Shop by category
Shop all components
Gas, Air Quality & CO2 Sensors · Generic
The MG811 CO2 Gas Sensor Module is a metal-oxide (MOx) based sensor designed for detecting carbon dioxide concentrations from 0 to 10,000 ppm. It provides both analog voltage output and a configurable digital TTL output, making it compatible with development platforms like Arduino and Raspberry Pi (with an external ADC).
📖Guide for this partMG811 and MG812 Solid Electrolyte CO2 Sensors→Buy 10 or more to pay ₹2,184.05 each
Business and institution accounts get extra tier pricing. Sign in for 100+ pieces.
Overview
The MG811 module utilizes a heated metal-oxide semiconductor (MOS) sensing element specifically tuned for carbon dioxide. The sensor requires a 6V supply to power its internal heater, which brings the sensing element to its optimal operating temperature. As CO2 concentration increases, the sensor’s conductivity changes, resulting in a corresponding decrease in the analog output voltage signal.
This module includes signal conditioning circuitry that provides a stable analog output and a digital output that triggers when a user-defined concentration threshold is exceeded, set via the onboard potentiometer. Its design is suited for basic air quality assessment, educational projects, and non-critical environmental monitoring where NDIR sensors may be cost-prohibitive, though it may exhibit cross-sensitivity to other gases.
| Brand / part no. | Generic |
|---|---|
| Category | Gas, Air Quality & CO2 Sensors |
| Target Gas | Carbon Dioxide (CO2) |
| Sensor Type | Metal Oxide Semiconductor (MOS) |
| Analog Output | Voltage signal (decreases with increasing CO2) |
| Module Weight | Approx. 10 g |
| Digital Output | TTL, active HIGH (configurable threshold) |
| Interface Pins | VCC, GND, AOUT, DOUT |
| Detection Range | 0 – 10,000 ppm |
| Board Dimensions | 32 mm (L) x 22 mm (W) |
| Operating Voltage | 6V DC |
Typical values from the manufacturer's datasheet. Confirm the exact variant before you build a product around it.
Step-by-step builds that use parts from Gas, Air Quality & CO2 Sensors.
Category: Gas, Air Quality & CO2 Sensors; Target Gas: Carbon Dioxide (CO2); Sensor Type: Metal Oxide Semiconductor (MOS); Analog Output: Voltage signal (decreases with increasing CO2); Module Weight: Approx. 10 g; Digital Output: TTL, active HIGH (configurable threshold). The full list is under Specifications.
Yes. Prices include GST and every order comes with a GST invoice. Add your GSTIN at checkout and we put it on the invoice for input credit.
Delivery is a flat ₹80 anywhere in India, and free on orders over ₹999. We ship from our Bengaluru and Guwahati warehouses, whichever is nearer to you, and the product page shows an estimated delivery date for your PIN code.
Yes, on eligible PIN codes for orders up to ₹5,000. A ₹150 COD charge is added at checkout, and checkout shows whether COD is available for your order. You can also pay by UPI, card or net banking.
Yes, if it arrives damaged, defective or is not what you ordered: tell us within 7 days of delivery and we collect it free and send a replacement or a full refund. We do not take back parts that are not faulty, so check the specs or ask us before you order. You can cancel for free until the order is dispatched.
Yes. The price per unit drops automatically at higher quantities, as shown in the price tiers above. For 100+ pieces or a purchase order, ask for a bulk quote.
Check the specifications for voltage and interface, or ask Geeko AI. It can suggest compatible boards and wiring.
Guides for this part and its category.

₹1,499.00
Incl. GST
₹779.00
Incl. GST
₹3,029.00
Incl. GST
₹2,804.00
Incl. GSTNo reviews yet. Bought or built with this? Be the first to review it.