Same-day dispatch before 2 PM · Free delivery over ₹999 · GST invoices Get the appPrices incl. GST
Geekobot
Snap & SendNEWGeeko AIWhere's myOrder
Log in
Products
  • Projects
    • Component guidesHow parts work, with code you can run
    • Learning pathsFrom your first LED to your first robot
    • Workshops & eventsOnline sessions for makers and classes
    • ElectrolarkFree guided builds, simulator and certificates
    • Students & teachersStudent discount and classroom help
    • CommunityShare builds and ask other makers
    • CalculatorsOhm's law, LED resistor, 555 and 100+ more
    • Circuit builderWire parts and run the circuit, powered by Electrolark
    • Geeko AIAsk what to buy or how to wire it
    • Snap & SendPhotograph a part or list, we find it
    • Part finderAnswer a few questions, get the right part
    • Compatibility checkWill these two parts work together?
    • Compare partsSpecs side by side
    • Business & bulk ordersGST invoices, credit and volume prices
    • Request a quotationSend your list, get a quote
    • Classroom kitsPer-student kits and lab bundles
    • Gift cardsFor students, teams and events
  • Atal Tinkering Lab
BOM to cart
Geekobot

Components, kits and know-how for makers, students, engineers, labs and businesses across India.

Ask Geeko AIOrders, parts and projects, any timeEmail supportReply within 1 working dayGet the Geekobot appAdd it to your home screen, free

Follow us

Shop

  • Boards & SBCs
  • Sensors & Modules
  • IoT & Wireless
  • Drone & FPV
  • 3D Printing
  • Filaments & Resins
  • Motors & Drivers
  • Power & Batteries
  • Semiconductors
  • Passive
  • Displays & LEDs
  • Switches & Relays
  • Wires & Cables
  • Prototyping
  • Tools & Test
  • Robotics
  • STEM Kits
  • Atal Tinkering Lab
  • Mechanical Parts
  • Audio

Orders

  • Track your order
  • Help & support
  • Shipping and delivery
  • Refunds and cancellation
  • Contact us

Learn

  • Projects
  • Geeko AI project assistant
  • Learning paths
  • Guides
  • Calculators
  • Electrolark: free guided builds

Part tools

  • Part finder
  • Compare parts
  • Will it work with my board?

Institutions

  • Classroom kits
  • Atal Tinkering Lab
  • Students & teachers
  • Workshops & Events

Business

  • Business & education
  • Request a quotation
  • BOM bulk upload
  • Quick order by SKU

Company

  • About Geekobot
  • Community
  • Gift cards
  • Terms & conditions
  • Privacy policy
  • Product directory
  • Sitemap

© 2026 Geekobot, a trade name of OLatus Systems Private Limited. All rights reserved.

20, 1st Floor, Neeladri Complex, 10th Cross, Sampige Rd, 2nd Main, Malleshwaram, Bengaluru, Karnataka 560003 · GSTIN 29AACCO0462F1ZM

