guide coversRadioMaster 2.4GHz Moxon Directional Antenna₹2,197
RadioMaster 2.4GHz T Antenna: another version this guide coversRadioMaster 2.4GHz T Antenna₹1,700
RadioMaster Bandit 915/868MHz Moxon Antenna: another version this guide coversRadioMaster Bandit 915/868MHz Moxon Antenna₹3,003
RadioMaster Bandit 915/868MHz T Antenna: another version this guide coversRadioMaster Bandit 915/868MHz T Antenna₹1,629
RadioMaster Bandit Micro ExpressLRS 915MHz RF Module: another version this guide coversRadioMaster Bandit Micro ExpressLRS 915MHz RF Module₹8,028
RadioMaster Nomad Dual 1-watt Gemini Xrossband ExpressLRS Module: another version this guide coversRadioMaster Nomad Dual 1-watt Gemini Xrossband ExpressLRS Module₹8,426
RadioMaster RM 4IN1 Module – 2.4GHz Multi-Protocol RF Module: another version this guide coversRadioMaster RM 4IN1 Module – 2.4GHz Multi-Protocol RF Module₹8,839
RadioMaster Ranger 2.4GHz ELRS Module: another version this guide coversRadioMaster Ranger 2.4GHz ELRS Module₹15,869
RadioMaster Ranger Micro 2.4GHz ELRS Module: another version this guide coversRadioMaster Ranger Micro 2.4GHz ELRS Module₹6,486
RadioMaster Ranger Nano 2.4GHz ELRS Module: another version this guide coversRadioMaster Ranger Nano 2.4GHz ELRS Module₹7,123
TBS TBS Tracer Micro TX – FPV Racing Drone Transmitter: another version this guide coversTBS Tracer Micro TX – FPV Racing Drone Transmitter₹7,003
TBS Tracer Nano TX – FPV Racing Drone Transmitter: another version this guide coversTBS Tracer Nano TX – FPV Racing Drone Transmitter₹2,168
Alternatives and when to choose them
- ELRS and Crossfire receivers: matching receivers.
- RC transmitters: radios with module bays.
- Choosing an RC transmitter: pick a radio.
- FrSky receivers: FrSky link receivers.
Common mistakes to avoid
- No antenna fitted.
- Wrong module type in radio.
- Mismatched firmware.
- Running max power continuously without cooling.
Frequently asked questions
Which module should I choose?
ELRS for most new builds; Crossfire if you already have its receivers.
Why does the radio not detect the module?
The external module type in model setup is not set to CRSF.
Can I power up without the antenna?
No. Transmitting with no antenna can damage the module's RF stage.
Do I need the fan?
Yes at high power levels, so the module does not overheat and reduce power.
Do module and receiver firmware need to match?
Yes. The module and receiver must run the same major firmware version.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.
