Component guide · Advanced · 4 min read
TE Connectivity Compression Load Cells

FX29K0 25lb and 50lb, FX292X and FX293X Compact (mV, Analog or I2C), FC2231 10lbf and 50lb Amplified, FC2311 500lbf and 1000lbf
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
TE compression load cells are small stainless or ceramic button sensors that measure a pushing force on a ball or button. FX29K0 and FX29xx models with the -100A or -040B codes come in raw mV, amplified 0.5 to 4.5V or I2C versions. FC22 cells give a ratiometric 0.5 to 4.5V on 5V, so they read straight into an Arduino analog pin. FC23 cells handle 500 to 1000lbf.
Key specs at a glance
- Range
- 10lbf to 1000lbf (about 4.5kg to 450kg)
- Outputs
- mV/V (FX292, FC23), 0.5-4.5V analog (FC22, FX29 amplified), I2C (FX293 digital)
- Supply
- 5V typical, 5.25-5.5V max on FX29, 10V on FC2311-1000
- Overload
- About 2.5x rated for FX29
- Size
- Compact, about 19 mm FX29
- Cable
- 4-wire ribbon or 2 ft cable
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1TE Connectivity FC2231-0000-0010-L Force Load Cell Sensor, FC22 Series, 10 lbf, 0.5 to 4.5 V, 2 ft Cable₹11,639
Option 2TE Connectivity FC2231-0000-0050-L Load Cell – Mid Range Compression, 50 lb, 5V, 0.5-4.5V Output₹14,879
Option 3TE Connectivity FC2311-0000-0500-L FC23 Series Compression Load Cell, 500 lbf, 20 mV/V Output, 5V Supply, Cable Mount₹24,309
Option 4TE Connectivity FC2311-0000-1000-L Load Cell, 1000 lbf Compression, 10V Excitation, 2ft Cable₹14,589
Option 5TE Connectivity FX292X-100A-0100-L Load Cell, Compact Compression, 100 lb, 20 mV/V, 6 V₹4,459
Option 6TE Connectivity FX293X-040B-0050-L Compression Load Cell Sensor, 50lb (22.8kg), 5.25V Excitation, 4-Wire Ribbon Cable₹8,479
What the TE Connectivity FX29, FX292, FX293, FC22 and FC23 compression load cells is
TE Connectivity compact compression load cells, such as the FX29 and FC22, are small button-style force sensors with mV, amplified analog or I2C outputs for medical devices, robotics and test rigs.
Use these for press and grip force, button and pedal force, robot end-effector contact and test fixtures. Load must arrive straight onto the sensing button through a flat, hard surface; an angled push gives low readings.
Check the part code before wiring: the letter or digit after the series tells you if the output is mV (needs an HX711 or instrumentation amp), amplified analog (read with analogRead) or I2C (address in the data sheet).
TE Connectivity FX29, FX292, FX293, FC22 and FC23 compression load cells pinout
The pins on the TE Connectivity FX29, FX292, FX293, FC22 and FC23 compression load cells and what each one does.
| Pin | Function |
|---|---|
| +Ex / VCC | 5V supply |
| -Ex / GND | Ground |
| +Out / Vout | Signal (mV+ or 0.5-4.5V) |
| -Out | mV- on bridge versions |
| SDA / SCL | I2C versions |
- +Ex / VCC
- 5V supply
- -Ex / GND
- Ground
- +Out / Vout
- Signal (mV+ or 0.5-4.5V)
- -Out
- mV- on bridge versions
- SDA / SCL
- I2C versions
Wiring the TE Connectivity FX29, FX292, FX293, FC22 and FC23 compression load cells
Do not exceed the rated supply; the amplified versions are ratiometric, so a steady 5V matters.
| TE Connectivity FX29, FX292, FX293, FC22 and FC23 compression load cells pin | Connection | Note |
|---|---|---|
| VCC | 5V | Ratiometric output |
| GND | GND | Common |
| Vout | A0 | Amplified versions |
| SDA / SCL | A4 / A5 | I2C versions, 5V logic |
- VCC
- Connection:
- 5V
- Note:
- Ratiometric output
- GND
- Connection:
- GND
- Note:
- Common
- Vout
- Connection:
- A0
- Note:
- Amplified versions
- SDA / SCL
- Connection:
- A4 / A5
- Note:
- I2C versions, 5V logic
Example code
Set FULL_LBF to your model's range. For mV versions use the HX711 code from the bar load cell guide.
const int PIN = A0;
const float FULL_LBF = 50.0; // FC2231-0000-0050-L
void setup() { Serial.begin(9600); }
void loop() {
float v = analogRead(PIN) * 5.0 / 1023.0;
float lbf = (v - 0.5) / 4.0 * FULL_LBF; // 0.5V = 0, 4.5V = full scale
if (lbf < 0) lbf = 0;
Serial.print(lbf, 2); Serial.print(" lbf ");
Serial.print(lbf * 4.448, 1); Serial.println(" N");
delay(200);
}Setup and tuning
pick mV bridge, amplified analog (0.5 to 4.5 V) or digital I2C versions.
apply force centrally on the button; avoid side loads.
mount on a flat rigid surface.
zero with no load and check with known weights.
stay below the rated overload limit.
