Component guide · Intermediate · 4 min read
Sencoch GZP6891, GZP6897 and GZP6899 Low Differential Pressure Sensors

±0.5 to ±10 kPa), Analog and I2C
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
These sensors measure a small difference in pressure between two ports, from ±0.5 kPa up to 10 kPa. Use them for airflow in ducts, filter clogging, breathing devices, HVAC and pitot tubes. The A versions give a voltage and the D versions give I2C readings at 3.3 V. The higher port is usually marked P1 or H; connect it to the side with the higher pressure.
Key specs at a glance
- Range
- ±0.5, ±1, ±2.5 kPa; 0 to 10 kPa (GZP6899A010)
- Output
- Analog 0.5 to 4.5 V (A) or I2C (D)
- Supply
- 5 V (A) or 3.3 V (D)
- Ports
- Two barbed ports, high and low
- Accuracy
- About ±1.5 to 2.5% FS
- Media
- Clean, dry air
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Sencoch GZP6897D001KPW Pressure Sensor, 3.3V, I2C Output, Ultra-Low Power (100 nA), -1 kPa~+1 kPa, SOP-8₹1,009
Option 2Sencoch GZP6891A001KPW50K Pressure Sensor, SOIC-16 PCB Mount, Analog Output, -1 kPa to +1 kPa₹829
Option 3Sencoch GZP6891D0.5KPW Pressure Sensor, SOIC-16 Package, RoHS, Range: -0.5 kPa~0.5 kPa₹799
Option 4Sencoch GZP6891D001KPW Differential Pressure Sensor, I²C Digital Output, 2.7V~5.5V, SOIC-16, Range: -1kPa ~ 1kPa₹829
Option 5Sencoch GZP6891D005KPW SOIC-16 Differential Pressure Sensor, −5 kPa ~ 5 kPa, I²C Digital Output, 3 V ~ 5.5 V₹769
Option 6Sencoch GZP6897A0.5KPW50K Pressure Sensor, -0.5 kPa to 0.5 kPa Range, 5V Analog Output, SOP-8 Package₹1,049
What the GZP6891, GZP6897 and GZP6899 low differential pressure sensors is
GZP low differential pressure sensors measure tiny pressure differences, often a few hundred pascals, for air flow, filter monitoring, HVAC and fume hoods.
For flow, measure the pressure drop across an orifice or the dynamic pressure from a pitot tube; flow is roughly proportional to the square root of the pressure difference.
For filter monitoring, put one port either side of the filter and alarm when the difference rises.
GZP6891, GZP6897 and GZP6899 low differential pressure sensors pinout
The pins on the GZP6891, GZP6897 and GZP6899 low differential pressure sensors and what each one does.
| Pin | Function |
|---|---|
| VDD | Supply |
| GND | Ground |
| OUT | Analog (A) |
| SDA / SCL | I2C (D) |
| P1 / P2 | High and low ports |
- VDD
- Supply
- GND
- Ground
- OUT
- Analog (A)
- SDA / SCL
- I2C (D)
- P1 / P2
- High and low ports
Wiring the GZP6891, GZP6897 and GZP6899 low differential pressure sensors
D versions as above at 3.3 V. A versions connect OUT to an analog pin like the GZP analog guide.
| GZP6891, GZP6897 and GZP6899 low differential pressure sensors pin | Arduino Uno | ESP32 |
|---|---|---|
| VCC | 5V (or 3.3V) | 3V3 |
| GND | GND | GND |
| SDA | A4 | GPIO 21 |
| SCL | A5 | GPIO 22 |
- VCC
- Arduino Uno:
- 5V (or 3.3V)
- ESP32:
- 3V3
- GND
- Arduino Uno:
- GND
- ESP32:
- GND
- SDA
- Arduino Uno:
- A4
- ESP32:
- GPIO 21
- SCL
- Arduino Uno:
- A5
- ESP32:
- GPIO 22
Example code
Use the K value for your range; the reading is signed, so negative means P2 is higher.
