Shop by category
Shop all components
Gas, Air Quality & CO2 Sensors · SparkFun
The SparkFun BME688 Environmental Sensor Breakout integrates a high-precision gas, temperature, humidity, and barometric pressure sensor on a compact 1-inch board. It features Qwiic connectors for solder-free I2C connectivity and supports SPI, making it compatible with Arduino, Raspberry Pi, ESP32, and other 3.3V/5V microcontroller platforms for comprehensive environmental monitoring.
📖Guide for this partBME688 AI Gas Sensor→Buy 10 or more to pay ₹4,611.30 each
Business and institution accounts get extra tier pricing. Sign in for 100+ pieces.
Overview
The SparkFun BME688 Environmental Sensor Breakout is built around the Bosch Sensortec BME688, a 4-in-1 digital MEMS sensor. It employs a micro-hotplate metal oxide (MOX) gas sensor for detecting a broad spectrum of volatile organic compounds (VOCs), volatile sulfur compounds (VSCs), carbon monoxide, and hydrogen. The integrated temperature, humidity, and barometric pressure sensors provide essential environmental compensation and standalone measurement capabilities.
The board’s signal conditioning and 24-bit ADC deliver calibrated digital outputs via I2C or SPI. The inclusion of two Qwiic connectors enables rapid, daisy-chainable prototyping without soldering. Its 1-inch square form factor and low-voltage operation (1.71V to 3.6V) make it ideal for embedding into space-constrained and power-sensitive designs for precise air quality assessment and environmental data logging.
Good for
Category
Gas, Air Quality & CO2 SensorsSKU
GB-SENS-0472
| Brand / part no. | SparkFun |
|---|---|
| Weight | 5 g |
| Category | Gas, Air Quality & CO2 Sensors |
| Sensor Model | BME688 |
| Pressure Range | 300 hPa – 1100 hPa |
| Board Dimensions | 1 in × 1 in (25.4 mm × 25.4 mm) |
| Humidity Accuracy | ±3% RH |
| Operating Voltage | 1.71V – 3.6V |
| Pressure Accuracy | ±60 Pa |
| Temperature Range | -40°C to +85°C |
| Current Consumption | 2.1 µA – 18 mA |
| Temperature Accuracy | ±1.0°C |
| Communication Interface | I2C (Qwiic), SPI |
| Relative Humidity Range | 0% – 100% |
| Standard Gas Scan Speed | 10.8 sec/scan |
Typical values from the manufacturer's datasheet. Confirm the exact variant before you build a product around it.
| VCC | Power, 3.3–5 V (module) |
|---|---|
| GND | Ground |
| SCL | I²C clock / SPI SCK |
| SDA | I²C data / SPI MOSI |
| SDO | SPI MISO, or I²C address select (GND 0x76, VCC 0x77) |
| CS | SPI chip select. Leave high for I²C |
Typical pin names. Boards from different makers can differ, so check the print on your module.
Library: Adafruit BME680 library (Arduino) or Bosch BSEC2 for IAQ
#include <Adafruit_BME680.h>
Adafruit_BME680 bme; // I²C, address 0x77
void setup() {
Serial.begin(115200);
if (!bme.begin()) { Serial.println("BME680 not found"); while (1); }
bme.setGasHeater(320, 150); // 320 °C for 150 ms
}
void loop() {
if (bme.performReading()) {
Serial.printf("%.1f °C %.0f %%RH %.0f hPa gas %lu Ω\n",
bme.temperature, bme.humidity, bme.pressure / 100.0, bme.gas_resistance);
}
delay(2000);
}Step-by-step builds that use parts from Gas, Air Quality & CO2 Sensors.
Weight: 5 g; Category: Gas, Air Quality & CO2 Sensors; Sensor Model: BME688; Pressure Range: 300 hPa – 1100 hPa; Board Dimensions: 1 in × 1 in (25.4 mm × 25.4 mm); Humidity Accuracy: ±3% RH. The full list is under Specifications.
VCC: Power, 3.3–5 V (module); GND: Ground; SCL: I²C clock / SPI SCK; SDA: I²C data / SPI MOSI; SDO: SPI MISO, or I²C address select (GND 0x76, VCC 0x77); CS: SPI chip select. Leave high for I²C. These are the typical pin names shown under Pinout & wiring. Boards from different makers can differ, so check the print on your module.
Adafruit BME680 library (Arduino) or Bosch BSEC2 for IAQ. You can copy the example code from this page.
Yes. Prices include GST and every order comes with a GST invoice. Add your GSTIN at checkout and we put it on the invoice for input credit.
Delivery is a flat ₹80 anywhere in India, and free on orders over ₹999. We ship from our Bengaluru and Guwahati warehouses, whichever is nearer to you, and the product page shows an estimated delivery date for your PIN code.
Yes, on eligible PIN codes for orders up to ₹5,000. A ₹150 COD charge is added at checkout, and checkout shows whether COD is available for your order. You can also pay by UPI, card or net banking.
Yes, if it arrives damaged, defective or is not what you ordered: tell us within 7 days of delivery and we collect it free and send a replacement or a full refund. We do not take back parts that are not faulty, so check the specs or ask us before you order. You can cancel for free until the order is dispatched.
Yes. The price per unit drops automatically at higher quantities, as shown in the price tiers above. For 100+ pieces or a purchase order, ask for a bulk quote.
Check the specifications for voltage and interface, or ask Geeko AI. It can suggest compatible boards and wiring.
Guides for this part and its category.

₹1,499.00
Incl. GST
₹779.00
Incl. GST
₹3,029.00
Incl. GST
₹2,804.00
Incl. GSTNo reviews yet. Bought or built with this? Be the first to review it.