Shop by category
Shop all componentsOhm’s law & basics
Series: R = R1 + R2 + R3 + …Parallel: 1/R = 1/R1 + 1/R2 + 1/R3 + …Two in parallel: R = (R1 × R2) ÷ (R1 + R2)220 Ω, 330 Ω and 1 kΩ. Series: 220 + 330 + 1000 = 1550 Ω. Parallel: 1 ÷ (1/220 + 1/330 + 1/1000) = 116.6 Ω.
Resistors in series add up, so you can build an odd value from stock parts. Resistors in parallel always give less than the smallest one, and share the current, which also spreads the heat.
Two equal resistors in parallel give exactly half the value. That is a handy trick when you need 50 Ω from two 100 Ω parts, or a higher power rating from two smaller resistors.
Just add them: R = R1 + R2 + R3. Two 1 kΩ resistors in series make 2 kΩ.
Use R = (R1 × R2) ÷ (R1 + R2). Two equal resistors in parallel give half the value, so two 1 kΩ make 500 Ω.
Yes. Adding a resistor in parallel always lowers the total, so the result is below the smallest value in the group.
Series: R = R1 + R2 + R3 + …; Parallel: 1/R = 1/R1 + 1/R2 + 1/R3 + …; Two in parallel: R = (R1 × R2) ÷ (R1 + R2).
220 Ω, 330 Ω and 1 kΩ. Series: 220 + 330 + 1000 = 1550 Ω. Parallel: 1 ÷ (1/220 + 1/330 + 1/1000) = 116.6 Ω.
Results are estimates for design and learning. Check critical designs against the component datasheet. Made by the Geekobot Learning Team. How we write our calculators