Component guide · Beginner · 4 min read
Force Sensing Resistors

SOUSHINE FSR400, FSR402, FSR406, FSR407, FSR408, FSR410, FSR411, FSR412, SBR Film and NH001 Seat Sensor, Ohmite FSR, Grove Round Force Sensor and DFRobot Thin Circular Flex Force Sensor
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
These are the classic force sensing resistors in standard sizes: FSR400 has a 5.6mm dot, FSR402 a 14.7mm circle, FSR406 a 39.7mm square, FSR408 a 100mm strip and FSR412 a tiny 3mm dot. All read the same way: a divider with a 10k resistor into an analog pin. The NH001 is a seat occupancy switch, and the Grove module adds the divider for you.
Key specs at a glance
- Sizes
- 3mm (FSR412) to 39.7mm square (FSR406) and 100mm strip (FSR408)
- Range
- About 20g to 10kg; SBR film to 15kg
- Tails
- Short or long tail versions
- NH001
- On/off seat detection film
- Grove FSR402
- Divider on board, analog out, 3.3-5V
- DFRobot circular
- 0.45mm, 20g-6kg, 120°C rated
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1SOUSHINE FSR400 Long Tail 5.6mm Force Sensing Resistor (30g-10kg)₹195
Option 2SOUSHINE FSR400-short tail, 5.6 mm, Force Sensing Resistor (30g-10Kg)₹203
Option 3SOUSHINE FSR402 Short Tail Force Sensing Resistor (20g-10Kg) – 14.7mm Active Area, IP65₹195
Option 4SOUSHINE FSR402-long tail 14.7mm Force Sensing Resistor (20g-10Kg) – Flexible Thin-Film₹259
Option 5SOUSHINE FSR406 Force Sensitive Resistor 39.7mm Active Area 20g–10Kg Pressure Sensor₹379
Option 6SOUSHINE FSR406 Long Tail Force Sensing Resistor 39.7×39.7mm (50g-10kg) – TTL Compatible₹379
What the SOUSHINE FSR400 to FSR412, Ohmite, Grove and DFRobot force sensing resistors is
Soushine FSR400 series force sensors are round and square force-sensing resistors whose resistance falls with pressure, for touch, grip and impact detection.
Pick the size that matches the thing pressing on it: a fingertip suits FSR402, a foot or seat suits FSR406 or the SBR film, and a robot finger suits FSR400 or FSR412. The long-tail versions let you keep electronics away from the pad.
Use the NH001 or a threshold on any FSR for yes/no presence. For a press-level reading, average several samples and calibrate against known weights. The Grove module plugs into a Grove shield and needs no extra parts.
SOUSHINE FSR400 to FSR412, Ohmite, Grove and DFRobot force sensing resistors pinout
The pins on the SOUSHINE FSR400 to FSR412, Ohmite, Grove and DFRobot force sensing resistors and what each one does.
| Pin | Function |
|---|---|
| Lead 1 | To 5V (no polarity) |
| Lead 2 | To the analog pin and the fixed resistor |
| Fixed resistor | 10k to GND (3.3k for heavy loads, 47k for light touch) |
| Tail | Do not bend at the sensing area |
| Connector | Bare pins, female housing or crimp on most |
- Lead 1
- To 5V (no polarity)
- Lead 2
- To the analog pin and the fixed resistor
- Fixed resistor
- 10k to GND (3.3k for heavy loads, 47k for light touch)
- Tail
- Do not bend at the sensing area
- Connector
- Bare pins, female housing or crimp on most
Wiring the SOUSHINE FSR400 to FSR412, Ohmite, Grove and DFRobot force sensing resistors
The Grove module already has the divider: SIG to A0, VCC and GND only.
| SOUSHINE FSR400 to FSR412, Ohmite, Grove and DFRobot force sensing resistors pin | Connection | Note |
|---|---|---|
| FSR lead 1 | 5V | Or 3.3V |
| FSR lead 2 | A0 | Divider middle |
| 10k resistor | A0 to GND | Pull-down |
- FSR lead 1
- Connection:
- 5V
- Note:
- Or 3.3V
- FSR lead 2
- Connection:
- A0
- Note:
- Divider middle
- 10k resistor
- Connection:
- A0 to GND
- Note:
- Pull-down
Example code
FSRs are not precise scales. Calibrate the level against a few known weights and expect about 10% repeatability.
const int FSR = A0;
const float R_FIXED = 10000.0; // pull-down resistor
void setup() { Serial.begin(9600); }
void loop() {
int raw = analogRead(FSR);
if (raw < 10) { Serial.println("No press"); delay(200); return; }
float v = raw * 5.0 / 1023.0;
float rFsr = R_FIXED * (5.0 - v) / v; // FSR resistance in ohms
float g = 1.0 / rFsr; // conductance rises roughly with force
Serial.print("R = "); Serial.print(rFsr, 0);
Serial.print(" ohm, level = "); Serial.println(g * 1e6, 1);
delay(200);
}Setup and tuning
pair with a 10 kΩ resistor and read the midpoint on an analog pin.
press inside the active area; use a pad for even force.
use connectors or clips; do not solder near the film.
map readings to force with known weights for rough results.
expect drift and variation between sensors.
