Shop by category
Shop all components
Accelerometers, Gyroscopes & IMUs · DFRobot
The DFRobot Gravity BMM150 is a triple-axis geomagnetic sensor module compatible with 3.3V/5V logic systems like Arduino, Raspberry Pi, and ESP32. It provides high-resolution magnetic field measurements for precise compass heading, navigation, and spatial orientation applications.
📖Guide for this partBMM150 and BMM350 Magnetometers→Buy 10 or more to pay ₹1,243.55 each
Business and institution accounts get extra tier pricing. Sign in for 100+ pieces.
Overview
The BMM150 sensor from Bosch employs FlipCore technology to deliver stable and accurate magnetic field measurements without requiring initial calibration. It outputs raw geomagnetic data across three perpendicular axes, enabling precise calculation of compass heading angles.
This Gravity-series module conditions the sensor signal and provides a standard 4-pin I2C interface, making it directly compatible with most microcontrollers and single-board computers. The onboard 2-bit DIP switch allows selection from four I2C addresses to avoid bus conflicts in multi-sensor setups.
| Brand / part no. | DFRobot |
|---|---|
| Category | Accelerometers, Gyroscopes & IMUs |
| Low Noise | 0.3 - 1.4 μT |
| Resolution | 0.3 μT |
| Non-linearity | <1% FS |
| Start-up Time | 3 ms |
| I2C Address Options | 4 (configurable via DIP switch) |
| Zero Current Offset | ±40 μT / ±2 μT (software optimized) |
| Power Supply Voltage | 3.3V - 5V DC |
| Operating Temperature | -40°C to +85°C |
| Communication Interface | I2C |
| Magnetic Field Range (Z-axis) | ±2500 μT |
| Operating Current (@10Hz ODR) | 1.7 mA |
| Magnetic Field Range (X/Y-axis) | ±1300 μT |
Typical values from the manufacturer's datasheet. Confirm the exact variant before you build a product around it.
Step-by-step builds that use parts from Accelerometers, Gyroscopes & IMUs.
Category: Accelerometers, Gyroscopes & IMUs; Low Noise: 0.3 - 1.4 μT; Resolution: 0.3 μT; Non-linearity: <1% FS; Start-up Time: 3 ms; I2C Address Options: 4 (configurable via DIP switch). The full list is under Specifications.
Yes. Prices include GST and every order comes with a GST invoice. Add your GSTIN at checkout and we put it on the invoice for input credit.
Delivery is a flat ₹80 anywhere in India, and free on orders over ₹999. We ship from our Bengaluru and Guwahati warehouses, whichever is nearer to you, and the product page shows an estimated delivery date for your PIN code.
Yes, on eligible PIN codes for orders up to ₹5,000. A ₹150 COD charge is added at checkout, and checkout shows whether COD is available for your order. You can also pay by UPI, card or net banking.
Yes, if it arrives damaged, defective or is not what you ordered: tell us within 7 days of delivery and we collect it free and send a replacement or a full refund. We do not take back parts that are not faulty, so check the specs or ask us before you order. You can cancel for free until the order is dispatched.
Yes. The price per unit drops automatically at higher quantities, as shown in the price tiers above. For 100+ pieces or a purchase order, ask for a bulk quote.
Check the specifications for voltage and interface, or ask Geeko AI. It can suggest compatible boards and wiring.
Guides for this part and its category.

₹679.00
Incl. GST
₹5,329.00
Incl. GST
₹1,203.00
Incl. GST
₹5,329.00
Incl. GSTNo reviews yet. Bought or built with this? Be the first to review it.