+91 91810 15607 · connect@geekobot.in · Monday to Saturday, 10 AM to 2 PM IST

UPI · CARDS · NETBANKING · GST INVOICES

ShopProjectsGeeko AIGuides
Compare 0 parts →
Log in

Shop by category

Shop all components
  • Boards & SBCs1,910 products
    • Alternative Single Board Computers
    • Arduino Ecosystem
    • FPGA & Logic Boards
    • Microcontroller & Wireless Boards
    View all
  • Sensors & Modules4,701 products
    • Biomedical & Heart Rate
    • Current, Voltage & Power
    • Force, Weight & Pressure
    • Gas, Weather & Environmental
    View all
  • IoT & Wireless2,314 products
    • RF Modules
    • RFID & NFC
    • Antennas & RF Accessories
    • Cameras & Smart Vision
    View all
  • Drone & FPV3,558 products
    • Flight Control & Navigation
    • FPV Video & Optics
    • Frames & Structural Parts
    • Motors & Propulsion
    View all
  • 3D Printing2,204 products
    • 3D Printers
    • 3D Scanners & Digitizers
    • Laser Engravers & Cutters
    • Material Management & Upgrades
    View all
  • Filaments & Resins1,472 products
    • Filaments
    • Photopolymer Resins
    View all
  • Motors & Drivers463 products
    • BLDC Motor Drivers
    • DC & Geared Motors
    • DC Motor Drivers
    • Linear Actuators & Solenoids
    View all
  • Power & Batteries557 products
    • Battery Holders & Connectors
    • Breadboard Power
    • Chargers & BMS
    • DC-DC Converters
    View all
  • Semiconductors295 products
    • Diodes & Rectifiers
    • Interface & RF Encoder ICs
    • Logic ICs (74xx)
    • Logic ICs (CD4000)
    View all
  • Passive67 products
    • Capacitors
    • Circuit Protection
    • Crystals & Oscillators
    • Inductors
    View all
  • Displays & LEDs572 products
    • 7-Segment & Dot Matrix
    • Addressable LEDs
    • Character LCDs
    • Graphic LCDs
    View all
  • Switches & Relays184 products
    • Keypads & Touch
    • Push Buttons & Tactile
    • Relay Modules
    • Relays
    View all
  • Wires & Cables233 products
    • Board-to-Wire Connectors
    • Crimp & Splice
    • Headers & Dupont
    • Heat Shrink & Sleeving
    View all
  • Prototyping101 products
    • Breadboards
    • Interface Modules
    • PCBs & Perfboards
    View all
  • Tools & Test717 products
    • Bench Power Supplies
    • Hand Tools
    • Measuring Tools
    • Meters & Testers
    View all
  • Robotics180 products
    • Humanoid & Legged Robots
    • Robot Chassis & Platforms
    • Robotic Arms & Grippers
    • Wheels & Casters
    View all
  • STEM Kits268 products
    • Arduino Learning Kits
    • Coding & IoT Kits
    • Early Coding (Ages 3-8)
    • Invention Kits
    View all
  • Atal Tinkering Lab196 products
    • Package 1: Electronics, Robotics, IoT and Sensors
    • Package 2: Rapid Prototyping Tools
    • Package 3: Mechanical, Electrical and Measurement Tools
    • Package 4: Power Supply, Accessories and Safety Equipment
    View all
  • Mechanical Parts212 products
    • Bearings
    • Brackets & Mounts
    • Couplers
    • Fasteners & Standoffs
    View all
  • Audio109 products
    • Amplifier Modules
    • Buzzers & Sirens
    • Speakers
    View all
  1. Home
  2. ›Projects
  3. ›Closet board

Sensor projects

Server closet health board

Shows air temperature, humidity, rack-top temperature and vibration for a network closet.

By Geekobot Learning Team

Intermediate
Difficulty
2–3 hours
Build time
₹923
Parts cost
8
Parts
Arduino
Platform
Add all parts · ₹923Start building
  • Workshop & industry
  • Learning & classroom
NANO
Tap a part to see what it does
OverviewPartsWiringBuildCodeTroubleshootFAQIdeas

What you'll build

A small display on the closet door lets you see the state of the room each time you walk by, before a hot spell damages the switches.

What you'll learn

  • 1-Wire bus and pull-up resistors
  • Calibrated digital humidity sensors
  • Debouncing noisy digital signals
  • Drawing text on an I²C display
Safety

A learning and comparison aid, not a certified instrument.

  1. SenseSHT31 temperature and humidity, DS18B20 probe, SW-420 vibration sensor
  2. ThinkArduino Nano runs the sketch
  3. Act0.96" OLED

Parts list

Tick anything you already have and the total updates.

PartQtyPrice
  • NANO
    Nano CH340 Development Board (Soldered)
    GB-SBCD-0339Guide

    The brain of the project

    Works with the same pins and code as the original Arduino Nano.

    × 1₹185₹185
  • GY-SHT31-D Digital Temperature and Humidity Sensor Module – I2C Interface
    SENS-3434

    Accurate digital temperature (±0.3 °C) and humidity (±2 %) sensor from Sensirion, well suited to long-term room and storage monitoring.

    × 1₹379₹379
  • DS18B20 Waterproof Temperature Probe – 1m Cable
    SENS-3844

    Waterproof stainless-steel probe that reads liquid or soil temperature from −55 to +125 °C (±0.5 °C).

    × 1₹50₹50
  • SW-420 Vibration Sensor Module – Digital Output
    SENS-4362Guide

    Spring-type vibration switch with a comparator: the output goes high while it is being shaken.

    × 1₹42₹42
  • 0.96" OLED Display 128x64 (I2C)
    GB-DISP-0005Guide

    Crisp 128×64 monochrome screen over I²C.

    × 1₹167₹167
  • Resistor Assortment Kit (30 Values)
    GB-PASV-0002Guide

    4.7 kΩ pull-up between DATA and VCC

    × 1₹33₹33
  • Solderless Breadboard (830 points)
    GB-PROT-0001Guide

    Holds everything together without soldering

    × 1₹18₹18
  • Dupont Jumper Wires (40 pcs)
    GB-WIRE-0001Guide

    Connects the parts

    × 1₹49₹49

Complete kit

8 of 8 parts in one tap

₹923

GST included

3% off these parts while the whole kit stays in your cart

Parts you still need

₹923

8 of 8 parts. Tick anything you already have.

About ₹27,690 before bulk pricing for 30 kits.

