Component guide · Intermediate · 5 min read
S-Type and Industrial Load Cells

SOP SOP601 Single Point 5kg to 50kg, SOPX-306 200kg, SOPLY S-Type 100kg to 1 Ton, SOPLY-104 with Feet, SOPMH and SOPMK, YZC-516C 100kg and 200kg IP66
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Industrial load cells are sealed steel or aluminium cells with a calibrated 2 mV/V output. Single point cells like SOP601 carry a whole platform on one cell. S-type cells such as SOPLY and YZC-516C work in tension or compression, so they suit hanging loads, crane and tank weighing and test rigs. Read them with an HX711 for hobby use or a weighing indicator for trade.
Key specs at a glance
- Capacity
- 5kg to 1 ton
- Output
- 1.0 to 2.0 mV/V, calibrated
- Accuracy
- 0.02% to 0.3% FS by model
- Excitation
- 5 to 15V DC
- Protection
- IP65 to IP66 on most
- Mounting
- Single point bolts, S-type M12 to M20 threaded ends or rod-end joints
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1SOP SOP601-10kg Single Point Load Cell Sensor, 2.0mV/V, 0.02% Precision₹2,669
Option 2SOP SOP601-50kg Single Point Load Cell Sensor, 2.0 ± 0.15 mV/V, 0.02%, IP65, Aluminum Alloy₹3,199
Option 3SOP SOP601-5kg Single Point Load Cell Sensor, 2.0mV/V, ±0.02%, IP65, Aluminum Alloy₹2,669
Option 4SOP SOPLY-101-1T S-Type Load Cell Sensor, 1 Ton Capacity, 2.0mV/V Output, Alloy Steel, 5~15V Excitation, 3M Cable₹5,849
Option 5SOP SOPLY-102-50KG Load Cell Sensor 50kg Capacity Alloy Steel – 2.0mV/V Output, 2m Cable₹4,019
Option 6SOP SOPLY-103-1T Load Cell Sensor, 1 Ton Capacity, 2.0mV/V Output, Alloy Steel, 5~15V Excitation, 2m Cable₹4,199
What the S-type, single point and industrial load cells (SOP and YZC-516C) is
S-type and industrial load cells measure tension and compression forces from tens of kilograms to tonnes, for hanging scales, test rigs and process weighing.
Choose single point cells for platform and bench scales, and pick the platform size the data sheet allows. Use S-type cells where the load hangs or pulls, fitted with rod-end bearings so there is no side load. SOPLY-104 has feet for floor or tank legs.
With an HX711 on 5V excitation, a 2 mV/V cell gives only 10 mV at full load, so use the HX711's 128 gain channel and keep the cable shielded. For legal trade weighing you need a certified indicator and a stamped cell, not a hobby setup.
S-type, single point and industrial load cells (SOP and YZC-516C) pinout
The pins on the S-type, single point and industrial load cells (SOP and YZC-516C) and what each one does.
| Pin | Function |
|---|---|
| Red | E+ (excitation +) |
| Black | E- (excitation -) |
| Green | S+ or A+ (signal +) |
| White | S- or A- (signal -) |
| Shield | Bare or yellow wire, to GND (optional) |
- Red
- E+ (excitation +)
- Black
- E- (excitation -)
- Green
- S+ or A+ (signal +)
- White
- S- or A- (signal -)
- Shield
- Bare or yellow wire, to GND (optional)
Wiring the S-type, single point and industrial load cells (SOP and YZC-516C)
Six-wire cells add sense+ and sense- wires: join sense+ to E+ and sense- to E- at the HX711 if it has no sense inputs.
