Shop by category
Shop all components
Gas, Air Quality & CO2 Sensors · Seeed Studio
The Seeed Studio Studio Grove BME688 is a high-performance 4-in-1 environmental sensor module integrating gas, humidity, pressure, and temperature sensing with built-in AI capabilities. It features a Grove-compatible interface for easy connection to development platforms like Arduino, Raspberry Pi, and ESP32.
📖Guide for this partBME688 AI Gas Sensor→Buy 10 or more to pay ₹3,457.05 each
Business and institution accounts get extra tier pricing. Sign in for 100+ pieces.
Ships in 2-4 weeks
We source this item for your order. It is dispatched within 2 to 4 weeks; if we cannot get it, we cancel it and refund you in full. Prepaid only.
Overview
The Grove BME688 module leverages Bosch’s advanced MEMS technology to provide a comprehensive environmental monitoring solution. The sensor’s integrated AI core enables on-device gas scanning and pattern recognition, allowing for intelligent air quality assessment without complex external processing. It communicates via a simple I2C interface through the Grove connector, making it ideal for rapid prototyping and integration into IoT systems.
This module is designed for stable, long-term operation in a variety of conditions, supporting applications from indoor air quality monitoring to weather station data logging. Its compact form factor and digital output eliminate the need for analog signal conditioning, providing clean, calibrated data directly to your microcontroller.
Good for
Category
Gas, Air Quality & CO2 SensorsSKU
GB-SENS-2806
| Brand / part no. | Seeed Studio |
|---|---|
| Category | Gas, Air Quality & CO2 Sensors |
| Interface | I2C (via Grove 4-pin) |
| AI Feature | Integrated gas scanning and pattern recognition |
| Gas Sensor | MOX-based for VOC and CO2 equivalent detection |
| Sensor Model | BME688 |
| Humidity Range | 0 - 100% RH |
| Pressure Range | 300 - 1100 hPa |
| Dimensions (PCB) | 40mm x 20mm x 10mm (approx.) |
| Humidity Accuracy | ±3% RH |
| Operating Voltage | 1.71V - 3.6V DC |
| Pressure Accuracy | ±1 hPa |
| Temperature Range | -40°C to 85°C |
| Temperature Accuracy | ±1.5°C |
| Measurement Parameters | Gas (VOC/CO2eq), Humidity, Pressure, Temperature |
Typical values from the manufacturer's datasheet. Confirm the exact variant before you build a product around it.
| VCC | Power, 3.3–5 V (module) |
|---|---|
| GND | Ground |
| SCL | I²C clock / SPI SCK |
| SDA | I²C data / SPI MOSI |
| SDO | SPI MISO, or I²C address select (GND 0x76, VCC 0x77) |
| CS | SPI chip select. Leave high for I²C |
Typical pin names. Boards from different makers can differ, so check the print on your module.
Library: Adafruit BME680 library (Arduino) or Bosch BSEC2 for IAQ
#include <Adafruit_BME680.h>
Adafruit_BME680 bme; // I²C, address 0x77
void setup() {
Serial.begin(115200);
if (!bme.begin()) { Serial.println("BME680 not found"); while (1); }
bme.setGasHeater(320, 150); // 320 °C for 150 ms
}
void loop() {
if (bme.performReading()) {
Serial.printf("%.1f °C %.0f %%RH %.0f hPa gas %lu Ω\n",
bme.temperature, bme.humidity, bme.pressure / 100.0, bme.gas_resistance);
}
delay(2000);
}Step-by-step builds that use parts from Gas, Air Quality & CO2 Sensors.
Category: Gas, Air Quality & CO2 Sensors; Interface: I2C (via Grove 4-pin); AI Feature: Integrated gas scanning and pattern recognition; Gas Sensor: MOX-based for VOC and CO2 equivalent detection; Sensor Model: BME688; Humidity Range: 0 - 100% RH. The full list is under Specifications.
VCC: Power, 3.3–5 V (module); GND: Ground; SCL: I²C clock / SPI SCK; SDA: I²C data / SPI MOSI; SDO: SPI MISO, or I²C address select (GND 0x76, VCC 0x77); CS: SPI chip select. Leave high for I²C. These are the typical pin names shown under Pinout & wiring. Boards from different makers can differ, so check the print on your module.
Adafruit BME680 library (Arduino) or Bosch BSEC2 for IAQ. You can copy the example code from this page.
Yes. Prices include GST and every order comes with a GST invoice. Add your GSTIN at checkout and we put it on the invoice for input credit.
Delivery is a flat ₹80 anywhere in India, and free on orders over ₹999. We ship from our Bengaluru and Guwahati warehouses, whichever is nearer to you, and the product page shows an estimated delivery date for your PIN code.
Yes, on eligible PIN codes for orders up to ₹5,000. A ₹150 COD charge is added at checkout, and checkout shows whether COD is available for your order. You can also pay by UPI, card or net banking.
Yes, if it arrives damaged, defective or is not what you ordered: tell us within 7 days of delivery and we collect it free and send a replacement or a full refund. We do not take back parts that are not faulty, so check the specs or ask us before you order. You can cancel for free until the order is dispatched.
Yes. The price per unit drops automatically at higher quantities, as shown in the price tiers above. For 100+ pieces or a purchase order, ask for a bulk quote.
Check the specifications for voltage and interface, or ask Geeko AI. It can suggest compatible boards and wiring.
Guides for this part and its category.

₹1,499.00
Incl. GST
₹779.00
Incl. GST
₹3,029.00
Incl. GST
₹2,804.00
Incl. GSTNo reviews yet. Bought or built with this? Be the first to review it.