Buying guide · Beginner · 3 min read
Choosing an RC Transmitter for Drones and Models
Protocols, Gimbals and Size
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Pick the radio protocol first, because the receiver in your aircraft must speak the same one. ExpressLRS (ELRS) is the popular open choice for FPV drones. Then choose the size, gimbals and firmware: Hall-effect gimbals and EdgeTX software are worth having. Surface radios with a wheel and trigger suit cars and boats.
Key specs at a glance
- Protocols
- ELRS, TBS Crossfire, FrSky ACCESS / ACCST, FlySky AFHDS, Spektrum DSMX
- Firmware
- EdgeTX or OpenTX on most hobby radios; basic radios use closed firmware
- Channels
- At least 6 for aircraft and drones (4 sticks plus arm and mode switches)
- Gimbals
- Hall-effect gimbals last longer and stay centred better than potentiometer types
- Module
- Internal radio or an external module bay (JR/Nano)
- Radio types
- Stick radios for aircraft, surface radios (wheel and trigger) for cars and boats
Radio protocols and receivers
The transmitter and receiver must use the same protocol. A multi-protocol radio can bind to many receivers, while a single-protocol radio only works with its own system.
| System | Strengths | Watch out for |
|---|---|---|
| ExpressLRS (ELRS) | Open source, very low latency, long range, cheap receivers | Both ends must run compatible firmware versions |
| TBS Crossfire | Proven long range, widely used | Costs more; needs a Crossfire receiver |
| FrSky ACCESS / ACCST | Large range of receivers and telemetry | Versions are not all compatible; check the receiver |
| FlySky AFHDS | Budget-friendly for beginners and models | Fewer FPV receivers |
| Multi-protocol module | Binds to many receivers | Setup is more complex |
- ExpressLRS (ELRS)
- Strengths:
- Open source, very low latency, long range, cheap receivers
- Watch out for:
- Both ends must run compatible firmware versions
- TBS Crossfire
- Strengths:
- Proven long range, widely used
- Watch out for:
- Costs more; needs a Crossfire receiver
- FrSky ACCESS / ACCST
- Strengths:
- Large range of receivers and telemetry
- Watch out for:
- Versions are not all compatible; check the receiver
- FlySky AFHDS
- Strengths:
- Budget-friendly for beginners and models
- Watch out for:
- Fewer FPV receivers
- Multi-protocol module
- Strengths:
- Binds to many receivers
- Watch out for:
- Setup is more complex
Hardware to look at
Hall-effect sensors do not wear out like potentiometers. If you fly a lot, replacement gimbals are an easy upgrade.
compact radios (such as pocket-size ones) travel easily; full-size radios give room for the thumbs and more switches.
you need at least an arm switch, a mode switch and a spare. More switches help with complex models.
check whether the radio uses removable 18650 cells or an internal battery, and how it charges.
colour touch screens are easier to set up; monochrome displays are cheaper and last longer on battery.
EdgeTX and simulators
EdgeTX lets you name models, set mixes, show telemetry and run Lua scripts. Most hobby radios include a USB mode in which the transmitter acts as a joystick, so you can practise in an FPV simulator before the first flight. Practice in a simulator is the cheapest way to learn.
First setup steps
- 1Charge the radio and update the firmware if needed.
- 2Create a model, choose the protocol and bind the receiver.
- 3Set up the arm and mode switches in the flight controller software.
- 4Configure the failsafe so the model does the right thing if the link is lost.
- 5Do a range test with the props off.
- 6Check your local regulations for drones; 2.4 GHz is licence-free in most countries, while sub-GHz bands vary.
Try it: Link budget fspl calculator
Change the values and the diagram and results update as you type.
Common mistakes to avoid
- Buying a radio without checking the receiver protocol.
- Forgetting to set a failsafe.
- Flying a first flight with the props on during setup.
- Choosing a radio with too few switches.
- Mixing ELRS firmware versions between radio and receiver.
Frequently asked questions
What is ExpressLRS?
An open-source radio link with very low latency and long range. Many FPV pilots use it.
Do I need EdgeTX?
Not strictly, but it gives much more control and is the standard on most FPV radios.
Can one radio fly drones and planes?
Yes, a stick radio with enough channels and switches handles both with separate model memories.
Which is best for a beginner?
Any radio with your chosen protocol, Hall gimbals, EdgeTX and a USB joystick mode for a simulator.
What does a surface radio do?
A wheel and trigger radio for RC cars, crawlers and boats. It is more natural than sticks for steering.
Parts for this guide
Calculators
Terms in this guide
Projects that use it
Put this into practice: 1 step-by-step build in our project library uses parts from this guide.
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.




