Shop by category
Shop all components
Gas, Air Quality & CO2 Sensors · Waveshare
The Waveshare BME680 Environmental Sensor Module integrates temperature, humidity, barometric pressure, and indoor air quality (IAQ) sensing into a single compact unit, offering I2C and SPI communication interfaces with 3.3V/5V logic compatibility for Raspberry Pi, Arduino, ESP32, and other microcontroller platforms.
📖Guide for this partBME680 Environmental Sensor→Buy 10 or more to pay ₹1,167.55 each
Business and institution accounts get extra tier pricing. Sign in for 100+ pieces.
Ships in 2-4 weeks
We source this item for your order. It is dispatched within 2 to 4 weeks; if we cannot get it, we cancel it and refund you in full. Prepaid only.
Overview
The BME680 sensor from Bosch Sensortec is a highly integrated environmental MEMS device. This Waveshare module provides breakout access to the sensor’s I2C and SPI digital interfaces, along with necessary pull-up resistors and a voltage level translator. The BME680 measures absolute humidity, barometric pressure, ambient temperature, and calculates an Indoor Air Quality (IAQ) index based on detected volatile organic compounds (VOCs) and other gases via its integrated metal-oxide (MOX) gas sensor.
Engineered for stability and precision, the sensor features dedicated signal conditioning and compensation algorithms. The module’s compact footprint and low current consumption make it ideal for integration into space-constrained and power-sensitive designs, from IoT environmental nodes to HVAC system monitoring and wearable health trackers.
Good for
Category
Gas, Air Quality & CO2 SensorsSKU
GB-SENS-0509
| Brand / part no. | Waveshare |
|---|---|
| Category | Gas, Air Quality & CO2 Sensors |
| Gas Sensor | Integrated MOX for VOC/IAQ detection |
| I2C Address | Configurable (default 0x76 or 0x77) |
| Sensor Model | BME680 |
| Humidity Range | 0% to 100% RH |
| Pressure Range | 300 hPa to 1100 hPa |
| Package Contents | 1x Waveshare BME680 Environmental Sensor Module |
| Humidity Accuracy | ±3% RH |
| Pressure Accuracy | ±1.0 hPa (typical) |
| Temperature Range | -40°C to +85°C |
| Supply Voltage (VDD) | 1.8V to 3.6V (sensor core), 3.3V/5V (module logic) |
| Temperature Accuracy | ±1.0°C (0°C to 65°C) |
| Communication Interface | I2C, SPI (selectable via CS pin) |
| Logic Level Compatibility | 3.3V, 5V (onboard level translator) |
Typical values from the manufacturer's datasheet. Confirm the exact variant before you build a product around it.
| VCC | Power, 3.3–5 V (module) |
|---|---|
| GND | Ground |
| SCL | I²C clock / SPI SCK |
| SDA | I²C data / SPI MOSI |
| SDO | SPI MISO, or I²C address select (GND 0x76, VCC 0x77) |
| CS | SPI chip select. Leave high for I²C |
Typical pin names. Boards from different makers can differ, so check the print on your module.
Library: Adafruit BME680 library (Arduino) or Bosch BSEC2 for IAQ
#include <Adafruit_BME680.h>
Adafruit_BME680 bme; // I²C, address 0x77
void setup() {
Serial.begin(115200);
if (!bme.begin()) { Serial.println("BME680 not found"); while (1); }
bme.setGasHeater(320, 150); // 320 °C for 150 ms
}
void loop() {
if (bme.performReading()) {
Serial.printf("%.1f °C %.0f %%RH %.0f hPa gas %lu Ω\n",
bme.temperature, bme.humidity, bme.pressure / 100.0, bme.gas_resistance);
}
delay(2000);
}Step-by-step builds that use parts from Gas, Air Quality & CO2 Sensors.
Category: Gas, Air Quality & CO2 Sensors; Gas Sensor: Integrated MOX for VOC/IAQ detection; I2C Address: Configurable (default 0x76 or 0x77); Sensor Model: BME680; Humidity Range: 0% to 100% RH; Pressure Range: 300 hPa to 1100 hPa. The full list is under Specifications.
VCC: Power, 3.3–5 V (module); GND: Ground; SCL: I²C clock / SPI SCK; SDA: I²C data / SPI MOSI; SDO: SPI MISO, or I²C address select (GND 0x76, VCC 0x77); CS: SPI chip select. Leave high for I²C. These are the typical pin names shown under Pinout & wiring. Boards from different makers can differ, so check the print on your module.
Adafruit BME680 library (Arduino) or Bosch BSEC2 for IAQ. You can copy the example code from this page.
Yes. Prices include GST and every order comes with a GST invoice. Add your GSTIN at checkout and we put it on the invoice for input credit.
Delivery is a flat ₹80 anywhere in India, and free on orders over ₹999. We ship from our Bengaluru and Guwahati warehouses, whichever is nearer to you, and the product page shows an estimated delivery date for your PIN code.
Yes, on eligible PIN codes for orders up to ₹5,000. A ₹150 COD charge is added at checkout, and checkout shows whether COD is available for your order. You can also pay by UPI, card or net banking.
Yes, if it arrives damaged, defective or is not what you ordered: tell us within 7 days of delivery and we collect it free and send a replacement or a full refund. We do not take back parts that are not faulty, so check the specs or ask us before you order. You can cancel for free until the order is dispatched.
Yes. The price per unit drops automatically at higher quantities, as shown in the price tiers above. For 100+ pieces or a purchase order, ask for a bulk quote.
Check the specifications for voltage and interface, or ask Geeko AI. It can suggest compatible boards and wiring.
Guides for this part and its category.

₹1,499.00
Incl. GST
₹779.00
Incl. GST
₹3,029.00
Incl. GST
₹2,804.00
Incl. GSTNo reviews yet. Bought or built with this? Be the first to review it.