Component guide · Advanced · 3 min read
TE Connectivity SM9333, SM9235, SM9233, SM5391, LDES050, 4515-DS5A

and MS4525DO Low and Differential Pressure Sensors
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
TE's SM9000 series and LDES sensors measure ultra-low pressures, from 50 to 300 Pa full scale, for HVAC, medical breathing devices and gas flow. They give calibrated I2C or analog output. The SM5391 covers about 0.8 to 2.5 psi, the 4515-DS5A is a module with 0.5 to 4.5 V output, and the MS4525DO is the digital sensor used in many drone airspeed kits.
Key specs at a glance
- Range
- 50 Pa (LDES050), 125 Pa (SM9333), 250 to 300 Pa (SM9233, SM9235), up to 15 psi (MS4525DO)
- Output
- I2C, SPI or analog depending on part
- Supply
- 3 to 5.5 V (SM93xx), 3.3 V (MS4525DO-SS3), 5 V (LDES, 4515)
- Accuracy
- About ±0.5 to 1.5% FS
- Package
- SOIC-16, SMD or module
- Use
- HVAC, medical, airspeed, gas flow
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1TE Connectivity SM9333-BCE-S-125-002 Digital Pressure Sensor, DIFF, 125Pa, I2C/SPI₹5,059
Option 2TE Connectivity SM9235-BCE-S-300-000 Ultra-Low Pressure Sensor, Gauge, 0-300 Pa, Digital I2C, SOIC-16₹4,549
Option 3TE Connectivity SM9235-BCE-S-300-002 Pressure Sensor, SMI, Gauge, 0-300 Pa, 3-5.5V, SOIC₹4,569
Option 4TE Connectivity SM9233-BCE-T-300-000 Pressure Sensor, Gauge, 0 to +250 Pa, 3-5.5V, SOIC-16₹6,229
Option 5TE Connectivity SM5391-BCE-S-012.00-451 Differential Pressure Sensor, 0.8-2.49 psi, Dual Analog & I2C Digital Output, SOIC-16 Package₹2,319
Option 6TE Connectivity LDES050UE6S Differential Pressure Sensor, 0–50 Pa, 5 V, Unidirectional, SMD, LDE Series₹6,369
What the TE SM9333, SM9235, MS4525DO and ultra-low pressure sensors is
TE ultra-low differential pressure sensors measure very small pressure differences, a few pascals to a few hundred, for HVAC, cleanrooms and airflow monitoring.
Ultra-low sensors pick up tiny changes in tube position and temperature, so fix the tubes, keep them equal and zero the sensor regularly.
The MS4525DO in the airspeed kits uses address 0x28 and is supported directly by ArduPilot and PX4.
TE SM9333, SM9235, MS4525DO and ultra-low pressure sensors pinout
The pins on the TE SM9333, SM9235, MS4525DO and ultra-low pressure sensors and what each one does.
| Pin | Function |
|---|---|
| VDD | Supply |
| GND | Ground |
| SDA / SCL | I2C |
| OUT | Analog (some) |
| P1 / P2 | Pressure ports |
- VDD
- Supply
- GND
- Ground
- SDA / SCL
- I2C
- OUT
- Analog (some)
- P1 / P2
- Pressure ports
Wiring the TE SM9333, SM9235, MS4525DO and ultra-low pressure sensors
SOIC parts need a PCB; the 4515-DS5A module gives an analog voltage instead.
| TE SM9333, SM9235, MS4525DO and ultra-low pressure sensors pin | Arduino Uno | ESP32 |
|---|---|---|
| VCC | 5V (or 3.3V) | 3V3 |
| GND | GND | GND |
| SDA | A4 | GPIO 21 |
| SCL | A5 | GPIO 22 |
- VCC
- Arduino Uno:
- 5V (or 3.3V)
- ESP32:
- 3V3
- GND
- Arduino Uno:
- GND
- ESP32:
- GND
- SDA
- Arduino Uno:
- A4
- ESP32:
- GPIO 21
- SCL
- Arduino Uno:
- A5
- ESP32:
- GPIO 22
Example code
Set PMIN and PMAX for your part (for -15 to 0 psi, PMIN = -15, PMAX = 0). The SM93xx parts have their own register map.
#include <Wire.h>
const uint8_t ADDR = 0x28;
const float PMAX = 1.0, PMIN = -1.0; // psi range of your part (e.g. 001D = +-1 psi)
void setup() { Serial.begin(115200); Wire.begin(); }
void loop() {
Wire.requestFrom(ADDR, (uint8_t)4);
uint8_t b0 = Wire.read(), b1 = Wire.read(), b2 = Wire.read(), b3 = Wire.read();
uint8_t status = b0 >> 6;
uint16_t p = ((b0 & 0x3F) << 8) | b1;
uint16_t t = (b2 << 3) | (b3 >> 5);
float psi = (p - 1638.4) * (PMAX - PMIN) / 13107.2 + PMIN; // 10% to 90% transfer
float c = t * 200.0 / 2047 - 50;
Serial.printf("status %d %.4f psi %.1f C\n", status, psi, c);
delay(100);
}Setup and tuning
connect high and low pressure tubes correctly.
read I2C, SPI or analog output as specified.
zero the sensor with both ports open after warm-up.
mount in the same orientation used for zeroing.
use short soft tubes without kinks.
