GPS speedometer and clock
A bike or car speedometer that needs no wheel sensor: satellites do the measuring.
Shop by category
Shop all componentsMeshtastic is open-source firmware that turns small LoRa boards into a mesh network for text messages and positions. Each node pairs with a phone app over Bluetooth, and messages hop from node to node. It is useful on farms, treks and events where there is no signal.
Never power a LoRa radio without an antenna fitted.
Tick anything you already have and the total updates.
ESP32-S3 plus SX1262 LoRa radio: one per person
Plug Grove sensors into a node to share readings on the mesh
Both must use the same region, channel and modem preset.
Check the antenna is for the right band and fitted firmly; move the node higher.
Remove old pairings from the phone's Bluetooth settings and try again.
Use the IN region (865 to 867 MHz) at the default power; this is a licence-exempt band.
From a few hundred metres in town to many kilometres with a clear line of sight.
Channels use AES encryption with the key you set.
4 parts: 2 × Seeed Studio Studio XIAO ESP32S3 & Wio-SX1262 Kit for Meshtastic & LoRaWAN, Seeed Studio Studio Grove Shield for Seeeduino XIAO, 5cm IPEX 1 to RP-SMA Female RF Pigtail Cable RG1.13 and LoRa Antenna 868MHz 0.6dBi RP-SMA. On this page you can tick the parts you already have and add only the rest to your cart.
It is a beginner project and takes about 1 hour. The build on this page has 6 steps.
About ₹3,949 for the parts at the prices on this page. Quantity price breaks lower the cost when you build several.
How LoRa trades speed for range; Mesh networking and hops; Choosing the right region and antenna.
Never power a LoRa radio without an antenna fitted.
Ideas that reuse this build: 4G SMS door alarm. They are listed under Take it further on this page.
A bike or car speedometer that needs no wheel sensor: satellites do the measuring.
Records where you went every five seconds, ready to open on a map.
Two boards, two radios: press the button at the gate and it rings indoors.
Check temperature, humidity and pressure from any phone on your Wi-Fi.
Learning project. Check every circuit and the datasheet of each part before you power it up.