Component guide · Intermediate · 3 min read
Sensirion SDP810, SDP816, SDP31, SDP610, SDP611, Asair ADP810, ADP2000

ADP2100, Honeywell HSC and Mikroe Diff Press Click
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
These sensors measure very small pressure differences, ±125 to ±500 Pa, with high accuracy and no drift. They suit ventilation, HVAC, filter monitoring, ventilators and airspeed. The Sensirion SDP810 and SDP816 have tube ports, the SDP31 is tiny for PCB mounting, and the SDP610 and SDP611 are the earlier generation. Asair's ADP parts and Honeywell's HSC are compatible alternatives.
Key specs at a glance
- Range
- ±125 Pa (SDP810-125, ADP2000), ±500 Pa (SDP810-500, SDP31, SDP610)
- Accuracy
- About 3% of reading
- Interface
- I2C (0x25 on SDP8xx, 0x21 on SDP3x)
- Supply
- 3.0 to 5.5 V (SDP8xx), 3.3 V (SDP3x)
- Zero drift
- None (thermal flow principle)
- Ports
- Tube barbs or manifold mount
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Sensirion SDP810-500PA-D Differential Pressure Sensor, ±0.5 kPa Range, 3V-5.5V, I2C Output₹5,299
Option 2Sensirion SDP810-125PA Differential Pressure Sensor, 125 Pa, Digital I2C, Tube Port₹3,209
Option 3Sensirion SDP816-500Pa Differential Pressure Sensor Module, 3–5.5 V, −20 °C to +85 °C₹3,249
Option 4Sensirion SDP31-500PA-TR Digital Differential Pressure Sensor, I²C, 3.3V, −0.5 kPa~+0.5 kPa₹3,609
Option 5Sensirion SDP610-500PA Differential Pressure Sensor, ±500 Pa Range, I²C Digital Output, 3V-3.6V Supply₹5,099
Option 6Sensirion SDP611 Differential Pressure Sensor ±500 Pa, Analog & I2C Output₹5,959
What the Sensirion SDP, Asair ADP and Honeywell HSC differential sensors is
Sensirion SDP differential pressure sensors, such as the SDP31, SDP810 and SDP610, measure tiny pressure differences for airflow, HVAC, filter monitoring and ventilators.
Sensirion SDP sensors measure a tiny flow through the sensor, not membrane bending, which is why they have no zero offset drift.
Start continuous mode once, then read three words: pressure, temperature and a scale factor. Divide the pressure by the scale factor to get pascals.
Sensirion SDP, Asair ADP and Honeywell HSC differential sensors pinout
The pins on the Sensirion SDP, Asair ADP and Honeywell HSC differential sensors and what each one does.
| Pin | Function |
|---|---|
| VDD | Supply |
| GND | Ground |
| SDA / SCL | I2C |
| IRQn / ADDR | Interrupt or address select (some) |
- VDD
- Supply
- GND
- Ground
- SDA / SCL
- I2C
- IRQn / ADDR
- Interrupt or address select (some)
Wiring the Sensirion SDP, Asair ADP and Honeywell HSC differential sensors
Connect the Sensirion SDP, Asair ADP and Honeywell HSC differential sensors like this.
| Sensirion SDP, Asair ADP and Honeywell HSC differential sensors pin | Arduino Uno | ESP32 |
|---|---|---|
| VCC | 5V (or 3.3V) | 3V3 |
| GND | GND | GND |
| SDA | A4 | GPIO 21 |
| SCL | A5 | GPIO 22 |
- VCC
- Arduino Uno:
- 5V (or 3.3V)
- ESP32:
- 3V3
- GND
- Arduino Uno:
- GND
- ESP32:
- GND
- SDA
- Arduino Uno:
- A4
- ESP32:
- GPIO 21
- SCL
- Arduino Uno:
- A5
- ESP32:
- GPIO 22
Example code
Sensirion's Arduino libraries do the same with CRC checks. The SDP3x uses address 0x21; Asair and Honeywell parts have their own commands.
#include <Wire.h>
const uint8_t ADDR = 0x25;
void setup() {
Serial.begin(115200);
Wire.begin();
Wire.beginTransmission(ADDR); Wire.write(0x36); Wire.write(0x15); Wire.endTransmission(); // continuous, averaged
delay(20);
}
void loop() {
Wire.requestFrom(ADDR, (uint8_t)9);
int16_t dp = (Wire.read() << 8) | Wire.read(); Wire.read(); // skip CRC
int16_t t = (Wire.read() << 8) | Wire.read(); Wire.read();
int16_t sf = (Wire.read() << 8) | Wire.read(); Wire.read();
Serial.print(dp / (float)sf, 2); Serial.print(" Pa ");
Serial.print(t / 200.0, 1); Serial.println(" C");
delay(100);
}Setup and tuning
VDD 3.3 V, GND, SDA and SCL with pull-ups.
use the Sensirion SDP library for Arduino.
connect high pressure to port + and low to port -; use soft tubes.
convert pressure to flow using your duct or orifice formula.
the sensors are factory calibrated and temperature compensated.
