Shop by category
Shop all components
Gas, Air Quality & CO2 Sensors · Pimoroni
The Pimoroni BME688 breakout provides a compact, low-power 4-in-1 environmental sensing solution, integrating Bosch Sensortec’s AI-enabled gas scanner with high-accuracy pressure, humidity, and temperature sensors. It features a Raspberry Pi-compatible pinout and is easily interfaced via I2C or SPI for integration with Arduino, Raspberry Pi, ESP32, and other 3.3V microcontroller platforms.
📖Guide for this partBME688 AI Gas Sensor→Buy 10 or more to pay ₹2,105.20 each
Business and institution accounts get extra tier pricing. Sign in for 100+ pieces.
Ships in 2-4 weeks
We source this item for your order. It is dispatched within 2 to 4 weeks; if we cannot get it, we cancel it and refund you in full. Prepaid only.
Overview
The BME688 is Bosch Sensortec’s first gas sensor with integrated Artificial Intelligence (AI), packaged alongside high-linearity pressure, humidity, and temperature sensors. Its MEMS-based gas sensing element can detect a wide range of volatile organic compounds (VOCs), volatile sulfur compounds (VSCs), carbon monoxide, and hydrogen in the part-per-billion (ppb) range. The integrated AI-Studio tool allows for custom training of the gas scanner’s sensitivity and selectivity for specific application scenarios.
Housed in a robust 3.0 x 3.0 x 0.93 mm package, the sensor is designed for mobile and connected applications where minimal size and power consumption are critical. The Pimoroni breakout board provides easy access to the sensor’s pins, includes reverse polarity protection for the Breakout Garden connector, and supports a wide operating temperature range from -40°C to +85°C for demanding environments.
Good for
Category
Gas, Air Quality & CO2 SensorsSKU
GB-SENS-0297
| Brand / part no. | Pimoroni |
|---|---|
| Category | Gas, Air Quality & CO2 Sensors |
| Sensor Model | Bosch Sensortec BME688 |
| Digital Interface | I2C (up to 3.4 MHz), SPI (3/4 wire, up to 10 MHz) |
| Humidity Accuracy | ±3% RH |
| Operating Current | 3.1 µA (typical) |
| Operating Voltage | 1.71V to 3.6V DC |
| Sensor Dimensions | 3.0 mm x 3.0 mm x 0.93 mm |
| Gas Detection Range | VOCs, VSCs, CO, H2 (ppb range) |
| Standard Scan Speed | 10.8 seconds per scan |
| Operating Temperature | -40°C to +85°C |
| Response Time (τ 63% ) | ~8 s |
| Breakout Board Compatibility | Raspberry Pi, Arduino, Pico (I2C/SPI) |
Typical values from the manufacturer's datasheet. Confirm the exact variant before you build a product around it.
| VCC | Power, 3.3–5 V (module) |
|---|---|
| GND | Ground |
| SCL | I²C clock / SPI SCK |
| SDA | I²C data / SPI MOSI |
| SDO | SPI MISO, or I²C address select (GND 0x76, VCC 0x77) |
| CS | SPI chip select. Leave high for I²C |
Typical pin names. Boards from different makers can differ, so check the print on your module.
Library: Adafruit BME680 library (Arduino) or Bosch BSEC2 for IAQ
#include <Adafruit_BME680.h>
Adafruit_BME680 bme; // I²C, address 0x77
void setup() {
Serial.begin(115200);
if (!bme.begin()) { Serial.println("BME680 not found"); while (1); }
bme.setGasHeater(320, 150); // 320 °C for 150 ms
}
void loop() {
if (bme.performReading()) {
Serial.printf("%.1f °C %.0f %%RH %.0f hPa gas %lu Ω\n",
bme.temperature, bme.humidity, bme.pressure / 100.0, bme.gas_resistance);
}
delay(2000);
}Step-by-step builds that use parts from Gas, Air Quality & CO2 Sensors.
Category: Gas, Air Quality & CO2 Sensors; Sensor Model: Bosch Sensortec BME688; Digital Interface: I2C (up to 3.4 MHz), SPI (3/4 wire, up to 10 MHz); Humidity Accuracy: ±3% RH; Operating Current: 3.1 µA (typical); Operating Voltage: 1.71V to 3.6V DC. The full list is under Specifications.
VCC: Power, 3.3–5 V (module); GND: Ground; SCL: I²C clock / SPI SCK; SDA: I²C data / SPI MOSI; SDO: SPI MISO, or I²C address select (GND 0x76, VCC 0x77); CS: SPI chip select. Leave high for I²C. These are the typical pin names shown under Pinout & wiring. Boards from different makers can differ, so check the print on your module.
Adafruit BME680 library (Arduino) or Bosch BSEC2 for IAQ. You can copy the example code from this page.
Yes. Prices include GST and every order comes with a GST invoice. Add your GSTIN at checkout and we put it on the invoice for input credit.
Delivery is a flat ₹80 anywhere in India, and free on orders over ₹999. We ship from our Bengaluru and Guwahati warehouses, whichever is nearer to you, and the product page shows an estimated delivery date for your PIN code.
Yes, on eligible PIN codes for orders up to ₹5,000. A ₹150 COD charge is added at checkout, and checkout shows whether COD is available for your order. You can also pay by UPI, card or net banking.
Yes, if it arrives damaged, defective or is not what you ordered: tell us within 7 days of delivery and we collect it free and send a replacement or a full refund. We do not take back parts that are not faulty, so check the specs or ask us before you order. You can cancel for free until the order is dispatched.
Yes. The price per unit drops automatically at higher quantities, as shown in the price tiers above. For 100+ pieces or a purchase order, ask for a bulk quote.
Check the specifications for voltage and interface, or ask Geeko AI. It can suggest compatible boards and wiring.
Guides for this part and its category.

₹1,499.00
Incl. GST
₹779.00
Incl. GST
₹3,029.00
Incl. GST
₹2,804.00
Incl. GSTNo reviews yet. Bought or built with this? Be the first to review it.