Component guide · Intermediate · 4 min read
WeAct Core Boards

STM32C0, G0, G4, F4, H5, H7 and H7R3, CH552T, TI MSPM0G3507 and Renesas RA4M1, plus Waveshare R7FA4 Plus A and B
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
WeAct core boards are small, low-cost breakouts for a single microcontroller with USB, a crystal, LEDs and all pins on headers. They let you learn and prototype with STM32 chips from the tiny C0 to the 480 MHz H7 (some with an LCD), the CH552T 8051 USB chip, TI's MSPM0 and Renesas RA4M1 (the chip in the Arduino UNO R4). Waveshare's R7FA4 Plus boards are UNO R4 style boards.
Key specs at a glance
- Chips
- STM32C011, G030, G031, G0B1, G431, G474, F412, H562, H723, H743, H750, H7R3; CH552T; MSPM0G3507; RA4M1
- Clock
- 24 MHz (CH552) to 600 MHz (H7R3)
- USB
- USB-C on most, DFU bootloader on STM32
- Display
- LCD on H723, H743 and H750 LCD boards
- Programming
- ST-Link/SWD, USB DFU, or Arduino bootloader
- Software
- STM32CubeIDE, Arduino (STM32duino), MicroPython (F412), Keil
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1WeAct Studio STM32C011F6P6 Core Demo Board₹217
Option 2WeAct Studio STM32G030F6P6 Core Demo Board₹190
Option 3WeAct Studio STM32G031F6P6 Core Demo Board₹219
Option 4WeAct Studio STM32G0B1CBT6 Core Demo Board₹449
Option 5WeAct Studio STM32G431CBU6 Core Demo Board₹725
Option 6WeAct Studio STM32G431-Long Core Demo Board₹449
What the WeAct STM32, CH552, MSPM0 and RA4M1 core boards is
WeAct MCU core boards are compact boards with STM32, ESP32, RP2040 and CH32 chips, such as the WeAct Black Pill, popular as low-cost development boards.
Most STM32 boards can be flashed over USB in DFU mode: hold BOOT0, press reset, then use STM32CubeProgrammer. An ST-Link gives you debugging as well.
The RA4M1 boards run Arduino UNO R4 Minima code. The CH552T is programmed with the ch55xduino core and is popular for USB keyboards and macro pads.
WeAct STM32, CH552, MSPM0 and RA4M1 core boards pinout
The pins on the WeAct STM32, CH552, MSPM0 and RA4M1 core boards and what each one does.
| Pin | Function |
|---|---|
| SWD (SWDIO, SWCLK) | ST-Link programming and debugging |
| BOOT0 / RESET | Enter USB DFU bootloader |
| USB-C | Power and DFU |
| GPIO headers | All MCU pins broken out |
- SWD (SWDIO, SWCLK)
- ST-Link programming and debugging
- BOOT0 / RESET
- Enter USB DFU bootloader
- USB-C
- Power and DFU
- GPIO headers
- All MCU pins broken out
Wiring the WeAct STM32, CH552, MSPM0 and RA4M1 core boards
All these chips are 3.3V; only some STM32 pins are 5V tolerant (marked FT in the datasheet).
| WeAct STM32, CH552, MSPM0 and RA4M1 core boards pin | Connection | Note |
|---|---|---|
| ST-Link | SWDIO, SWCLK, GND, 3.3V | Fastest flashing and debug |
| USB DFU | USB-C, hold BOOT0 then reset | No extra hardware |
| Serial | UART pins to USB-TTL | For printf output |
- ST-Link
- Connection:
- SWDIO, SWCLK, GND, 3.3V
- Note:
- Fastest flashing and debug
- USB DFU
- Connection:
- USB-C, hold BOOT0 then reset
- Note:
- No extra hardware
- Serial
- Connection:
- UART pins to USB-TTL
- Note:
- For printf output
Example code
LED pins differ by board (PC6, PC13, PB2...). WeAct's GitHub has pinouts and examples for each board.
// Board: STM32 MCU based boards > Generic STM32G4 series > G431CBUx
// Upload method: STM32CubeProgrammer (DFU) or SWD
void setup() {
pinMode(PC6, OUTPUT); // on-board LED pin, check the board
Serial.begin(115200); // USB CDC if enabled
}
void loop() {
digitalWrite(PC6, !digitalRead(PC6));
Serial.println(millis());
delay(500);
}Setup and tuning
STM32 boards support USB DFU (hold BOOT0) or ST-Link SWD.
use STM32CubeIDE, Arduino STM32duino or PlatformIO.
follow the WeAct GitHub pinout for your board version.
pins are 3.3 V.