What you need
Shop this list13 of 14 found in our store · ₹38,177
Sensirion SDP810-500PA-D Differential Pressure Sensor, ±0.5 kPa Range, 3V-5.5V, I2C Output: the part this guide coversSensirion SDP810-500PA-D Differential Pressure Sensor, ±0.5 kPa Range, 3V-5.5V, I2C Output₹5,299
Sensirion SDP810-125PA Differential Pressure Sensor, 125 Pa, Digital I2C, Tube Port: another version this guide coversSensirion SDP810-125PA Differential Pressure Sensor, 125 Pa, Digital I2C, Tube Port₹3,209
Sensirion SDP816-500Pa Differential Pressure Sensor Module, 3–5.5 V, −20 °C to +85 °C: another version this guide coversSensirion SDP816-500Pa Differential Pressure Sensor Module, 3–5.5 V, −20 °C to +85 °C₹3,249
Sensirion SDP31-500PA-TR Digital Differential Pressure Sensor, I²C, 3.3V, −0.5 kPa~+0.5 kPa: another version this guide coversSensirion SDP31-500PA-TR Digital Differential Pressure Sensor, I²C, 3.3V, −0.5 kPa~+0.5 kPa₹3,609
Sensirion SDP610-500PA Differential Pressure Sensor, ±500 Pa Range, I²C Digital Output, 3V-3.6V Supply: another version this guide coversSensirion SDP610-500PA Differential Pressure Sensor, ±500 Pa Range, I²C Digital Output, 3V-3.6V Supply₹5,099
Sensirion SDP611 Differential Pressure Sensor ±500 Pa, Analog & I2C Output: another version this guide coversSensirion SDP611 Differential Pressure Sensor ±500 Pa, Analog & I2C Output₹5,959
Asair ADP2000 Digital Differential Pressure Sensor – I2C Output, ±125 Pa Range: another version this guide coversAsair ADP2000 Digital Differential Pressure Sensor – I2C Output, ±125 Pa Range₹669
Asair ADP2100 Differential Pressure Sensor – I2C Output, -500 to +500 Pa: another version this guide coversAsair ADP2100 Differential Pressure Sensor – I2C Output, -500 to +500 Pa₹1,159
Asair ADP810 Differential Pressure Sensor – I2C Digital Output: another version this guide coversAsair ADP810 Differential Pressure Sensor – I2C Digital Output₹1,009
Honeywell HSCDRRN001ND2A3 Differential Pressure Sensor, ±1 inch H₂O, Digital I2C Output: another version this guide coversHoneywell HSCDRRN001ND2A3 Differential Pressure Sensor, ±1 inch H₂O, Digital I2C Output₹4,549
Mikroe DIFF PRESS CLICK (Mikroe-3332) – Differential Pressure Sensor Board, I²C, Range: -7 kPa~7 kPa: another version this guide coversMikroe DIFF PRESS CLICK (Mikroe-3332) – Differential Pressure Sensor Board, I²C, Range: -7 kPa~7 kPa₹3,839
ESP32-WROOM-32 38-pin development board: for Wi-Fi logging and dashboardsESP32-WROOM-32 38-Pin Development Board₹389- Uno R3 development board: the controller used in the wiring tableFind this part
0.96 inch OLED display 128x64: to show readings without a computer0.96" OLED Display 128x64₹139Closest match, check the specs
Alternatives and when to choose them
- GZP differential sensors: lower cost, higher ranges.
- TE ultra-low sensors: 125 to 300 Pa.
- Airspeed sensors: pitot use.
Common mistakes to avoid
- Swapping tubes.
- 5 V logic.
- Kinked tubing.
- Using it with liquids.
Frequently asked questions
What range do SDP sensors measure?
Typically ±125 Pa or ±500 Pa depending on model.
How do I measure airflow with it?
Use a pitot tube or orifice and convert pressure to flow.
Why is the reading negative?
The tubes are connected the wrong way round; swap them.
Do I need to calibrate?
No. They are factory calibrated and temperature compensated.
Is it 5 V tolerant?
No. Use 3.3 V logic, or a level shifter with 5 V boards.
Parts for this guide
- ₹5,299View
- ₹3,209View
- ₹3,249View
- ₹3,609View
Sensirion SDP610-500PA Differential Pressure Sensor, ±500 Pa Range, I²C Digital Output, 3V-3.6V Supply₹5,099View- ₹5,959View
- ₹669View
- ₹1,159View
- ₹1,009View
- ₹4,549View
Mikroe DIFF PRESS CLICK (Mikroe-3332) – Differential Pressure Sensor Board, I²C, Range: -7 kPa~7 kPa₹3,839View- ₹389View
- ₹359View
- ₹139View
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.

