Shop by category
Shop all components
Gas, Air Quality & CO2 Sensors · Generic
The BME688 Blackboard Environmental Sensor Module is a compact, AI-powered 4-in-1 environmental sensor integrating precise temperature, humidity, barometric pressure, and volatile organic compound (VOC) detection. It features I2C/SPI digital interfaces for seamless integration with Arduino, Raspberry Pi, ESP32, and other 3.3V/5V microcontroller platforms.
📖Guide for this partBME688 AI Gas Sensor→Buy 10 or more to pay ₹1,614.05 each
Business and institution accounts get extra tier pricing. Sign in for 100+ pieces.
Ships in 2-4 weeks
We source this item for your order. It is dispatched within 2 to 4 weeks; if we cannot get it, we cancel it and refund you in full. Prepaid only.
Overview
The BME688 module is a highly integrated environmental sensing solution based on Bosch Sensortec’s MEMS technology. It combines a calibrated gas sensor with metal-oxide (MOX) technology for detecting a wide range of volatile organic compounds and gases at parts-per-billion sensitivity, alongside precise Bosch MEMS sensors for temperature, humidity, and barometric pressure. The integrated AI capabilities allow the sensor to be trained for specific gas profiles and environmental contexts using the dedicated BME AI-Studio software suite.
Designed for ultra-low power operation, the module is suited for always-on applications in smart home devices, wearable health monitors, and portable environmental data loggers. The digital output ensures stable readings with minimal signal conditioning required, providing a robust sensor platform for developers and engineers focused on air quality monitoring and contextual awareness.
Good for
Category
Gas, Air Quality & CO2 SensorsSKU
GB-SENS-0489
| Brand / part no. | Generic |
|---|---|
| Category | Gas, Air Quality & CO2 Sensors |
| Interface | I2C, SPI |
| Sensor Type | Environmental (Gas, Temperature, Humidity, Pressure) |
| Module Weight | 2 g |
| Detectable Gases | VOCs, VSCs, Carbon Monoxide, Hydrogen |
| Humidity Accuracy | ±3% RH |
| Operating Voltage | 1.71V - 3.6V |
| Power Consumption | ~120 µA (typical) |
| Pressure Accuracy | ±0.6 hPa |
| Gas Detection Range | Parts-per-billion (ppb) levels |
| Temperature Accuracy | ±0.5°C |
| Gas Sensing Principle | Metal-Oxide (MOX) |
| Manufacturer Part Number | BME688 |
| Module Dimensions (L x W) | 19 mm x 17 mm |
Typical values from the manufacturer's datasheet. Confirm the exact variant before you build a product around it.
| VCC | Power, 3.3–5 V (module) |
|---|---|
| GND | Ground |
| SCL | I²C clock / SPI SCK |
| SDA | I²C data / SPI MOSI |
| SDO | SPI MISO, or I²C address select (GND 0x76, VCC 0x77) |
| CS | SPI chip select. Leave high for I²C |
Typical pin names. Boards from different makers can differ, so check the print on your module.
Library: Adafruit BME680 library (Arduino) or Bosch BSEC2 for IAQ
#include <Adafruit_BME680.h>
Adafruit_BME680 bme; // I²C, address 0x77
void setup() {
Serial.begin(115200);
if (!bme.begin()) { Serial.println("BME680 not found"); while (1); }
bme.setGasHeater(320, 150); // 320 °C for 150 ms
}
void loop() {
if (bme.performReading()) {
Serial.printf("%.1f °C %.0f %%RH %.0f hPa gas %lu Ω\n",
bme.temperature, bme.humidity, bme.pressure / 100.0, bme.gas_resistance);
}
delay(2000);
}Step-by-step builds that use parts from Gas, Air Quality & CO2 Sensors.
Category: Gas, Air Quality & CO2 Sensors; Interface: I2C, SPI; Sensor Type: Environmental (Gas, Temperature, Humidity, Pressure); Module Weight: 2 g; Detectable Gases: VOCs, VSCs, Carbon Monoxide, Hydrogen; Humidity Accuracy: ±3% RH. The full list is under Specifications.
VCC: Power, 3.3–5 V (module); GND: Ground; SCL: I²C clock / SPI SCK; SDA: I²C data / SPI MOSI; SDO: SPI MISO, or I²C address select (GND 0x76, VCC 0x77); CS: SPI chip select. Leave high for I²C. These are the typical pin names shown under Pinout & wiring. Boards from different makers can differ, so check the print on your module.
Adafruit BME680 library (Arduino) or Bosch BSEC2 for IAQ. You can copy the example code from this page.
Yes. Prices include GST and every order comes with a GST invoice. Add your GSTIN at checkout and we put it on the invoice for input credit.
Delivery is a flat ₹80 anywhere in India, and free on orders over ₹999. We ship from our Bengaluru and Guwahati warehouses, whichever is nearer to you, and the product page shows an estimated delivery date for your PIN code.
Yes, on eligible PIN codes for orders up to ₹5,000. A ₹150 COD charge is added at checkout, and checkout shows whether COD is available for your order. You can also pay by UPI, card or net banking.
Yes, if it arrives damaged, defective or is not what you ordered: tell us within 7 days of delivery and we collect it free and send a replacement or a full refund. We do not take back parts that are not faulty, so check the specs or ask us before you order. You can cancel for free until the order is dispatched.
Yes. The price per unit drops automatically at higher quantities, as shown in the price tiers above. For 100+ pieces or a purchase order, ask for a bulk quote.
Check the specifications for voltage and interface, or ask Geeko AI. It can suggest compatible boards and wiring.
Guides for this part and its category.

₹1,499.00
Incl. GST
₹779.00
Incl. GST
₹3,029.00
Incl. GST
₹2,804.00
Incl. GSTNo reviews yet. Bought or built with this? Be the first to review it.