Shop by category
Shop all components
Gas, Air Quality & CO2 Sensors · Mikroe
The Mikroe HYDROGEN Click (Mikroe‑1629) is a mikroBUS-compatible sensor board featuring an MQ-8 tin dioxide (SnO2) sensor for detecting hydrogen gas concentrations from 100 to 10,000 ppm. It provides an analog output signal for easy integration with microcontrollers like Arduino, Raspberry Pi, and STM32 development boards.
📖Guide for this partMQ-6 LPG / Propane / Butane and MQ-8 Hydrogen Gas Sensor Modules→Buy 10 or more to pay ₹1,072.55 each
Business and institution accounts get extra tier pricing. Sign in for 100+ pieces.
Overview
The HYDROGEN Click utilizes an MQ-8 semiconductor gas sensor with a tin dioxide (SnO2) sensing layer. In clean air, the sensor’s conductivity is low; it increases proportionally with rising hydrogen gas concentration. The board includes a potentiometer to adjust the sensor circuit’s load resistance, allowing calibration for specific environmental conditions and ensuring accurate ppm readings.
Designed for the mikroBUS standard, this Click board provides a plug-and-play solution for rapid prototyping on compatible host boards. It requires a 5V power supply for optimal sensor heater operation, though the logic is compatible with 3.3V systems. The sensor requires an initial 24-hour preheat period for stabilization before precise measurements can be taken.
| Brand / part no. | Mikroe |
|---|---|
| Category | Gas, Air Quality & CO2 Sensors |
| Calibration | On-board Potentiometer |
| Sensor Type | MQ-8 Hydrogen Gas Sensor |
| Preheat Time | >24 hours (for stabilization) |
| Board Interface | mikroBUS |
| Detection Range | 100 - 10,000 ppm H2 |
| Board Dimensions | 42.9 x 25.4 mm |
| Output Interface | Analog |
| Operating Voltage | 3.3V to 5V DC |
| Sensing Principle | Tin Dioxide (SnO2) Semiconductor |
| Manufacturer Part Number | Mikroe‑1629 |
Typical values from the manufacturer's datasheet. Confirm the exact variant before you build a product around it.
Step-by-step builds that use parts from Gas, Air Quality & CO2 Sensors.
Category: Gas, Air Quality & CO2 Sensors; Calibration: On-board Potentiometer; Sensor Type: MQ-8 Hydrogen Gas Sensor; Preheat Time: >24 hours (for stabilization); Board Interface: mikroBUS; Detection Range: 100 - 10,000 ppm H2. The full list is under Specifications.
Yes. Prices include GST and every order comes with a GST invoice. Add your GSTIN at checkout and we put it on the invoice for input credit.
Delivery is a flat ₹80 anywhere in India, and free on orders over ₹999. We ship from our Bengaluru and Guwahati warehouses, whichever is nearer to you, and the product page shows an estimated delivery date for your PIN code.
Yes, on eligible PIN codes for orders up to ₹5,000. A ₹150 COD charge is added at checkout, and checkout shows whether COD is available for your order. You can also pay by UPI, card or net banking.
Yes, if it arrives damaged, defective or is not what you ordered: tell us within 7 days of delivery and we collect it free and send a replacement or a full refund. We do not take back parts that are not faulty, so check the specs or ask us before you order. You can cancel for free until the order is dispatched.
Yes. The price per unit drops automatically at higher quantities, as shown in the price tiers above. For 100+ pieces or a purchase order, ask for a bulk quote.
Check the specifications for voltage and interface, or ask Geeko AI. It can suggest compatible boards and wiring.
Guides for this part and its category.

₹1,499.00
Incl. GST
₹779.00
Incl. GST
₹3,029.00
Incl. GST
₹2,804.00
Incl. GSTNo reviews yet. Bought or built with this? Be the first to review it.