Shop by category
Shop all componentsOhm’s law & basics
In series the voltage splits roughly in inverse ratio to capacitance; add balancing resistors for electrolytics or supercaps. A bare number is read as µF.
Parallel: C = C1 + C2 + C3 + …Series: 1/C = 1/C1 + 1/C2 + 1/C3 + …10 µF, 22 µF and 4.7 µF. Parallel: 36.7 µF. Series: 1 ÷ (1/10 + 1/22 + 1/4.7) = 2.79 µF.
Capacitors combine the opposite way to resistors. In parallel their capacitance adds, which is how designers build bulk decoupling from several smaller parts. In series the total drops below the smallest capacitor, but the voltage rating effectively adds.
When you put electrolytic capacitors or supercapacitors in series, leakage differences can push one cell over its rating. A resistor across each one keeps the voltages balanced.
They add directly: C = C1 + C2 + C3. A 100 µF and a 47 µF in parallel give 147 µF.
It drops, like resistors in parallel: 1/C = 1/C1 + 1/C2. Two 100 µF in series give 50 µF.
To share a higher voltage. Two 2.7 V supercapacitors in series handle 5.4 V, but they need balancing resistors so neither cell is overcharged.
Parallel: C = C1 + C2 + C3 + …; Series: 1/C = 1/C1 + 1/C2 + 1/C3 + ….
10 µF, 22 µF and 4.7 µF. Parallel: 36.7 µF. Series: 1 ÷ (1/10 + 1/22 + 1/4.7) = 2.79 µF.
Results are estimates for design and learning. Check critical designs against the component datasheet. Made by the Geekobot Learning Team. How we write our calculators