Request bulk quote

Tools you'll need

  • Digital Multimeter
  • Wire Stripper and Cutter

Learn the parts

  • ESP32 vs Arduino Uno
  • Vibration, Shock and Tilt Sensors (SW-420, SW-520D)
  • MAX30102 Heart Rate and SpO2 Sensor Guide
  • I2C Explained
  • Arduino Uno

Calculators for this build

  • I²C pull-up resistor calculator
  • Temperature converter: °C, °F, K
  • UART, I²C and SPI transfer time calculator

Wiring

Follow the colours: red is power, dark grey is ground, blue is a signal.

PartPinConnect toNote
SHT31 temperature and humidityVCC5V
SHT31 temperature and humidityGNDGND
SHT31 temperature and humiditySCLA5
SHT31 temperature and humiditySDAA4
DS18B20 probeVCC5V
DS18B20 probeDATAD2
DS18B20 probeGNDGND
SW-420 vibration sensorVCC5V
SW-420 vibration sensorGNDGND
SW-420 vibration sensorDOD3
0.96" OLEDVCC5V
0.96" OLEDGNDGND
0.96" OLEDSCLA5
0.96" OLEDSDAA4
  • SHT31 temperature and humidityVCC → 5V
  • SHT31 temperature and humidityGND → GND
  • SHT31 temperature and humiditySCL → A5
  • SHT31 temperature and humiditySDA → A4
  • DS18B20 probeVCC → 5V
  • DS18B20 probeDATA → D2
  • DS18B20 probeGND → GND
  • SW-420 vibration sensorVCC → 5V
  • SW-420 vibration sensorGND → GND
  • SW-420 vibration sensorDO → D3
  • 0.96" OLEDVCC → 5V
  • 0.96" OLEDGND → GND
  • 0.96" OLEDSCL → A5
  • 0.96" OLEDSDA → A4
Built it? Check your wiring before you power up.Pick the pin each wire went to and we'll point out swapped pins, power mistakes and pins that clash.

Step-by-step build

0 of 10 done

Code

server_closet_health_board.inoVerify & upload in Electrolark
// Server closet health board
// Geekobot project library · board: Arduino Nano
// Wiring diagram, parts list and build steps: Geekobot project page "server-closet-health-board"

#include <Wire.h>
#include <Adafruit_SHT31.h>
#include <OneWire.h>
#include <DallasTemperature.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

// ---- pins ----
const uint8_t ONEWIRE_PIN = 2;
const uint8_t VIB_PIN = 3;

Adafruit_SHT31 sht31 = Adafruit_SHT31();
OneWire oneWire(ONEWIRE_PIN);
DallasTemperature probes(&oneWire);
Adafruit_SSD1306 oled(128, 64, &Wire, -1);

// ---- latest readings ----
float tempC = 0;
float humidity = 0;
float probeC = 0;
bool shake = false;

const unsigned long READ_EVERY_MS = 2000;
unsigned long lastRead = 0;
const char* statusText = "OK";

float readProbeC() {
  probes.requestTemperatures();
  return probes.getTempCByIndex(0);
}

void updateDisplay() {
  oled.clearDisplay();
  oled.setTextSize(1);
  oled.setCursor(0, 0);
  oled.print(F("Closet"));
  oled.drawLine(0, 10, 127, 10, SSD1306_WHITE);
  oled.setCursor(0, 14);
  oled.print(F("Temp: "));
  oled.print(tempC, 1);
  oled.print(F(" C"));
  oled.setCursor(0, 24);
  oled.print(F("Humidity: "));
  oled.print(humidity, 0);
  oled.print(F("%"));
  oled.setCursor(0, 34);
  oled.print(F("Probe: "));
  oled.print(probeC, 1);
  oled.print(F(" C"));
  oled.setCursor(0, 44);
  oled.print(F("Vibration: "));
  oled.print(shake ? F("YES") : F("no"));
  oled.setCursor(0, 56);
  oled.print(statusText);
  oled.display();
}

void setup() {
  Serial.begin(115200);
  if (!sht31.begin(0x44)) Serial.println(F("SHT31 not found"));
  probes.begin();
  pinMode(VIB_PIN, INPUT);
  if (!oled.begin(SSD1306_SWITCHCAPVCC, 0x3C)) Serial.println(F("OLED not found"));
  oled.setTextColor(SSD1306_WHITE);
  oled.clearDisplay();
  oled.display();
}

void loop() {
  if (millis() - lastRead < READ_EVERY_MS) return;
  lastRead = millis();
  tempC = sht31.readTemperature();
  humidity = sht31.readHumidity();
  probeC = readProbeC();
  shake = digitalRead(VIB_PIN) == HIGH;
  statusText = (!isnan(tempC) && !isnan(humidity) && probeC > -100) ? "OK" : "Sensor error";
  Serial.print(F("Temp="));
  Serial.print(tempC, 1);
  Serial.print(F("C"));
  Serial.print(F(", Humidity="));
  Serial.print(humidity, 0);
  Serial.print(F("%"));
  Serial.print(F(", Probe="));
  Serial.print(probeC, 1);
  Serial.print(F("C"));
  Serial.print(F(", Vibration="));
  Serial.print(shake ? F("yes") : F("no"));
  Serial.println();
  updateDisplay();
}

Run it: what this code does

The sketch above runs here on a simulated Arduino Nano. Move the sliders for the sensors and buttons it reads, and watch the Serial monitor, display and outputs change.

