Shop by category
Shop all components
Gas, Air Quality & CO2 Sensors · DFRobot
The DFRobot Gravity I2C BME680 Environmental Sensor is a 4-in-1 MEMS module integrating VOC, temperature, humidity, and barometric pressure sensing. Featuring a plug-and-play Gravity I2C connector and onboard voltage regulation, it is directly compatible with 3.3V and 5V systems like Arduino, Raspberry Pi, and ESP32 for comprehensive environmental monitoring.
📖Guide for this partBME680 Environmental Sensor→Buy 10 or more to pay ₹1,794.55 each
Business and institution accounts get extra tier pricing. Sign in for 100+ pieces.
Ships in 2-4 weeks
We source this item for your order. It is dispatched within 2 to 4 weeks; if we cannot get it, we cancel it and refund you in full. Prepaid only.
Overview
The DFRobot Gravity BME680 Environmental Sensor is based on the Bosch BME680 MEMS chip, a highly integrated environmental sensing solution. It employs a metal-oxide (MOX) sensor for detecting a wide range of volatile organic compounds (VOCs), providing an Indoor Air Quality (IAQ) index. Simultaneously, it delivers precise readings for temperature, relative humidity, and barometric pressure, making it a comprehensive tool for environmental data acquisition.
Designed for ease of integration, the module features the standard DFRobot Gravity I2C interface, allowing for daisy-chaining with other Gravity series sensors. The onboard circuitry ensures stable operation across a 3.3V to 5V DC supply range, making it suitable for a wide array of development platforms including Arduino, ESP8266/32, Raspberry Pi, and industrial data loggers. The compact form factor and low power profile enable deployment in portable, battery-powered IoT and wearable applications.
Good for
Category
Gas, Air Quality & CO2 SensorsSKU
GB-SENS-2954
| Brand / part no. | DFRobot |
|---|---|
| Core IC | Bosch BME680 |
| Category | Gas, Air Quality & CO2 Sensors |
| Interface | Gravity I2C (Default), SPI (via reserved header) |
| Sensor Type | 4-in-1 Environmental (VOC, Temperature, Humidity, Pressure) |
| Humidity Range | 0% to 100% RH |
| Package Weight | Approx. 0.015 kg |
| Pressure Range | 300 hPa to 1100 hPa |
| Supply Voltage | 3.3V to 5V DC |
| Operating Current | ~5 mA |
| Temperature Range | Not Specified (IC rated: -40°C to +85°C) |
| Humidity Precision | ±3% RH (20% to 80% RH, 25°C) |
| Pressure Precision | ±0.6 hPa (300-1100 hPa, 0°C to 65°C) |
| Temperature Precision | ±1.0°C (0°C to 65°C) |
| IAQ (VOC) Output Range | 0 to 500 (higher = worse air quality) |
| PCB Dimensions (L x W) | 30 mm x 22 mm |
| Manufacturer Part Number | BME680 |
Typical values from the manufacturer's datasheet. Confirm the exact variant before you build a product around it.
| VCC | Power, 3.3–5 V (module) |
|---|---|
| GND | Ground |
| SCL | I²C clock / SPI SCK |
| SDA | I²C data / SPI MOSI |
| SDO | SPI MISO, or I²C address select (GND 0x76, VCC 0x77) |
| CS | SPI chip select. Leave high for I²C |
Typical pin names. Boards from different makers can differ, so check the print on your module.
Library: Adafruit BME680 library (Arduino) or Bosch BSEC2 for IAQ
#include <Adafruit_BME680.h>
Adafruit_BME680 bme; // I²C, address 0x77
void setup() {
Serial.begin(115200);
if (!bme.begin()) { Serial.println("BME680 not found"); while (1); }
bme.setGasHeater(320, 150); // 320 °C for 150 ms
}
void loop() {
if (bme.performReading()) {
Serial.printf("%.1f °C %.0f %%RH %.0f hPa gas %lu Ω\n",
bme.temperature, bme.humidity, bme.pressure / 100.0, bme.gas_resistance);
}
delay(2000);
}Step-by-step builds that use parts from Gas, Air Quality & CO2 Sensors.
Core IC: Bosch BME680; Category: Gas, Air Quality & CO2 Sensors; Interface: Gravity I2C (Default), SPI (via reserved header); Sensor Type: 4-in-1 Environmental (VOC, Temperature, Humidity, Pressure); Humidity Range: 0% to 100% RH; Package Weight: Approx. 0.015 kg. The full list is under Specifications.
VCC: Power, 3.3–5 V (module); GND: Ground; SCL: I²C clock / SPI SCK; SDA: I²C data / SPI MOSI; SDO: SPI MISO, or I²C address select (GND 0x76, VCC 0x77); CS: SPI chip select. Leave high for I²C. These are the typical pin names shown under Pinout & wiring. Boards from different makers can differ, so check the print on your module.
Adafruit BME680 library (Arduino) or Bosch BSEC2 for IAQ. You can copy the example code from this page.
Yes. Prices include GST and every order comes with a GST invoice. Add your GSTIN at checkout and we put it on the invoice for input credit.
Delivery is a flat ₹80 anywhere in India, and free on orders over ₹999. We ship from our Bengaluru and Guwahati warehouses, whichever is nearer to you, and the product page shows an estimated delivery date for your PIN code.
Yes, on eligible PIN codes for orders up to ₹5,000. A ₹150 COD charge is added at checkout, and checkout shows whether COD is available for your order. You can also pay by UPI, card or net banking.
Yes, if it arrives damaged, defective or is not what you ordered: tell us within 7 days of delivery and we collect it free and send a replacement or a full refund. We do not take back parts that are not faulty, so check the specs or ask us before you order. You can cancel for free until the order is dispatched.
Yes. The price per unit drops automatically at higher quantities, as shown in the price tiers above. For 100+ pieces or a purchase order, ask for a bulk quote.
Check the specifications for voltage and interface, or ask Geeko AI. It can suggest compatible boards and wiring.
Guides for this part and its category.

₹1,499.00
Incl. GST
₹779.00
Incl. GST
₹3,029.00
Incl. GST
₹2,804.00
Incl. GSTNo reviews yet. Bought or built with this? Be the first to review it.