Shop by category
Shop all components
Gas, Air Quality & CO2 Sensors · DFRobot
The DFRobot Fermion BME680 breakout board is a 4-in-1 MEMS environmental sensor integrating VOC, temperature, humidity, and barometric pressure sensing. Featuring onboard voltage regulation and level shifting, it is directly compatible with 3.3V and 5V microcontrollers like Arduino, Raspberry Pi, and ESP32 via I2C or SPI interfaces.
📖Guide for this partBME680 Environmental Sensor→Buy 10 or more to pay ₹1,889.55 each
Business and institution accounts get extra tier pricing. Sign in for 100+ pieces.
Ships in 2-4 weeks
We source this item for your order. It is dispatched within 2 to 4 weeks; if we cannot get it, we cancel it and refund you in full. Prepaid only.
Overview
The BME680 is a highly integrated environmental sensor from Bosch Sensortec, utilizing MEMS technology for compact size and low power consumption. This breakout module from DFRobot simplifies integration by providing pre-mounted 2.54mm pitch headers, a voltage regulator, and I2C logic level translation circuitry. It delivers precise measurements of volatile organic compounds (VOCs), ambient temperature, relative humidity, and atmospheric pressure, outputting an Indoor Air Quality (IAQ) index from 0 to 500.
Designed for robust performance across a wide -40°C to +85°C operating range, the sensor is ideal for continuous monitoring applications. Its digital interfaces ensure stable data transmission and easy integration into embedded systems, IoT nodes, and portable devices requiring comprehensive environmental data acquisition.
Good for
Category
Gas, Air Quality & CO2 SensorsSKU
GB-SENS-3082
| Brand / part no. | DFRobot |
|---|---|
| Category | Gas, Air Quality & CO2 Sensors |
| Input Voltage | 3.3V ~ 5.5V |
| Humidity Range | 0% to 100% RH |
| Pressure Sensing | Integrated Barometer |
| VOC / IAQ Output | IAQ index 0-500 |
| Operating Current | 5 mA typical, 25 mA (VOC measurement) |
| Temperature Range | -40°C to +85°C |
| Dimensions (Board) | 18 mm x 15.6 mm |
| Humidity Precision | ±3% RH (20% to 80% RH, 25°C) |
| Default I2C Address | 0x76 |
| Manufacturer / Series | DFRobot / Fermion (Bosch BME680) |
| Temperature Precision | ±1.0°C (0°C to 65°C) |
| Communication Interface | I2C (3.3V/5V), SPI (3.3V only on non-I2C ports) |
Typical values from the manufacturer's datasheet. Confirm the exact variant before you build a product around it.
| VCC | Power, 3.3–5 V (module) |
|---|---|
| GND | Ground |
| SCL | I²C clock / SPI SCK |
| SDA | I²C data / SPI MOSI |
| SDO | SPI MISO, or I²C address select (GND 0x76, VCC 0x77) |
| CS | SPI chip select. Leave high for I²C |
Typical pin names. Boards from different makers can differ, so check the print on your module.
Library: Adafruit BME680 library (Arduino) or Bosch BSEC2 for IAQ
#include <Adafruit_BME680.h>
Adafruit_BME680 bme; // I²C, address 0x77
void setup() {
Serial.begin(115200);
if (!bme.begin()) { Serial.println("BME680 not found"); while (1); }
bme.setGasHeater(320, 150); // 320 °C for 150 ms
}
void loop() {
if (bme.performReading()) {
Serial.printf("%.1f °C %.0f %%RH %.0f hPa gas %lu Ω\n",
bme.temperature, bme.humidity, bme.pressure / 100.0, bme.gas_resistance);
}
delay(2000);
}Step-by-step builds that use parts from Gas, Air Quality & CO2 Sensors.
Category: Gas, Air Quality & CO2 Sensors; Input Voltage: 3.3V ~ 5.5V; Humidity Range: 0% to 100% RH; Pressure Sensing: Integrated Barometer; VOC / IAQ Output: IAQ index 0-500; Operating Current: 5 mA typical, 25 mA (VOC measurement). The full list is under Specifications.
VCC: Power, 3.3–5 V (module); GND: Ground; SCL: I²C clock / SPI SCK; SDA: I²C data / SPI MOSI; SDO: SPI MISO, or I²C address select (GND 0x76, VCC 0x77); CS: SPI chip select. Leave high for I²C. These are the typical pin names shown under Pinout & wiring. Boards from different makers can differ, so check the print on your module.
Adafruit BME680 library (Arduino) or Bosch BSEC2 for IAQ. You can copy the example code from this page.
Yes. Prices include GST and every order comes with a GST invoice. Add your GSTIN at checkout and we put it on the invoice for input credit.
Delivery is a flat ₹80 anywhere in India, and free on orders over ₹999. We ship from our Bengaluru and Guwahati warehouses, whichever is nearer to you, and the product page shows an estimated delivery date for your PIN code.
Yes, on eligible PIN codes for orders up to ₹5,000. A ₹150 COD charge is added at checkout, and checkout shows whether COD is available for your order. You can also pay by UPI, card or net banking.
Yes, if it arrives damaged, defective or is not what you ordered: tell us within 7 days of delivery and we collect it free and send a replacement or a full refund. We do not take back parts that are not faulty, so check the specs or ask us before you order. You can cancel for free until the order is dispatched.
Yes. The price per unit drops automatically at higher quantities, as shown in the price tiers above. For 100+ pieces or a purchase order, ask for a bulk quote.
Check the specifications for voltage and interface, or ask Geeko AI. It can suggest compatible boards and wiring.
Guides for this part and its category.

₹1,499.00
Incl. GST
₹779.00
Incl. GST
₹3,029.00
Incl. GST
₹2,804.00
Incl. GSTNo reviews yet. Bought or built with this? Be the first to review it.