// GZP68xxD / XGZP-style I2C pressure sensor at 0x6D
#include <Wire.h>
const uint8_t ADDR = 0x6D;
const float K = 64; // range factor from the datasheet table (depends on full scale)
void wr(uint8_t r, uint8_t v) { Wire.beginTransmission(ADDR); Wire.write(r); Wire.write(v); Wire.endTransmission(); }
uint8_t rd(uint8_t r) { Wire.beginTransmission(ADDR); Wire.write(r); Wire.endTransmission(false); Wire.requestFrom(ADDR, (uint8_t)1); return Wire.read(); }
void setup() { Serial.begin(115200); Wire.begin(); }
void loop() {
wr(0x30, 0x0A); // start pressure + temperature conversion
while (rd(0x30) & 0x08) delay(1); // wait for conversion to finish
long p = ((long)rd(0x06) << 16) | ((long)rd(0x07) << 8) | rd(0x08);
if (p & 0x800000) p -= 0x1000000; // signed 24-bit
int t = (rd(0x09) << 8) | rd(0x0A);
Serial.print("Pressure "); Serial.print(p / K, 1); Serial.print(" Pa Temp ");
Serial.print(t / 256.0, 1); Serial.println(" C");
delay(200);
}Setup and tuning
connect the high-pressure port (P+) and low-pressure port (P-) with soft tubing.
read the output with both ports open and store it as the zero offset.
analog models give a voltage; digital models use I2C.
mount the sensor in the same position used for zeroing.
average readings because small pressures are noisy.
What you need
Shop this list17 of 18 found in our store · ₹17,234
Sencoch GZP6897D001KPW Pressure Sensor, 3.3V, I2C Output, Ultra-Low Power (100 nA), -1 kPa~+1 kPa, SOP-8: the part this guide coversSencoch GZP6897D001KPW Pressure Sensor, 3.3V, I2C Output, Ultra-Low Power (100 nA), -1 kPa~+1 kPa, SOP-8₹1,009
Sencoch GZP6891A001KPW50K Pressure Sensor, SOIC-16 PCB Mount, Analog Output, -1 kPa to +1 kPa: another version this guide coversSencoch GZP6891A001KPW50K Pressure Sensor, SOIC-16 PCB Mount, Analog Output, -1 kPa to +1 kPa₹829
Sencoch GZP6891D0.5KPW Pressure Sensor, SOIC-16 Package, RoHS, Range: -0.5 kPa~0.5 kPa: another version this guide coversSencoch GZP6891D0.5KPW Pressure Sensor, SOIC-16 Package, RoHS, Range: -0.5 kPa~0.5 kPa₹799
Sencoch GZP6891D001KPW Differential Pressure Sensor, I²C Digital Output, 2.7V~5.5V, SOIC-16, Range: -1kPa ~ 1kPa: another version this guide coversSencoch GZP6891D001KPW Differential Pressure Sensor, I²C Digital Output, 2.7V~5.5V, SOIC-16, Range: -1kPa ~ 1kPa₹829
Sencoch GZP6891D005KPW SOIC-16 Differential Pressure Sensor, −5 kPa ~ 5 kPa, I²C Digital Output, 3 V ~ 5.5 V: another version this guide coversSencoch GZP6891D005KPW SOIC-16 Differential Pressure Sensor, −5 kPa ~ 5 kPa, I²C Digital Output, 3 V ~ 5.5 V₹769
Sencoch GZP6897A0.5KPW50K Pressure Sensor, -0.5 kPa to 0.5 kPa Range, 5V Analog Output, SOP-8 Package: another version this guide coversSencoch GZP6897A0.5KPW50K Pressure Sensor, -0.5 kPa to 0.5 kPa Range, 5V Analog Output, SOP-8 Package₹1,049
Sencoch GZP6897A001KPW50K Pressure Sensor, 5V Analog Output, -1 kPa to +1 kPa Range, SOP-8 Package: another version this guide coversSencoch GZP6897A001KPW50K Pressure Sensor, 5V Analog Output, -1 kPa to +1 kPa Range, SOP-8 Package₹1,049
Sencoch GZP6897A2.5KPW50K Gauge Pressure Sensor, 5V Supply, 1.8 mA, -30°C to +85°C, DIP-6, Range: -2.5 kPa~2.5 kPa: another version this guide coversSencoch GZP6897A2.5KPW50K Gauge Pressure Sensor, 5V Supply, 1.8 mA, -30°C to +85°C, DIP-6, Range: -2.5 kPa~2.5 kPa₹1,049
Sencoch GZP6897D0.5KPW Digital Air Pressure Sensor, 3.3V, 100nA, I2C, SOP-8 (Range: -0.5kPa~0.5kPa): another version this guide coversSencoch GZP6897D0.5KPW Digital Air Pressure Sensor, 3.3V, 100nA, I2C, SOP-8 (Range: -0.5kPa~0.5kPa)₹1,249