WeAct boards use genuine chips, unlike many cheap clones.
What you need
Shop this list20 of 20 found in our store · ₹18,214
WeAct Studio STM32C011F6P6 Core Demo Board: the part this guide coversWeAct Studio STM32C011F6P6 Core Demo Board₹217
WeAct Studio STM32G030F6P6 Core Demo Board: another version this guide coversWeAct Studio STM32G030F6P6 Core Demo Board₹190
WeAct Studio STM32G031F6P6 Core Demo Board: another version this guide coversWeAct Studio STM32G031F6P6 Core Demo Board₹219
WeAct Studio STM32G0B1CBT6 Core Demo Board: another version this guide coversWeAct Studio STM32G0B1CBT6 Core Demo Board₹449
WeAct Studio STM32G431CBU6 Core Demo Board: another version this guide coversWeAct Studio STM32G431CBU6 Core Demo Board₹725
WeAct Studio STM32G431-Long Core Demo Board: another version this guide coversWeAct Studio STM32G431-Long Core Demo Board₹449
WeAct Studio STM32G474CEU6 Core Board Demo Board: another version this guide coversWeAct Studio STM32G474CEU6 Core Board Demo Board₹859
WeAct Studio STM32F412RET6 Micropython Demo Board: another version this guide coversWeAct Studio STM32F412RET6 Micropython Demo Board₹735
WeAct Studio STM32H562RGT6 STM32H5 Core Board: another version this guide coversWeAct Studio STM32H562RGT6 STM32H5 Core Board₹919
WeAct Studio STM32H723VGT6-H723VG LCD Core Demo Board: another version this guide coversWeAct Studio STM32H723VGT6-H723VG LCD Core Demo Board₹1,799
WeAct Studio STM32H743VIT6-LCD Demo Motherboard: another version this guide coversWeAct Studio STM32H743VIT6-LCD Demo Motherboard₹2,635
WeAct Studio STM32H750VBT6-LCD Demo Board: another version this guide coversWeAct Studio STM32H750VBT6-LCD Demo Board₹1,869
WeAct Studio STM32H7R3Z8J6 480MHz Cortex M7 Development Board: another version this guide coversWeAct Studio STM32H7R3Z8J6 480MHz Cortex M7 Development Board₹1,739
WeAct Studio CH552T Mini Core Board MCS51 DIP20 TSSOP20: another version this guide coversWeAct Studio CH552T Mini Core Board MCS51 DIP20 TSSOP20₹180
WeAct Studio MSPM0G3507SRHBR Core Board 128KB Flash 32KB SRAM: another version this guide coversWeAct Studio MSPM0G3507SRHBR Core Board 128KB Flash 32KB SRAM₹389
WeAct Studio RA4M1 Renesas R7FA4M1AB3CFM Core Demo Board: another version this guide coversWeAct Studio RA4M1 Renesas R7FA4M1AB3CFM Core Demo Board₹909
Waveshare R7FA4 PLUS A Development Board (R7FA4M1AB3CFM): another version this guide coversWaveshare R7FA4 PLUS A Development Board (R7FA4M1AB3CFM)₹1,079
Waveshare R7FA4 PLUS B Development Board w/ ESP32-S3 & LED Matrix: another version this guide coversWaveshare R7FA4 PLUS B Development Board w/ ESP32-S3 & LED Matrix₹1,709
USB-C cable: for power, flashing and the serial monitorArduino USB-C to USB-C Cable w/ USB-A Adapter₹1,059Closest match, check the specs
USB to TTL serial converter: to talk to the module from a PCUSB to TTL Serial Converter (CH340G / CP2102 / FT232RL / PL2303)₹85Closest match, check the specs
Alternatives and when to choose them
- STM32 Nucleo and Discovery: official boards with ST-Link.
- Microchip PIC and AVR boards: other families.
- RISC-V boards: CH32 and others.
Common mistakes to avoid
- Assuming 5 V tolerance.
- Charge-only cable.
- Wrong board version pinout.
- BOOT0 left set.
Frequently asked questions
How do I upload code to a WeAct Black Pill?
Hold BOOT0, tap reset and use DFU, or use an ST-Link.
Which Arduino core supports WeAct STM32 boards?
The STM32duino core supports the WeAct Black Pill and similar boards.
Where can I find the pinout?
WeAct publishes pinouts and schematics on its GitHub page for each board.
Are the pins 5 V tolerant?
Some STM32 pins marked FT are 5 V tolerant; analog pins are not.
Why does DFU not appear?
Hold BOOT0 while tapping reset, and use a data USB cable.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.