Troubleshooting

"SHT31 not found"+

Check SDA and SCL. An I²C scanner should show 0x44 or 0x45.

Humidity reads too high+

Keep the sensor out of condensing air and away from heat sources.

Probe reads −127 °C+

The 4.7 kΩ pull-up is missing or DATA is on the wrong pin. Check the yellow wire.

Never triggers+

Turn the trimmer and tap harder; loosely mounted modules absorb vibration.

Screen stays blank+

Check SDA/SCL and try address 0x3D. Run an I²C scanner to confirm.

Nothing happens after uploading+

Open the Serial Monitor at 115200 baud and check for messages. Make sure you chose the right board and port in the Arduino IDE.

Upload fails+

Close other programs using the serial port, try another USB cable (some are charge-only) and press reset just before uploading.

FAQ

Can I use an ESP32 instead of the Arduino?+

Yes. Most of the code works unchanged on an ESP32 with the ESP32 board package. Watch for 5 V modules: ESP32 pins are 3.3 V, so 5 V output signals need a resistor divider.

How do I power it without a computer?+

Use a 5 V USB phone charger or a power bank into the board's USB port.

What parts do I need to build the server closet health board?+

8 parts: Nano CH340 Development Board (Soldered), GY-SHT31-D Digital Temperature and Humidity Sensor Module – I2C Interface, DS18B20 Waterproof Temperature Probe – 1m Cable, SW-420 Vibration Sensor Module – Digital Output, 0.96" OLED Display 128x64 (I2C), Resistor Assortment Kit (30 Values), Solderless Breadboard (830 points) and Dupont Jumper Wires (40 pcs). Tools: Digital Multimeter and Wire Stripper and Cutter. On this page you can tick the parts you already have and add only the rest to your cart.

How hard is it and how long does it take?+

It is a intermediate project and takes about 2–3 hours. The build on this page has 10 steps.

Do I need to write the code myself?+

No. This page has the complete, tested code (server_closet_health_board.ino). Install these libraries first: Adafruit SHT31 Library, OneWire, DallasTemperature, Adafruit SSD1306 and Adafruit GFX Library.

Can I see what the code does before I build it?+

Yes. The Run it panel under the code runs this exact sketch on a simulated board. Move the sliders or press the buttons for the sensors it reads, and the Serial monitor, display and outputs react as they will on the real build. It is a simulation, so real readings depend on your parts and wiring.

How much does the server closet health board cost to build?+

About ₹923 for the parts at the prices on this page, plus tools if you do not have them. Quantity price breaks lower the cost when you build several.

What will I learn from this project?+

1-Wire bus and pull-up resistors; Calibrated digital humidity sensors; Debouncing noisy digital signals; Drawing text on an I²C display.

Is it safe to build?+

A learning and comparison aid, not a certified instrument.

What can I build next with these parts?+

Ideas that reuse this build: Server rack overheat alarm and Cold-chain door and temperature logger. They are listed under Take it further on this page.

Take it further

  • Server rack overheat alarm
  • Cold-chain door and temperature logger

Related projects

  • UNO
    Sensor
    Beginner· 1 hour

    LPG gas leak alarm

    A kitchen gas sniffer that beeps and flashes the moment LPG levels climb.

    ₹505 · 8 partsArduino
  • NANO
    Sensor
    Beginner· 1–2 hours

    Smoke alarm with OLED readout

    See the smoke level live on a crisp screen and get a loud warning when it spikes.

    ₹539 · 6 partsArduino
  • UNO
    Sensor
    Beginner· 45 minutes

    Flame detector fire alarm

    An infrared eye that spots an open flame and raises the alarm.

    ₹434 · 8 partsArduino
  • UNO
    Sensor
    Beginner· 1 hour

    PIR intruder alarm

    Walk into the room and it sounds the alarm: the classic first security build.

    ₹459 · 8 partsArduino

Learning project. Check every circuit and the datasheet of each part before you power it up.

Run itChange the inputs and watch the output
Closet
Temp: 25.9 C
Humidity: 55%
Probe: 26.0 C
Vibration: YES
OK
Serial monitor115200 baud
Temp=25.9C, Humidity=55%, Probe=26.0C, Vibration=yes

A simulation of the sketch above, so you know what to expect. Real readings vary with your parts and wiring.

Ask the Community

Ask a question Share your build