Sencoch GZP6897D2.5KPW Pressure Sensor, 3.3V I²C Output, -2.5 kPa~+2.5 kPa Range, SOP-8 Package: another version this guide coversSencoch GZP6897D2.5KPW Pressure Sensor, 3.3V I²C Output, -2.5 kPa~+2.5 kPa Range, SOP-8 Package₹1,059
Sencoch GZP6899A0.5KPW50K Pressure Sensor, −0.5 kPa ~ 0.5 kPa, 5V Analog Output, SOP-8 Package: another version this guide coversSencoch GZP6899A0.5KPW50K Pressure Sensor, −0.5 kPa ~ 0.5 kPa, 5V Analog Output, SOP-8 Package₹1,209
Sencoch GZP6899A010KPP50T Differential Pressure Sensor, 0-10 kPa Range, 5V Supply, SOP-8 Package: another version this guide coversSencoch GZP6899A010KPP50T Differential Pressure Sensor, 0-10 kPa Range, 5V Supply, SOP-8 Package₹1,329
Sencoch GZP6899D0.5KPW Pressure Sensor, -0.5 kPa to +0.5 kPa Range, 3.3V I2C Output, SOP-8 Package: another version this guide coversSencoch GZP6899D0.5KPW Pressure Sensor, -0.5 kPa to +0.5 kPa Range, 3.3V I2C Output, SOP-8 Package₹1,259
Sencoch GZP6899D001KPW Pressure Sensor, 3.3V, 100nA, I2C, Range: -1 kPa to 1 kPa, SOP-8 Package: another version this guide coversSencoch GZP6899D001KPW Pressure Sensor, 3.3V, 100nA, I2C, Range: -1 kPa to 1 kPa, SOP-8 Package₹2,149
Sencoch GZP6899D002KPW MEMS Pressure Sensor, SOP-8 Package, I2C Interface: another version this guide coversSencoch GZP6899D002KPW MEMS Pressure Sensor, SOP-8 Package, I2C Interface₹1,189
ESP32-WROOM-32 38-pin development board: for Wi-Fi logging and dashboardsESP32-WROOM-32 38-Pin Development Board₹389- Uno R3 development board: the controller used in the wiring tableFind this part
4-channel logic level converter (BSS138): to connect 5 V and 3.3 V signals safely4-Channel Logic Level Converter (BSS138)₹20
Alternatives and when to choose them
- Sensirion SDP: very low range and high accuracy.
- TE ultra-low pressure: 125 to 300 Pa sensors.
- Airspeed sensors: pitot set-ups.
Common mistakes to avoid
- Swapping the P+ and P- tubes.
- Skipping the zero offset.
- Using it with liquids.
- Reading single samples instead of averaging.
Frequently asked questions
What does a differential pressure sensor measure?
The difference between two pressures, such as across a filter.
How do I measure airflow with it?
Use a pitot tube or orifice and convert pressure to flow.
Why does the reading not start at zero?
There is an offset; read with both ports open and subtract it.
Does the sensor orientation matter?
Very sensitive sensors can show small offsets when tilted, so zero in place.
Can I use it with water?
No. These sensors are for clean, dry air only.
Parts for this guide
Sencoch GZP6897D001KPW Pressure Sensor, 3.3V, I2C Output, Ultra-Low Power (100 nA), -1 kPa~+1 kPa, SOP-8₹1,009View- ₹829View
- ₹799View
Sencoch GZP6891D001KPW Differential Pressure Sensor, I²C Digital Output, 2.7V~5.5V, SOIC-16, Range: -1kPa ~ 1kPa₹829View
Sencoch GZP6891D005KPW SOIC-16 Differential Pressure Sensor, −5 kPa ~ 5 kPa, I²C Digital Output, 3 V ~ 5.5 V₹769View
Sencoch GZP6897A0.5KPW50K Pressure Sensor, -0.5 kPa to 0.5 kPa Range, 5V Analog Output, SOP-8 Package₹1,049View- ₹1,049View
Sencoch GZP6897A2.5KPW50K Gauge Pressure Sensor, 5V Supply, 1.8 mA, -30°C to +85°C, DIP-6, Range: -2.5 kPa~2.5 kPa₹1,049View- ₹1,249View
- ₹1,059View
- ₹1,209View
- ₹1,329View
- ₹1,259View
- ₹2,149View
- ₹1,189View
- ₹389View
- ₹359View
- ₹20View
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.