What you need
Shop this list10 of 11 found in our store · ₹40,321
TE Connectivity SM9333-BCE-S-125-002 Digital Pressure Sensor, DIFF, 125Pa, I2C/SPI: the part this guide coversTE Connectivity SM9333-BCE-S-125-002 Digital Pressure Sensor, DIFF, 125Pa, I2C/SPI₹5,059
TE Connectivity SM9235-BCE-S-300-000 Ultra-Low Pressure Sensor, Gauge, 0-300 Pa, Digital I2C, SOIC-16: another version this guide coversTE Connectivity SM9235-BCE-S-300-000 Ultra-Low Pressure Sensor, Gauge, 0-300 Pa, Digital I2C, SOIC-16₹4,549
TE Connectivity SM9235-BCE-S-300-002 Pressure Sensor, SMI, Gauge, 0-300 Pa, 3-5.5V, SOIC: another version this guide coversTE Connectivity SM9235-BCE-S-300-002 Pressure Sensor, SMI, Gauge, 0-300 Pa, 3-5.5V, SOIC₹4,569
TE Connectivity SM9233-BCE-T-300-000 Pressure Sensor, Gauge, 0 to +250 Pa, 3-5.5V, SOIC-16: another version this guide coversTE Connectivity SM9233-BCE-T-300-000 Pressure Sensor, Gauge, 0 to +250 Pa, 3-5.5V, SOIC-16₹6,229
TE Connectivity SM5391-BCE-S-012.00-451 Differential Pressure Sensor, 0.8-2.49 psi, Dual Analog & I2C Digital Output, SOIC-16 Package: another version this guide coversTE Connectivity SM5391-BCE-S-012.00-451 Differential Pressure Sensor, 0.8-2.49 psi, Dual Analog & I2C Digital Output, SOIC-16 Package₹2,319
TE Connectivity LDES050UE6S Differential Pressure Sensor, 0–50 Pa, 5 V, Unidirectional, SMD, LDE Series: another version this guide coversTE Connectivity LDES050UE6S Differential Pressure Sensor, 0–50 Pa, 5 V, Unidirectional, SMD, LDE Series₹6,369
TE Connectivity 4515-DS5A002DP Differential Pressure Sensor Module, 2-30 Inch-H2O, 0.5-4.5V Ratiometric Output, 5V DC, 8-Pin DIP: another version this guide coversTE Connectivity 4515-DS5A002DP Differential Pressure Sensor Module, 2-30 Inch-H2O, 0.5-4.5V Ratiometric Output, 5V DC, 8-Pin DIP₹6,279
TE Connectivity MS4525DO-SS3BS015VPF Pressure Sensor, Vacuum, -15 psi to 0 psi, 3.3 VDC, Digital I2C/SPI, PCB Mount: another version this guide coversTE Connectivity MS4525DO-SS3BS015VPF Pressure Sensor, Vacuum, -15 psi to 0 psi, 3.3 VDC, Digital I2C/SPI, PCB Mount₹4,539
ESP32-WROOM-32 38-pin development board: for Wi-Fi logging and dashboardsESP32-WROOM-32 38-Pin Development Board₹389- Uno R3 development board: the controller used in the wiring tableFind this part
4-channel logic level converter (BSS138): to connect 5 V and 3.3 V signals safely4-Channel Logic Level Converter (BSS138)₹20
Alternatives and when to choose them
- Sensirion SDP: zero-drift flow principle.
- GZP differential: lower cost.
- Airspeed sensors: drone kits.
Common mistakes to avoid
- Swapping tubes.
- Skipping zero.
- Kinked tubing.
- Using with liquids.
Frequently asked questions
What range do ultra-low pressure sensors cover?
From about ±25 Pa up to a few hundred pascals.
Why does the reading drift?
Warm-up, changes in orientation or temperature changes cause drift.
How do I measure cleanroom pressure?
Connect one port inside and the other outside the room.
Why are readings negative?
The high and low pressure tubes are swapped.
Can I use it with liquids?
No. Use them with clean, dry air or gas only.
Parts for this guide
- ₹5,059View
TE Connectivity SM9235-BCE-S-300-000 Ultra-Low Pressure Sensor, Gauge, 0-300 Pa, Digital I2C, SOIC-16₹4,549View- ₹4,569View
- ₹6,229View
TE Connectivity SM5391-BCE-S-012.00-451 Differential Pressure Sensor, 0.8-2.49 psi, Dual Analog & I2C Digital Output, SOIC-16 Package₹2,319View
TE Connectivity LDES050UE6S Differential Pressure Sensor, 0–50 Pa, 5 V, Unidirectional, SMD, LDE Series₹6,369View
TE Connectivity 4515-DS5A002DP Differential Pressure Sensor Module, 2-30 Inch-H2O, 0.5-4.5V Ratiometric Output, 5V DC, 8-Pin DIP₹6,279View
TE Connectivity MS4525DO-SS3BS015VPF Pressure Sensor, Vacuum, -15 psi to 0 psi, 3.3 VDC, Digital I2C/SPI, PCB Mount₹4,539View- ₹389View
- ₹359View
- ₹20View
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.