| S-type, single point and industrial load cells (SOP and YZC-516C) pin | Connection | Note |
|---|---|---|
| Red | E+ | HX711 excitation |
| Black | E- | HX711 ground side |
| Green | A+ | Signal |
| White | A- | Swap A+ and A- if weight reads negative |
| HX711 DT | D3 | Data |
| HX711 SCK | D2 | Clock |
| HX711 VCC/GND | 5V / GND | Or 3.3V on ESP32 |
- Red
- Connection:
- E+
- Note:
- HX711 excitation
- Black
- Connection:
- E-
- Note:
- HX711 ground side
- Green
- Connection:
- A+
- Note:
- Signal
- White
- Connection:
- A-
- Note:
- Swap A+ and A- if weight reads negative
- HX711 DT
- Connection:
- D3
- Note:
- Data
- HX711 SCK
- Connection:
- D2
- Note:
- Clock
- HX711 VCC/GND
- Connection:
- 5V / GND
- Note:
- Or 3.3V on ESP32
Example code
Calibrate with a known weight: factor = raw reading after tare divided by the true weight. Each load cell needs its own factor.
#include "HX711.h"
const int DT_PIN = 3;
const int CLK_PIN = 2;
HX711 scale;
float factor = 420.0; // change until a known weight reads right
void setup() {
Serial.begin(9600);
scale.begin(DT_PIN, CLK_PIN);
scale.set_scale(factor);
scale.tare(); // empty platform = 0
Serial.println("Place a known weight");
}
void loop() {
Serial.print("Weight: ");
Serial.print(scale.get_units(10), 1); // average of 10 readings
Serial.println(" g");
delay(500);
}Setup and tuning
connect excitation +/-, signal +/- and shield to an HX711 or industrial transmitter.
use an HX711 for hobby use or a 4 to 20 mA transmitter for PLCs.
use rod ends so force is straight through the cell, with no side loads.
use known weights to set the scale factor.
choose a capacity above the maximum load.
What you need
Shop this list16 of 17 found in our store · ₹52,562
SOP SOP601-10kg Single Point Load Cell Sensor, 2.0mV/V, 0.02% Precision: the part this guide coversSOP SOP601-10kg Single Point Load Cell Sensor, 2.0mV/V, 0.02% Precision₹2,669
SOP SOP601-50kg Single Point Load Cell Sensor, 2.0 ± 0.15 mV/V, 0.02%, IP65, Aluminum Alloy: another version this guide coversSOP SOP601-50kg Single Point Load Cell Sensor, 2.0 ± 0.15 mV/V, 0.02%, IP65, Aluminum Alloy₹3,199
SOP SOP601-5kg Single Point Load Cell Sensor, 2.0mV/V, ±0.02%, IP65, Aluminum Alloy: another version this guide coversSOP SOP601-5kg Single Point Load Cell Sensor, 2.0mV/V, ±0.02%, IP65, Aluminum Alloy₹2,669
SOP SOPLY-101-1T S-Type Load Cell Sensor, 1 Ton Capacity, 2.0mV/V Output, Alloy Steel, 5~15V Excitation, 3M Cable: another version this guide coversSOP SOPLY-101-1T S-Type Load Cell Sensor, 1 Ton Capacity, 2.0mV/V Output, Alloy Steel, 5~15V Excitation, 3M Cable₹5,849
SOP SOPLY-102-50KG Load Cell Sensor 50kg Capacity Alloy Steel – 2.0mV/V Output, 2m Cable: another version this guide coversSOP SOPLY-102-50KG Load Cell Sensor 50kg Capacity Alloy Steel – 2.0mV/V Output, 2m Cable₹4,019
SOP SOPLY-103-1T Load Cell Sensor, 1 Ton Capacity, 2.0mV/V Output, Alloy Steel, 5~15V Excitation, 2m Cable: another version this guide coversSOP SOPLY-103-1T Load Cell Sensor, 1 Ton Capacity, 2.0mV/V Output, Alloy Steel, 5~15V Excitation, 2m Cable₹4,199
