Comparison · Intermediate · 3 min read
RFID Readers and Tags
UHF, 13.56 MHz and 125 kHz Compared
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Choose RFID by range. 125 kHz and 13.56 MHz readers (RC522, USB card readers) work within a few centimetres and suit access cards. UHF EPC Gen2 readers read tags at distances from tens of centimetres to several metres and suit inventory, laundry and logistics. Match the reader's frequency band to your country and the tag to the surface it will be stuck to.
Key specs at a glance
- LF 125 kHz
- Access cards, a few cm
- HF 13.56 MHz
- MIFARE, NFC, library cards, a few cm
- UHF 865-868 MHz
- EPC Gen2, range up to metres
- Interfaces
- USB, UART, Bluetooth, Android OTG
- Power
- 0 to 26 dBm on portable UHF readers
- Tags
- Paper labels, laundry tags, on-metal tags
Pick the band
Each band has a different range and use.
| Band | Range | Typical use | Notes |
|---|---|---|---|
| 125 kHz (EM4100) | Few cm | Door cards and key fobs | Read only IDs; cheap |
| 13.56 MHz (MIFARE, NFC) | Few cm | Access, payments, library | See RC522 and NFC |
| UHF EPC Gen2 | Tens of cm to several m | Inventory, laundry, warehouse | Reader power and antenna set the range |
- 125 kHz (EM4100)
- Range:
- Few cm
- Typical use:
- Door cards and key fobs
- Notes:
- Read only IDs; cheap
- 13.56 MHz (MIFARE, NFC)
- Range:
- Few cm
- Typical use:
- Access, payments, library
- UHF EPC Gen2
- Range:
- Tens of cm to several m
- Typical use:
- Inventory, laundry, warehouse
- Notes:
- Reader power and antenna set the range
UHF readers
Desktop readers (for example the CHAFON CF601) plug into a PC over USB to encode tags or run inventory. Portable UHF readers connect by Type-C OTG, cable or Bluetooth to a phone or a handheld terminal, and some add a barcode scanner. Check the readers are set to the band for your country; India's licence-free UHF RFID band is 865 to 867 MHz, and readers sold for 865-868 MHz suit it.
Getting the range you expect
Range depends on reader power, antenna gain, tag size and orientation, plus what the tag is on. Metal detunes tags and water absorbs the signal. Test with the real items at the real distance. Increase reader power gradually and avoid reading tags you do not want (adjacent shelves). Follow local regulations for transmit power.
Using a reader in a project
1. Read the interface in the manual: many readers use UART with a frame protocol. 2. Connect TX, RX, power and ground; see UART. 3. Send the inventory command and parse the EPC numbers. 4. Store the EPCs in a database and map them to items. 5. For HID-keyboard readers, the tag number simply types into any text box. Combine with barcode scanners when you handle both codes.
Try it: Antenna length calculator
Change the values and the diagram and results update as you type.
Common mistakes to avoid
- Choosing a UHF reader set to the wrong regional band.
- Expecting range through metal or water.
- Placing tags on metal without a spacer.
- Setting the reader power too high and reading nearby tags.
- Using an LF reader for a long-range job.
Frequently asked questions
What is the difference between RFID and NFC?
NFC is a short-range form of HF (13.56 MHz) RFID that phones can use.
How far can a UHF reader read?
From tens of centimetres to several metres depending on setup.
Do passive tags need a battery?
No. They are powered by the reader.
Can I read tags with a phone?
NFC tags yes. UHF needs a UHF reader that connects to the phone.
Which band is licence-free in India?
865 to 867 MHz for UHF RFID. Check current regulations.
Parts for this guide
Calculators
Terms in this guide
Projects that use it
Put this into practice: 7 step-by-step builds in our project library use parts from this guide.
Keep learning
Sources
- GS1 EPC Gen2 standard
- Reader manufacturer manuals
- Indian licence-exempt band notifications (check current rules)
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.