What you need
Shop this list19 of 20 found in our store · ₹7,154
SOUSHINE FSR400 Long Tail 5.6mm Force Sensing Resistor (30g-10kg): the part this guide coversSOUSHINE FSR400 Long Tail 5.6mm Force Sensing Resistor (30g-10kg)₹195
SOUSHINE FSR400-short tail, 5.6 mm, Force Sensing Resistor (30g-10Kg): another version this guide coversSOUSHINE FSR400-short tail, 5.6 mm, Force Sensing Resistor (30g-10Kg)₹203
SOUSHINE FSR402 Short Tail Force Sensing Resistor (20g-10Kg) – 14.7mm Active Area, IP65: another version this guide coversSOUSHINE FSR402 Short Tail Force Sensing Resistor (20g-10Kg) – 14.7mm Active Area, IP65₹195
SOUSHINE FSR402-long tail 14.7mm Force Sensing Resistor (20g-10Kg) – Flexible Thin-Film: another version this guide coversSOUSHINE FSR402-long tail 14.7mm Force Sensing Resistor (20g-10Kg) – Flexible Thin-Film₹259
SOUSHINE FSR406 Force Sensitive Resistor 39.7mm Active Area 20g–10Kg Pressure Sensor: another version this guide coversSOUSHINE FSR406 Force Sensitive Resistor 39.7mm Active Area 20g–10Kg Pressure Sensor₹379
SOUSHINE FSR406 Long Tail Force Sensing Resistor 39.7×39.7mm (50g-10kg) – TTL Compatible: another version this guide coversSOUSHINE FSR406 Long Tail Force Sensing Resistor 39.7×39.7mm (50g-10kg) – TTL Compatible₹379
SOUSHINE FSR407 Force Sensing Resistor (20g-10kg) – Flexible Leads: another version this guide coversSOUSHINE FSR407 Force Sensing Resistor (20g-10kg) – Flexible Leads₹409
SOUSHINE FSR408 Force Sensing Resistor 15mm x 100mm (30g-10kg) – Polymer Thick Film: another version this guide coversSOUSHINE FSR408 Force Sensing Resistor 15mm x 100mm (30g-10kg) – Polymer Thick Film₹269
SOUSHINE FSR410 25.42mm Force Sensing Resistor (30g-10kg) – Flexible Film Sensor: another version this guide coversSOUSHINE FSR410 25.42mm Force Sensing Resistor (30g-10kg) – Flexible Film Sensor₹399
SOUSHINE FSR411 7.5mm Force Sensing Resistor (50g-10kg): another version this guide coversSOUSHINE FSR411 7.5mm Force Sensing Resistor (50g-10kg)₹229
SOUSHINE FSR412 3mm Force Sensing Resistor (70g-10kg): another version this guide coversSOUSHINE FSR412 3mm Force Sensing Resistor (70g-10kg)₹203
SOUSHINE NH001 Seat Occupancy Pressure Sensor – Thin Film Contact Switch for Seat Detection Systems: another version this guide coversSOUSHINE NH001 Seat Occupancy Pressure Sensor – Thin Film Contact Switch for Seat Detection Systems₹319
SOUSHINE SBR Film Pressure Sensor, 600mm Cord (10g~10kg): another version this guide coversSOUSHINE SBR Film Pressure Sensor, 600mm Cord (10g~10kg)₹175
SOUSHINE SBR Film Pressure Sensor, FSR 406, 780mm Cord – 10g~15kg Range: another version this guide coversSOUSHINE SBR Film Pressure Sensor, FSR 406, 780mm Cord – 10g~15kg Range₹167
Ohmite Force Sensing Resistor 02Ah9088 – Piezoresistive FSR: another version this guide coversOhmite Force Sensing Resistor 02Ah9088 – Piezoresistive FSR₹899
Seeed Studio Studio Grove Round Force Sensor (FSR402) – Analog Pressure Sensor Module: another version this guide coversSeeed Studio Grove Round Force Sensor (FSR402) – Analog Pressure Sensor Module₹1,889Closest match, check the specs
DFRobot Ultra-Thin Circular Flex Force Sensor (0.45mm, 20g-6kg Range, 120°C High-Temp Resistance): another version this guide coversDFRobot Ultra-Thin Circular Flex Force Sensor (0.45mm, 20g-6kg Range, 120°C High-Temp Resistance)₹469- Uno R3 development board: the controller used in the wiring tableFind this part
Dupont jumper wires: for the connectionsDupont Jumper Wires (40 pcs)₹49Closest match, check the specs
Solderless breadboard: to build without solderingSolderless Breadboard₹68
Alternatives and when to choose them
- RP and RFP602 thin-film sensors: more shapes and ranges.
- Tekscan FlexiForce sensors: better repeatability.
- Force sensitive resistor guide: basics.
Common mistakes to avoid
- Soldering on the tail.
- Using it as a precise scale.
- Pressing outside the active area.
- No calibration.
Frequently asked questions
How do I connect an FSR400 sensor to Arduino?
Use it in a divider with 10 kΩ and read the voltage.
Can it measure exact weight?
No. FSRs are not precise; use a load cell and HX711 for weighing.
Why do two sensors read differently?
FSRs vary from unit to unit, so calibrate each sensor separately.
Can I bend the sensor?
The film flexes, but avoid sharp bends at the tail.
What force range does it cover?
Roughly 20 g to 2 kg or 10 kg, depending on model.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.