SOP SOPLY-104 500kg Load Cell Sensor with Feet – 2.0mV/V Output, Alloy Steel, 5-15V Excitation, 2m Cable: another version this guide coversSOP SOPLY-104 500kg Load Cell Sensor with Feet – 2.0mV/V Output, Alloy Steel, 5-15V Excitation, 2m Cable₹4,509
SOP SOPLY-105 S-Type Load Cell Sensor 100kg, 1.0mV/V, 0.03%F.S, IP65, Stainless Steel: another version this guide coversSOP SOPLY-105 S-Type Load Cell Sensor 100kg, 1.0mV/V, 0.03%F.S, IP65, Stainless Steel₹3,539
SOP SOPMH-103 50kg Load Cell Sensor – 1.4mV/V, 0.3% F.S Accuracy: another version this guide coversSOP SOPMH-103 50kg Load Cell Sensor – 1.4mV/V, 0.3% F.S Accuracy₹5,299
SOP SOPMK-001 50kg Load Cell Sensor – 2.0mV/V, 0.1%F.S, Alloy Steel: another version this guide coversSOP SOPMK-001 50kg Load Cell Sensor – 2.0mV/V, 0.1%F.S, Alloy Steel₹7,429
SOP SOPX-306-200kg 2.0mV/V Single-Point Load Cell Sensor: another version this guide coversSOP SOPX-306-200kg 2.0mV/V Single-Point Load Cell Sensor₹3,539
YZC-516C S-Type Load Cell 200KG Capacity – Alloy Steel, IP66, 3M Cable: another version this guide coversYZC-516C S-Type Load Cell 200KG Capacity – Alloy Steel, IP66, 3M Cable₹2,429
YZC-516C S-Type Tension/Compression Load Cell 100KG Capacity – Alloy Steel, IP66: another version this guide coversYZC-516C S-Type Tension/Compression Load Cell 100KG Capacity – Alloy Steel, IP66₹2,379
HX711 24-bit load cell amplifier module: to read the load cell's millivolt signalM5Stack Weight I2C Unit (HX711) – 24-Bit Precision Load Cell Amplifier Module₹609Closest match, check the specs- Uno R3 development board: the controller used in the wiring tableFind this part
Dupont jumper wires: for the connectionsDupont Jumper Wires (40 pcs)₹49Closest match, check the specs
Digital multimeter: to check supply and signal voltagesDigital Multimeter₹177
Alternatives and when to choose them
- Bar load cells: small low-cost cells.
- TE compression load cells: button cells with amplified output.
- HX711 load cell guide: amplifier setup.
Common mistakes to avoid
- Side-loading the cell.
- Overloading beyond capacity.
- No calibration.
- Long unshielded wires.
Frequently asked questions
How do I read an S-type load cell with Arduino?
Use an HX711 amplifier board with the HX711 library and calibrate with a known weight.
Why are readings unstable?
Side loads, vibration or loose, unshielded wiring make readings unstable.
Can S-type cells measure compression and tension?
Yes. Most S-type cells measure both tension and compression.
How do I calibrate?
Zero with no load, then set the scale using a known weight.
Can I connect it to a PLC?
Yes, through a load cell transmitter with a 4 to 20 mA or 0 to 10 V output.
Parts for this guide
- ₹2,669View
- ₹3,199View
- ₹2,669View
SOP SOPLY-101-1T S-Type Load Cell Sensor, 1 Ton Capacity, 2.0mV/V Output, Alloy Steel, 5~15V Excitation, 3M Cable₹5,849View- ₹4,019View
SOP SOPLY-103-1T Load Cell Sensor, 1 Ton Capacity, 2.0mV/V Output, Alloy Steel, 5~15V Excitation, 2m Cable₹4,199View
SOP SOPLY-104 500kg Load Cell Sensor with Feet – 2.0mV/V Output, Alloy Steel, 5-15V Excitation, 2m Cable₹4,509View- ₹3,539View
- ₹5,299View
- ₹7,429View
- ₹3,539View
- ₹2,429View
- ₹2,379View
- ₹114View
- ₹359View
- ₹49View
- ₹177View
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.