What you need
Shop this list12 of 13 found in our store · ₹1,02,446
TE Connectivity FC2231-0000-0010-L Force Load Cell Sensor, FC22 Series, 10 lbf, 0.5 to 4.5 V, 2 ft Cable: the part this guide coversTE Connectivity FC2231-0000-0010-L Force Load Cell Sensor, FC22 Series, 10 lbf, 0.5 to 4.5 V, 2 ft Cable₹11,639
TE Connectivity FC2231-0000-0050-L Load Cell – Mid Range Compression, 50 lb, 5V, 0.5-4.5V Output: another version this guide coversTE Connectivity FC2231-0000-0050-L Load Cell – Mid Range Compression, 50 lb, 5V, 0.5-4.5V Output₹14,879
TE Connectivity FC2311-0000-0500-L FC23 Series Compression Load Cell, 500 lbf, 20 mV/V Output, 5V Supply, Cable Mount: another version this guide coversTE Connectivity FC2311-0000-0500-L FC23 Series Compression Load Cell, 500 lbf, 20 mV/V Output, 5V Supply, Cable Mount₹24,309
TE Connectivity FC2311-0000-1000-L Load Cell, 1000 lbf Compression, 10V Excitation, 2ft Cable: another version this guide coversTE Connectivity FC2311-0000-1000-L Load Cell, 1000 lbf Compression, 10V Excitation, 2ft Cable₹14,589
TE Connectivity FX292X-100A-0100-L Load Cell, Compact Compression, 100 lb, 20 mV/V, 6 V: another version this guide coversTE Connectivity FX292X-100A-0100-L Load Cell, Compact Compression, 100 lb, 20 mV/V, 6 V₹4,459
TE Connectivity FX293X-040B-0050-L Compression Load Cell Sensor, 50lb (22.8kg), 5.25V Excitation, 4-Wire Ribbon Cable: another version this guide coversTE Connectivity FX293X-040B-0050-L Compression Load Cell Sensor, 50lb (22.8kg), 5.25V Excitation, 4-Wire Ribbon Cable₹8,479
TE Connectivity FX293X-100A-0025-L Load Cell, Compact Compression, 25 lbf, mV/Analog/I2C Output: another version this guide coversTE Connectivity FX293X-100A-0025-L Load Cell, Compact Compression, 25 lbf, mV/Analog/I2C Output₹4,529
TE Connectivity FX29K0-040B-0025-L Load Cell Sensor, 25lb Capacity, 5.5V Excitation, 4-Wire Ribbon Cable: another version this guide coversTE Connectivity FX29K0-040B-0025-L Load Cell Sensor, 25lb Capacity, 5.5V Excitation, 4-Wire Ribbon Cable₹7,879
TE Connectivity FX29K0-040B-0050-L Compression Load Cell Sensor, 50lb (22.68kg) Capacity, 5.5V, 4-Wire Ribbon Cable: another version this guide coversTE Connectivity FX29K0-040B-0050-L Compression Load Cell Sensor, 50lb (22.68kg) Capacity, 5.5V, 4-Wire Ribbon Cable₹6,529
TE Connectivity FX29K0-100A-0050-L Load Cell, Compact Compression, 50 lb, 5.5 V, 0 °C to 50 °C, FX29 Series: another version this guide coversTE Connectivity FX29K0-100A-0050-L Load Cell, Compact Compression, 50 lb, 5.5 V, 0 °C to 50 °C, FX29 Series₹4,929- Uno R3 development board: the controller used in the wiring tableFind this part
Dupont jumper wires: for the connectionsDupont Jumper Wires (40 pcs)₹49Closest match, check the specs
Digital multimeter: to check supply and signal voltagesDigital Multimeter₹177
Alternatives and when to choose them
- S-type and industrial load cells: larger sealed cells.
- Tekscan FlexiForce sensors: thin film force sensing.
- HX711 load cell guide: for mV models.
Common mistakes to avoid
- Off-centre loading.
- Soft mounting surface.
- Overloading.
- Using mV versions on a plain ADC.
Frequently asked questions
Which output type should I choose?
I2C or amplified analog for microcontrollers; mV for precision amplifiers.
Why are readings unstable?
Force is off-centre or the base is not rigid.
Can I read the FX29 with Arduino?
Yes. The I2C version reads easily with the Wire library.
What happens if I overload it?
Overload can permanently damage the sensor, so keep within its rating.
Do I need to calibrate?
Zero it with no load and check the scale with known weights.
Parts for this guide
TE Connectivity FC2231-0000-0010-L Force Load Cell Sensor, FC22 Series, 10 lbf, 0.5 to 4.5 V, 2 ft Cable₹11,639View- ₹14,879View
TE Connectivity FC2311-0000-0500-L FC23 Series Compression Load Cell, 500 lbf, 20 mV/V Output, 5V Supply, Cable Mount₹24,309View- ₹14,589View
- ₹4,459View
TE Connectivity FX293X-040B-0050-L Compression Load Cell Sensor, 50lb (22.8kg), 5.25V Excitation, 4-Wire Ribbon Cable₹8,479View- ₹4,529View
TE Connectivity FX29K0-040B-0025-L Load Cell Sensor, 25lb Capacity, 5.5V Excitation, 4-Wire Ribbon Cable₹7,879View
TE Connectivity FX29K0-040B-0050-L Compression Load Cell Sensor, 50lb (22.68kg) Capacity, 5.5V, 4-Wire Ribbon Cable₹6,529View
TE Connectivity FX29K0-100A-0050-L Load Cell, Compact Compression, 50 lb, 5.5 V, 0 °C to 50 °C, FX29 Series₹4,929View- ₹359View
- ₹49View
- ₹177View
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.

